A beer dispensing system, often also called a dispensing system or beverage dispensing system, is the prerequisite for filling beer from beer kegs, for example kegs, into drinking glasses. Good quality should always be ensured here, as several factors need to be taken into account for a perfect result:
- Temperature
- Carbon dioxide content
- Tap pressure
A professional dispensing system is standard in a restaurant, bar or pub. However, a high-quality beer dispensing system with the right accessories will also ensure a great atmosphere at any party at home. Tapping your own beer is not only fun, the result can also be convincing in terms of flavour and makes the barley juice from bottles and even from the popular can kegs look old. However, it is important to have a high-quality dispensing system, the right settings and a little practice. With the offers in our online shop, you can always be sure that you are only buying premium products in brewery quality at the best price. We are also available by telephone to provide you with advice and assistance - benefit from more than 25 years of experience in the field of beverage taps and accessories.
How does a beer dispensing system work?
Tapping systems or dispensing systems all work very similarly. The beer hose and the pressurised gas line, which is connected to a CO2 cylinder, are connected to the beer keg via the keg cap (or dispensing head). A pressure reducer allows the carbon dioxide (CO2) to flow into the beer keg so that both the carbon dioxide is formed in the beer and the beer is forced through the beer hose via a riser pipe at the outlet of the tap head. In this way, the beverage reaches the actual dispensing system, where it is usually cooled wet by a dry beer cooler or beer cooler and can be tapped at the beer or tap. Incidentally, a 2 kg bottle ofCO2 is sufficient for around 500 litres of freshly tapped beer.
Everything for beer dispensing from a single source
As a long-standing supplier of beverage taps and accessories, we offer everything "from keg to glass" in our online shop. In addition to tapping systems, tap heads and beer coolers, we also offer everything you need for cleaning beverage tapping systems. Compare our prices in what is probably the largest online shop for beverage dispensing systems and accessories. We always try to offer you the best price on the Internet. If you find the same item cheaper on the Internet, please contact us.
Mulled wine heater Mulled wine device with compressed air pump
Mulled wine heater Mulled wine device with compressed air pump Mulled wine dispenser for easy dispensing of mulled wine, punch, children's punch, Jagertee, Grog, Julischka Temperature setting infinitely variable 35° C to 85° C adjustable. Ready to plug in, ready to dispense in 10 minutes. With drip tray 520 mm deep, heated taps. Appliance with compressed air-driven pumps, here the pumps can be operated using either an air compressor N2 or CO2. With these appliances, the dispensing speed can be variably adjusted. Dimensions: W/D/H 295/520/465 mm Weight: 40 kg Dispensing capacity: 100 l/h 400 V, 50 Hz, 8,400 W, 12.5 A Mulled wine device With integrated compressed air pump
Nitrogen (N2) pressure reducer
Nitrogen (N2) pressure regulator 0-6/3 bar Connection right Outlet AG 3/4" Cylinder contents pressure gauge 0-400 bar SK 427-003
Nitrogen (N2) pressure reducer
Nitrogen (N2) pressure reducer 1-line, 7 bar Connection right Outlet AG 1/2" Cylinder contents pressure gauge 0-400 bar SK 427-002
Nitrogen (N2) pressure regulator ODL, 0-6/3 bar or 0-10/7 bar, SK 215.16
Nitrogen (N2) pressure reducer ODL, 0-6/3 bar or 0-10/7 bar, SK 215.16 with cylinder content indicator, grease-free ball shut-off valve without nozzle and nut. Nitrogen (N2) - pressure reducer ODL 3 bar (beer), On request with: wall plate + adapter for attaching the pressure reducer to the wall wall plate
Nitrogen bottle with filling
Nitrogen cylinder with filling RAL grey with rotary valve, with TÜV approval Steel cylinder with base and protective cage Ø=108 mm, total length 430 mm Nitrogen cylinder - 2 L with base and cage
Contents: 2 Kilogramm (£58.03 / 1 Kilogramm)
Nitrogen pressure regulator N2
Nitrogen pressure regulator N2 Premium Mirco-Matic type, 0-6/3 bar or 0-10/7 bar with cylinder content indicator, grease-free ball shut-off valve, without nozzle and nut. Nitrogen (N2) - Pressure regulator Micro-Matic Version: 3 bar (beer), 7 bar (AFG) On request with: Wall plate + adapter for attaching the pressure reducer to the wall Wall plate
Non-return ball Non-return ball keg tap head spare part
Non-return ball Non-return ball keg tap head spare part The set contains: 1 piece non-return ball 1 piece cage as ball lock
Non-return valve for Coka Cola drum
Non-return valve for cola keg CC 1/2” BSF beverage, CC
Nozzle 4 mm for Co2 hose beer hose on dispensing system
Nozzle 4 mm for Co2 hose beer hose on dispensing system is used on Co2 hoses / Material: nickel-plated brass, with seal Length: 28 mm Nipple length: 15 mm Nipple outer diameter: 5 mm Nipple inner diameter: 2.8 mm clamp required: 4 mm small (9.5 mm clamping range) required hose: 4 mm inside suitable nut: 5/8"; 3/4"; as hexagon or wing nut
Nut for imperial cola screw connections
Nut for imperial Cola fittings Nut for inch AFG fittingsVersion: Nut 1/2” NI, SW 16 for CC Nut 7/16” NI, SW 13 for NC
Nut for metric AFG fittings Cola
Nut for metric AFG fittings Cola Nut for metric Cola fittings Version: Nut 1/2” NI, SW 16 for CC Nut 7/16” NI, SW 13 for NC
Nut grommets set for Co2 hose 4 mm beer tap pressure reducer
Nut grommets set for Co2 hose 4 mm beer dispenser pressure reducer Set consists of: 2 pieces wing nuts 3/4" 2 pieces grommets straight 4 mm 2 pieces gasket for grommets 2 pieces 1 ear hose clamps with stainless steel bearing ring
Nut spout set beer hose 5/8" in 10 mm stainless steel 5/8 inch
Nut spout set beer hose 5/8" in 10 mm stainless steel 5/8 inch Set consists of: 2 wing nuts 5/8" (nickel-plated brass) 2 pieces spouts straight 10 mm (stainless steel) 2 seals 2 1-eared hose clamps with stainless steel insert ring
Nut spout set beer hose 5/8" in 7 mm
Nut spout set beer hose 5/8" in 7 mm Set consists of: 2 wing nuts 5/8" 2 pieces spouts straight 7 mm 2 gaskets 2 pieces 1-ear hose clamps with stainless steel insert ring
O2 warning device sensor set Mk9
O2 warning device sensor set Mk9 For extending your O2 detector set Mk9 4A or as a stand-alone device With the O2 warning device sensor set Mk9, you can expand your O2 detector set Mk9 4A and ensure reliable monitoring of the oxygen content in your environment. Thanks to its versatile functions, this sensor set is also suitable as a stand-alone detector. To use the O2 warning device sensor set Mk9 as a stand-alone device, you need the power supply 2363-4032, which is not included in the scope of delivery. Scope of delivery: CO2 detector Mk9 Horn/LED stroboscope including cable 10 m power/communication cable Plug lock 5 m signal cable 1 RJ45 1-4 plug, 1 RJ45 1-1 plug Manual + H/S sign With the O2 warning device sensor set Mk9, you can effectively secure your environment and create a safe working environment. Never miss any more warning signals and take the right measures in good time.
ODL, for CO2, N2 and mixed gas, SK 215.17
Intermediate pressure regulator ODL, for CO2, N2 and mixed gas, SK 215.17 Brass nickel-plated, with ball shut-off valve, without grommets and nuts. Intermediate pressure regulator ODL 1-pipe (beer), 3 bar, Attention: Wall bracket not suitable for R+J mounting panels. For this please order the article below separately. On request with: Wall plate + adapter for attaching the pressure reducer to the wall
Oetiker 1-ear clamps
1-ear clamps At a glance: • Quick, simple and secure installation • Specially moulded band edges reduce the risk of damage to the material to be clamped • Tying control through visibly completed forming of the clamp ear Material: • Stainless steel, material no. 1.4301 / UNS S30400 1-ear clamps 7.5 - 9 mm Clamping range, for NW 4 mm hoses 11.8 - 13.8 mm Clamping range, for NW 7 mm hoses 16.3 - 18.5 mm Clamping range, for NW 10 mm hoses
Oetiker 1-ear clamps stainless steel version with stainless steel insert ring
1-ear clamps stainless steel version with stainless steel insert ring At a glance: • Quick, easy and secure installation • Specially shaped band edges reduce the risk of damage to the material to be clamped • Clamp control through visible forming of the clamp ear • Flanged insert ring bridges the ear gap of the clamp ear, ensuring all-round binding Material: • Clamp: stainless steel, material no. 1.4301 / UNS S30400 • Bearing ring: Stainless steel, material no. 1.4310 / UNS S30100 1-Ear clamp design: 7.5 - 9 mm clamping range, for 4 mm CO2 hoses 8.5 - 10 mm clamping range, for 4 mm hoses 12.3 - 14.3 mm clamping range, for 7 mm hoses 16.5 - 18.8 mm clamping range, for 10 mm hoses
Oetiker 2 ear clamp
Oetiker 2 ear clamp Durable, good sealing thanks to robust design. For fluid and air lines, extended clamping range - thanks to the 2-eared design. Specially shaped band edges reduce the risk of damage to the material to be clamped, clamping check by visibly forming the clamp ear, quick, easy and secure installation Material: stainless steel, material no. 1.4301 / UNS S30400 2 ear clamp Design selectable: 7 - 9 mm clamping range, for NW 4 mm hoses 13 - 15 mm clamping range, for NW 7 mm hoses 15 - 18 mm clamping range, for NW 10 mm hoses
Oetiker stepless 1-ear clamp
Stepless 1-ear clamp At a glance: • 360° stepless design - no steps and/or overlaps on the inner circumference • Narrow band, concentrated clamping force transmission • specially shaped band edges reduce the risk of damage to the material to be tied • Weight-saving Design • Tying control through visible moulding of the clamping tube • Belt thickness 0.6 mm / belt width 7.0 mm Material: • Stainless steel, material no. 1.4301 / UNS S30400 1-ear clamps 17.8 - 21 mm Clamping range, for 1/2“ water hoses 23.9 - 27.1 mm Clamping range, for 3/4“ water hoses
Oetiker stepless 1-ear clamp
Stepless 1-ear clamp At a glance: • 360° stepless design - no steps and/or overlaps on the inner circumference • Narrow band, concentrated clamping force transmission • specially shaped band edges reduce the risk of damage to the material to be tied • Weight-saving Design • Tying control through visible moulding of the clamping tube • Belt thickness 0.6 mm / belt width 7.0 mm Material: • Stainless steel, material no. 1.4301 / UNS S30400 1-ear clamps 17.8 - 21 mm Clamping range, for 1/2“ water hoses 23.9 - 27.1 mm Clamping range, for 3/4“ water hoses
Operating log for beverage dispensing system Dispensing system Dispensing system Documentation Book
Operating log for beverage dispensing system Dispensing system Documentation book Contains pages printed on both sides for entering proof of cleaning