Top seller
No results were found for the filter!
Gasket for beer cooler Gasket to beer cooler Cylinder cap gasket for sealing between beer tap back and beer cooler. For beer tap spigots with 14 x 8 mm recess.
£3.50
Spout grommet with thread black for tap beer... Outlet spout spout with thread black for tap beer tap dispenser outlet Spout 60 mm with thread (13,5 mm diameter) For BT 50 and dispensing tap SK 196.002
£5.51
Beer tap key beer tap dispensing system apfhahnschlüssel beer tap dispensing system Is needed to disassemble / assemble the piston tap / compensator tap during cleaning.
£2.75
Dummy plug for dispensing tower dispensing... Blind plug for dispensing tower dispensing system dispensing tower hole Do you have a hole in your dispensing tower? Or a tap that you never use? Then this blind plug is exactly the right thing for you. For cleanly closing unused tap...
£6.03
Tap cooling plate for auxiliary cooling Tap cooling plate for tracer cooling Brass nickel-plated H/W/D 48/40/15 mm, with 2 screw-in nozzles 1/4“, either NW 7 mm or NW 10 mm straight or bent. Plastic grommets must be glued in place on site using Loctite 405 instant...
£5.65
Plastic spacer sleeve Spacer sleeve made of plastic for pipe columns, consisting of sleeve for radius 104 mm outside and counterpart inside, insulating effect against condensation. Alternative: distance sleeve, plastic 2 conductive made of plastic, black,...
£1.64
Spout to beer tap Spout to beer tap Outlet spout to beer tap with thread to dispensing tap SK 196.002, short design, 9.5 mm Ø.
£3.94
Dispensing tap spigot fixing set Dispensing tap spigot fixing set consisting of: Dispensing tap rosette VA washer Rubber washer Counter nut 5/8 inch brass nickel plated You can use this set also for the assembly of our through spigots .
£3.76
Beer keg aerator basket keg aerator for KEG kegs Beer keg ventilator keg ventilator for KEG kegs For kegs with basket fitting
£2.50
Plastic fan with gasket Plastic ventilator with seal Plastic ventilator for drums with bunghole, air flow adjustable
£2.69
Dummy plug for dispensing dispenser dispensing... Dummy plug for dispensing column dispensing column Dummy plug for dispensing column, chrome Dummy plug with 4 mm thread
£5.83
Spacer sleeve for pipe columns Spacer sleeve for tubular columns consisting of sleeve for radius 104 mm outside and counterpart inside (inside unmachined).
£7.07
Through pipe 5/8" thread VA Through spigot 5/8 inch VA Thread on both sides Single table, without accessories, please order nuts + washers separately Through spigot: 7 mm inner diameter 10 mm inner diameter Length: 80 mm stainless steel 110 mm stainless steel 150...
£16.87
Spigot to CMB compensator tap extension Spigot to CMB compensator cock extension Threaded spigot to CMB compensator cock V10, V20 or BA1000, 5/8" thread extension (endless extendable) Available version: 25 mm extension, NW 7 mm 50 mm extension, NW 7 mm ATTENTION: Fits only to...
£17.69
Spacer sleeve for dispensing tap Spacer sleeve for dispensing tap Spacer sleeve for tap thread, plastic, chrome-plated. From 10 mm to 60 mm
£2.24
