A beer dispensing system, often also called a dispensing system or beverage dispensing system, is the prerequisite for filling beer from beer kegs, for example kegs, into drinking glasses. Good quality should always be ensured here, as several factors need to be taken into account for a perfect result:
- Temperature
- Carbon dioxide content
- Tap pressure
A professional dispensing system is standard in a restaurant, bar or pub. However, a high-quality beer dispensing system with the right accessories will also ensure a great atmosphere at any party at home. Tapping your own beer is not only fun, the result can also be convincing in terms of flavour and makes the barley juice from bottles and even from the popular can kegs look old. However, it is important to have a high-quality dispensing system, the right settings and a little practice. With the offers in our online shop, you can always be sure that you are only buying premium products in brewery quality at the best price. We are also available by telephone to provide you with advice and assistance - benefit from more than 25 years of experience in the field of beverage taps and accessories.
How does a beer dispensing system work?
Tapping systems or dispensing systems all work very similarly. The beer hose and the pressurised gas line, which is connected to a CO2 cylinder, are connected to the beer keg via the keg cap (or dispensing head). A pressure reducer allows the carbon dioxide (CO2) to flow into the beer keg so that both the carbon dioxide is formed in the beer and the beer is forced through the beer hose via a riser pipe at the outlet of the tap head. In this way, the beverage reaches the actual dispensing system, where it is usually cooled wet by a dry beer cooler or beer cooler and can be tapped at the beer or tap. Incidentally, a 2 kg bottle ofCO2 is sufficient for around 500 litres of freshly tapped beer.
Everything for beer dispensing from a single source
As a long-standing supplier of beverage taps and accessories, we offer everything "from keg to glass" in our online shop. In addition to tapping systems, tap heads and beer coolers, we also offer everything you need for cleaning beverage tapping systems. Compare our prices in what is probably the largest online shop for beverage dispensing systems and accessories. We always try to offer you the best price on the Internet. If you find the same item cheaper on the Internet, please contact us.
Outlet 1/2 inch low headroom
Spout 1/2 inch low headroom for counter taps (40 mm low headroom) Aerator M24 x 1 AG plug-in chrome-plated 200 mm projection
Outlet spout Spout with thread black for beer tap Dispensing system outlet
Spout spout with thread black for beer tap beer tap dispensing system spout Outlet spout 60 mm with thread (13.5 mm diameter) For BT 50 and beer tap SK 196.002
Petrol pump, dispensing column, bridge dispensing column stainless steel
Petrol pump, dispensing column, bridge dispensing column stainless steel WITHOUT DISPENSING PILOTS Design: CNS matt-polished, CNS polished or TIN gold-coloured. Inspection opening at the bottom. Made from pipe and pipe bends. Made from 104 mm Ø tube. Height 452 mm, height MH 400 mm. Tap distance 110 mm. Matt stainless steel: 3-pipe, width 805 mm 4-pipe, width 915 mm 5-pipe, width 1,025 mm 6-pipe, width 1,135 mm 8-conductor, width 1,355 mm (delivery time approx. 3-4 weeks) Polished stainless steel: 3-wire, width 805 mm 4-wire, width 915 mm 5-conductor, width 1,025 mm 6-conductor, width 1,135 mm 8-conductor, width 1,355 mm (delivery time approx. 3-4 weeks) Polished stainless steel TIN gold coated (scratch-resistant): 3-wire, width 805 mm 4-wire, width 915 mm 5-conductor, width 1,025 mm 6-conductor, width 1,135 mm 8-pipe, width 1,355 mm (delivery time approx. 3-4 weeks) Please order dispensing taps in the dispensing taps section
Pistons for Rahrbach ERGO edge protectors
Pistons for Rahrbach ERGO edge fasteners adjustable for all ERGO fasteners
Plastic fan with seal
Plastic fan with seal Plastic fan for drums with bunghole, adjustable airflow
Plastic screw-in nozzles with 1/4" AG
Screw-in nozzles Plastic with 1/4“ AG Plastic screw-in nozzles 1/4“, 90°, NW 8 mm 1/4“, 90°, NW 10 mm
Plastic spacer sleeve for petrol pump
Discover our plastic spacer sleeves for petrol pumps! Properties: Insulating effect: The sleeve prevents condensation from forming on your beer dispenser. Accurate fit: With a radius of 104 mm on the outside and the matching counterpart on the inside. Quality: Made from high-quality plastic for a long service life. With our plastic spacer sleeves for beer dispensers, you can optimally insulate your tubular dispenser and protect it from moisture. Order the pair in black for 2 ltg. Pipe columns with a diameter of 114 mm. Perfect for your catering business!
Plastic tap
Plastic tap with seal New design: Excellent beverage flow easy to insert into the keg (manual tapping possible) with air holes (no dripping) with special seal Attention: Graduated price!From 100 pieces with advertising print possible against surcharge, please ask us for this article.
Plastic tap / stopcock Stopcock for wooden barrel Tap
Plastic tap / stopcock Stopcock for wooden barrel Tap excellent beverage flow easy to insert into the keg with air holes (no dripping) with special seal (26 mm ⌀) Tap length: approx. 15 cm
Plastic Y-connector Norma Group
Plastic Y-connector from 1 to 2 lines Plastic Y-connector Hose connector NW Nominal width (inner diameter) NW 4 mm POM NW 8 mm POM NW 10 mm POM
Plug-in coupling CC Beverage
Plug-in coupling CC Beverage 1/2” BSF Beverage, CC, red-black-long
Plug-in coupling for Pepsi Cola
Plug-in coupling for Pepsi Cola Push-fit coupling for Pepsi Cola - NC beverage 7/16” UNF beverage, NC, black
Plug-in coupling Pepsi Cola Co2
Push-fit coupling Pepsi Cola Co2 Push-fit coupling Pepsi Cola gas side 7/16” UNF-GAS, NC, grey
Plug-in mandrel for Lindr beer cooler air duct
Plug-in mandrel for Lindr beer cooler air duct consisting of plug-in mandrel for beer connection Stainless steel clamp Retaining ring
Premium beverage dispensing system set 1 conduit, 7 mm beer line
Premium beverage dispensing system set 1 pipe, 7 mm beer pipe With this dispensing system set, we offer you the opportunity to overhaul your dispensing system or to replace all relevant parts of the dispensing system. The dispensing head, Co2 pressure reducer and the stainless steel compensator tap are from the premium manufacturer Micro Matic. The dispensing system set consists of: 1 x beer hose NW 7 mm, length: 1.5 m, complete with 5/8" wing screw connection 1 x straight and 1 x 90° spout made of CNS 1 x CO2 hose NW 4 mm, length: 1.5 m, complete with 3/4" wing screw connection 2 x straight spout 1 x dispensing head, Micro Matic, for cellar tapping (please select the appropriate dispensing head from the selection menu) 1 x compensator tap, Micro Matic, polished stainless steel - 35 mm spigot 1 x CO2 pressure reducer, Micro Matic, 1-pipe, 3 bar 1 x carbon dioxide spanner Tap spanner
Premium beverage dispensing system set 2 conductors, 7 mm beer line
Beverage dispensing system premium set 2 conductors, 7 mm beer line With this dispensing system set, we offer you the opportunity to overhaul your dispensing system or to replace all relevant parts of the dispensing system. The dispensing heads, the Co2 pressure reducer and the stainless steel compensator taps are from the premium manufacturer Micro Matic. The dispensing system set consists of: 2 x beer hose NW 7 mm, length: 1.5 m, complete with 5/8" wing screw connection 1 x straight and 1 x 90° spout made of CNS 2 x CO2 hose NW 4 mm, length: 1.5 m, complete with 3/4" wing screw connection 2 x straight spout 2 x dispensing head, Micro Matic, for cellar tapping (please select the appropriate dispensing head from the selection menu) 2 x Micro Matic compensator tap, polished stainless steel - 35 mm spigot 1 x Micro Matic CO2 pressure reducer, 1-pipe, 3 bar 1 x carbon dioxide spanner Tap spanner
Pressure gauge 0 - 250 bar pressure reducer spare part repair dispenser display
Pressure gauge 0 - 250 bar pressure reducer spare part repair dispenser display Here you can repair your defective Co2 main pressure reducer yourself. This pressure gauge is protected by a metal casing. The pressure gauge shows the content pressure when the Co2 bottle is open. Teflon tape or metal adhesive is required to replace it. You can find the EuroLook metal adhesive here. Diameter: 60 mm / depth 30 mm Input at 3 o'clock
Pressure gauge 3bar for pressure reducer repair Co2 spare part dispenser
Manometer 3bar for pressure reducer repair Co2 spare part dispensing system Here you can repair your defective main pressure reducer yourself
Pressure gauge screw connections for test pressure gauges
Manometer screw connections R 3/4", R 1/2
Pump for mulled wine dispenser Flojet T5000130
Pump for mulled wine dispenser Flojet T5000130 Flojet pump T5000130 is suitable for fruit juice concentrates (without fruit pulp), tea, wine and other alcoholic beverages. Vacuum switch switches off automatically when box is empty. Suitable for operation with air, nitrogen and CO2 and can be regulated via gas/air supply. With quick-release fasteners. Designed for pumping up to 75,000 litres Mulled wine dispenser with compressed air pump with compressed air pump. Pump: Compressed air double diaphragm pump Output up to 7.6 litres / min. Inlet pressure max 0.7 bar Delivery pressure up to 5.5 bar Compressed air max 5.5 bar Temperature +1 °C to -49 °C Materials Polypropylene, Santoprene®, EPDM, stainless steel Approval NSF, FDA, CE, SK 290-001 Dry self-priming up to 4.5 m.
Pump for tapping beer without Co2
Pump for tapping beer without Co2 5/8“ for screwing onto a keg dispense head. Full metal design. Consisting of: Pump for beer dispensing Piston tap Hose with screw connection (Delivery WITHOUT KEG tap head) - For tap heads, please select the chapter Tapping fittings