Beer tapping systems, beer coolers, dispensing systems and much more for tapping beer

Dispensing column Beer dispenser STAINLESS STEEL model Tera Here we offer you our popular beer dispenser model Terar. You can order the beer dispenser in various surface designs. Of course, this dispenser is also used in the catering trade. The beer dispenser is attached to the beer counter or beer bar using 4 x threaded rods Beer bar or counter counter. The fastening material is included in the scope of delivery. Technical specifications: Material: Stainless steel, with inspection flap for tap mounting Height: 460 mm, to centre of tap 400 mm Diameter of standpipe 104 mm Dispensing pipe diameter 114 mm 2 ltg. Width 310 mm, tap distance 110 mm 3 ltg. Width 530 mm, tap distance 145 mm 4 ltg. Width 530 mm, tap spacing 110 mm Design: Matt brushed stainless steel Polished stainless steel Polished stainless steel TIN-gold coloured (SCRATCH RESISTANT GOLD OPTICS) Scope of delivery: Dispensing column 4 x M8 threaded rods for fastening The dispensing column is supplied WITHOUT taps, please order these in the section Dispensing taps !

Dispensing tower Beer dispenser STAINLESS STEEL model Tower Here we offer you our popular Tower model beer dispenser. You can order the beer dispenser in various surface designs. The 2-pipe dispensers have a larger diameter so that you have more space when installing them. Of course, this dispenser is also used in the catering trade. The beer dispenser can be installed with a central threaded pipe with union nut in the beer counter or beer bar Beer bar or counter counter. Alternatively, you can also attach the beer dispenser with 2 x M8 threaded rods. Both mounting options are included in the scope of delivery. For the Tap Spacer sleeves adapted to the diameter are also Spacer sleeves are also included in the scope of delivery. Technical data of the beer dispenser: Material: Stainless steel, removable lid Height: 510 mm, to centre of tap 410 mm Diameter 80 mm or 114 mm 1 or 2 lines (for 1 or 2 taps) Design: Matt brushed stainless steel, 1-pipe, 80 mm Ø, 1-pipe, 114 mm Ø, 2-pipe 114 mm Ø, Polished stainless steel, 1-pipe, 80 mm Ø, 1-pipe, 114 mm Ø, 2-pipe 114 mm Ø, Polished stainless steel TIN-gold coloured (SCRATCH-RESISTANT GOLD OPTICS), 1-pipe, 80 mm Ø, 2-pipe 114 mm Ø, Scope of delivery Dispensing column: Dispensing column Central threaded tube for fastening 2 x M8 threaded rods for fastening adapted spacer sleeves for tap installation The dispensing column is supplied WITHOUT taps, please order these in the section Dispensing taps !

Dispensing tower Beer dispenser STAINLESS STEEL model Tower Here we offer you our popular Tower model beer dispenser. You can order the beer dispenser in various surface designs. The 2-pipe dispensers have a larger diameter so that you have more space when installing them. Of course, this dispenser is also used in the catering trade. The beer dispenser can be installed with a central threaded pipe with union nut in the beer counter or beer bar Beer bar or counter counter. Alternatively, you can also attach the beer dispenser with 2 x M8 threaded rods. Both mounting options are included in the scope of delivery. For the Tap Spacer sleeves adapted to the diameter are also Spacer sleeves are also included in the scope of delivery. Technical data of the beer dispenser: Material: Stainless steel, removable lid Height: 510 mm, to centre of tap 410 mm Diameter 80 mm or 114 mm 1 or 2 lines (for 1 or 2 taps) Design: Matt brushed stainless steel, 1-pipe, 80 mm Ø, 1-pipe, 114 mm Ø, 2-pipe 114 mm Ø, Polished stainless steel, 1-pipe, 80 mm Ø, 1-pipe, 114 mm Ø, 2-pipe 114 mm Ø, Polished stainless steel TIN-gold coloured (SCRATCH-RESISTANT GOLD OPTICS), 1-pipe, 80 mm Ø, 2-pipe 114 mm Ø, Scope of delivery Dispensing column: Dispensing column Central threaded tube for fastening 2 x M8 threaded rods for fastening adapted spacer sleeves for tap installation The dispensing column is supplied WITHOUT taps, please order these in the section Dispensing taps !

Dispensing tower Beer dispenser STAINLESS STEEL model Tower Here we offer you our popular Tower model beer dispenser. You can order the beer dispenser in various surface designs. The 2-pipe dispensers have a larger diameter so that you have more space when installing them. Of course, this dispenser is also used in the catering trade. The beer dispenser can be installed with a central threaded pipe with union nut in the beer counter or beer bar Beer bar or counter counter. Alternatively, you can also attach the beer dispenser with 2 x M8 threaded rods. Both mounting options are included in the scope of delivery. For the Tap Spacer sleeves adapted to the diameter are also Spacer sleeves are also included in the scope of delivery. Technical data of the beer dispenser: Material: Stainless steel, removable lid Height: 510 mm, to centre of tap 410 mm Diameter 80 mm or 114 mm 1 or 2 lines (for 1 or 2 taps) Design: Matt brushed stainless steel, 1-pipe, 80 mm Ø, 1-pipe, 114 mm Ø, 2-pipe 114 mm Ø, Polished stainless steel, 1-pipe, 80 mm Ø, 1-pipe, 114 mm Ø, 2-pipe 114 mm Ø, Polished stainless steel TIN-gold coloured (SCRATCH-RESISTANT GOLD OPTICS), 1-pipe, 80 mm Ø, 2-pipe 114 mm Ø, Scope of delivery Dispensing column: Dispensing column Central threaded tube for fastening 2 x M8 threaded rods for fastening adapted spacer sleeves for tap installation The dispensing column is supplied WITHOUT taps, please order these in the section Dispensing taps !

Beer dispenser, beer cooler 60 l/h, complete set We offer you a great beer dispenser in brewery quality. Tap beer like the professionals. This beer dispenser is hired out by many drinks retailers for parties or used by breweries for small events. The beer dispenser is therefore suitable for commercial use or also ideal for your home bar/cellar bar. The complete beer dispensing system consists of the following components: Beer cooler - continuous beer cooler VA beer case 1-pipe, 60 litres/h. with tap Delivery incl. drip tray. Tapping capacity continuous: 60 litres/h at 10° C TD Pipe diameter: NW 7 mm Line: 1 x beer Cooling capacity: 660 W/ 2,376 kJ/h (570 kcal/h) Voltage: 230 V, 50 Hz, 435 W, 3.3 A Compressor: 1/4 HP Dimensions: W/D/H 255/390/420 mm Weight: 27 kg Pressure reducer 0-6/3 bar, with content indicator, safety valve and ball shut-off valve KEG dispensing head with safety handle Customised design Co2 bottle NEW filled with 0.5 kg Co2, sufficient for approx. 100 litres of beer Beer and Co2 line 1.5 mtr. each with screw connection Ready to tap after 5 minutes!!! With invoice and 2 years warranty!!! Where can this beer dispenser be used? You can use this beer dispenser for your small catering business, beer garden, tap hire or even for private use at home. You only need the beer for this beer dispenser. If you have any questions about beer dispensing systems, just give us a call. We will also be happy to advise you on the subject of beer dispensing systems. Of course, we also offer useful accessories for cleaning the beer dispensing system, which you can find in the section BEER LINE CLEANING. Which KEG tap head is suitable for which beer keg? Read our Keg tap head blog article.

Beer dispenser, beer cooler 60 l/h, complete set with compensator tap Our high-quality beer dispensing system in modern matt black is the perfect choice for anyone who wants to dispense beer like a professional. This complete set is hired out by drinks retailers for events as well as being used by breweries for smaller events. It is therefore suitable for commercial use as well as for your own home bar or cellar bar. The beer dispenser consists of a beer cooler with a dispensing capacity of 60 litres per hour. The continuous cooler in matt black is equipped with a tap and comes with a drip tray. With a pipe diameter of 7 mm and a pipe for beer, it is perfectly suited for use in beer dispensing systems. The cooling capacity is 660 W, which enables a constant temperature of 10°C. Our beer cooler with tap has a voltage of 230 V and a weight of 27 kg. Thanks to the supplied pressure reducer with content indicator, safety valve and ball shut-off valve, you can easily regulate the pressure from 0-6/3 bar. The KEG dispensing head with safety handle ensures safe operation. Buy our beer dispenser now and enjoy freshly tapped beer like never before. Order today and benefit from our reliable delivery service. Don't miss out on this offer! The complete beer dispensing system consists of the following components: Beer cooler - Beer cooler beer case - matt black 1-pipe, 60 litres/h. with tap Delivery incl. drip tray. Tapping capacity continuous: 60 litres/h at 10° C TD Pipe diameter: NW 7 mm Line: 1 x beer Cooling capacity: 660 W/ 2,376 kJ/h (570 kcal/h) Voltage: 230 V, 50 Hz, 435 W, 3.3 A Compressor: 1/4 HP Dimensions: W/D/H 255/390/420 mm Weight: 27 kg Pressure reducer 0-6/3 bar, with content indicator, safety valve and ball shut-off valve KEG dispensing head with safety handle Customised design Co2 bottle NEW filled with 0.5 kg Co2, sufficient for approx. 100 litres of beer Beer and Co2 line 1.5 mtr. each with screw connection Ready to tap after 5 minutes!!! With invoice and 2 years warranty!!! Where can this beer dispenser be used? This beer dispenser is ideal for your small catering business, beer garden, beer dispenser hire or for private use at home. You only need the beer for this beer dispenser. If you have any questions about beer dispensing systems, just give us a call. We will also be happy to advise you on the subject of beer dispensers. Of course, we also offer useful accessories for cleaning the beer dispensing system, which you can find under the heading CLEANING THE BEER TAPS. Which keg tap head is suitable for which beer keg? Read our keg tap head blog article.

Beer dispenser with air compressor With this beer dispensing system, the integrated air compressor replaces the Co2 bottle. The air compressor is located inside the beer cooler and generates the overpressure in the beer keg, which then reaches the beer keg via the air pressure line and the keg dispensing head. This means you can also tap beer without a Co2 bottle. Function of the beer dispensing system with air compressor Conventional beer tapping systems require a carbon dioxide bottle for tapping beer. With this beer cooler, the air compressor can be switched on and off at the touch of a button. The air compressor generates approx. 2.4 bar in the beer keg; once the pressure is reached, the compressor switches off again automatically. What are the advantages of the beer dispenser with air compressor? The advantage of the beer dispensing system with air compressor is that you do not necessarily need a Co2 bottle and a Co2 beer pressure reducer to dispense beer. The highlight of our beer dispensing system with air compressor is that the air compressor can be switched on manually. This means that if you want to tap beer with Co2, this is also possible with the beer dispenser. Tapping capacity 1-pipe, 35 litres/h Tapping WITH and WITHOUT Co2 bottle Scope of delivery Beer cooler with integrated air compressor: Beer cooler 35 litre dispensing capacity/hour at temp. diff. 7.5°C Compensator tap Drip tray Beer pipe Air line KEG dispensing head of your choice Technical specifications: Housing made of stainless steel design polished sheet metal Tapping capacity continuous: 35 l/h at 7.5° C TD Line diameter: NW 7 mm Line: 1 x beer Voltage: 230 V, 50 Hz, 170 W, 1.16 A Compressor: 1/8 HP Dimensions: W/D/H 167/281 (incl. drip tray)/ 368 mm Weight: 14.5 kg, IDEAL FOR AT HOME!!!!! Which KEG tap head fits which beer keg? Read our Keg tapping head blog article.

Beer dispenser, beer cooler, beer case with/without tap 1-pipe, 60 litres in matt black We offer you here a top beer dispenser, beer cooler, beer case with single tap, 60 litres per hour dispensing capacity incl. drip tray. You can also order this beer dispenser without a tap using the selection menu. With our beer dispenser accessory sets you can complete this beer dispenser to a complete set, then you only need the beer. Where is this beer dispenser used? This beer dispenser, beer cooler and beer case are suitable for parties of up to 50 people. Well suited for private parties, small catering establishments and trade fairs. Technical data beer case: Tapping capacity continuous: 60 litres - h at 10° C TD Pipe diameter: NW 7 mm Pipe: 1 x beer Cooling capacity: 660 W/ 2,376 kJ/h (570 kcal/h) Voltage: 230 V, 50 Hz, 290 W, 3.3 A Compressor: 1/4 HP Dimensions: W/D/H 255/390/420 mm Weight: 27 kg Scope of delivery Beer case: black matt Drip tray stainless steel With or without beer tap depending on version or Further accessories: Beer tapping system accessory set

Special offer: Beer dispenser, beer cooler, beer case with tap 1-pipe, 60 litres We offer you here a top beer dispensing system, beer cooler, beer case with 1-pipe tap, 60 litres per hour dispensing capacity incl. drip tray. You can also order this beer dispenser without a tap or as an under-counter cooler via the selection menu. With our beer dispensing system accessory sets, you can complete this beer dispensing system into a complete set, then all you need is the beer. Where is this beer dispenser used? This beer dispenser, beer cooler and beer case are suitable for parties of up to 50 people. Well suited for private parties, small catering establishments and trade fairs. Technical data beer case: Tapping capacity continuous: 60 litres - h at 10° C TD Line diameter: NW 7 mm Line: 1 x beer Cooling capacity: 660 W/ 2,376 kJ/h (570 kcal/h) Voltage: 230 V, 50 Hz, 290 W, 3.3 A Compressor: 1/4 HP Dimensions: W/D/H 255/390/420 mm Weight: 27 kg Scope of delivery VA Beer case: Depending on the version, with beer tap or with through-spout as under-counter beer flow cooler. Further accessories: Beer tapping system accessory set

Beer dispenser 2 line 60 litres under-table complete set incl. dispensing column This under-counter beer dispenser 60 litres/h is a complete set. An under-counter wet beer flow cooler is used as the beer cooler. This has an agitator motor with an integrated accompanying cooling pump. The beer line can be cooled up to the dispensing tap using the accompanying cooling system *1. You only need the beer to dispense it yourself. Many of our customers install this 60 litre/h beer dispenser in their clubhouse, kiosk, exhibition stand or private bar. The beer dispenser we offer can be converted from an under-table beer dispenser to a mobile top-table beer dispenser in no time at all, making the beer dispenser very flexible to use. This complete beer dispenser set is available from us with a low price guarantee. If you have any questions about this item or would like advice, simply give us a call. Complete beer dispensing system consisting of: Beer cooler 2 litres, 60 litres/hour dispensing capacity with ice bank 75 litres/hour dispensing capacity 2 x beer pipe NW 7 with Samec pump for accompanying cooling with water level and temperature display, with water filler neck at the top of the lid Pump: 6/18 m head, 20/30 m pipe run Water tank: 20 litres Ice bank: 6.5 kg, 2,174 kJ/h (520 kcal/h) Cooling capacity: 505 W/ 1,818 kJ/h (430 kcal/h) Voltage: 230 V, 50 Hz, 350 W, 2.7 A Compressor: 1/5 HP Dimensions: W/D/H 340/515/415 mm Weight: 32 kg Compensator tap Stainless steel tower dispensing column 2ltg. Beer & Co2 line Co2 bottle - please select your desired Co2 bottle in the configurator Co2 pressure reducer KEG dispensing head of your choice, you can select this via the following link - Brewery KEG list - determine Application area of the beer dispenser 60 litres/h: Ideal for e.g. clubhouse, kiosk, exhibition stand or in your private bar to *1 - The corresponding Accompanying beer cooling line (beverage python) please order separately in the required length, this is not included in the scope of delivery.

Beer hose beer line complete 10 mm hard 1,7 mtr.  This hose consists of: 1,7 mtr. 10 mm beer hose with SK sign both sides with 5/8" connection each with wing nut  one bent grommet one straight grommet

Beer hose Beer pipe + Co2 hose complete for beer These hoses consist of: 1.7 mtr. 7 mm beer hose with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 1.7 mtr. 4 mm Co2 hose with SK mark with 3/4" connection on both sides, each with wing nut two straight nozzles

Beer hose Beer pipe complete 4 mm 2 mtr. This hose consists of: 2 mtr. 4 mm beer hose with SK mark with 5/8" connection on both sides a curved nozzle (stainless steel) with hexagon nut (connection to the tap) one straight spout (stainless steel) with wing nut

Beer hose Beer line complete 4 mm 2 mtr. tap system Beer hose in 4mm and 2m long, completely ready for use This beer hose is ideal for anyone who keeps their beer cold and uses a piston tap, e.g. for a beer bar (dispensing system with fridge). We recommend a working pressure of 0.9 - 1.2 bar, so that the beer can be tapped over a longer period of time without carbonising. This hose consists of: 2 mtr. 4 mm beer hose with SK mark with 5/8" connection on both sides a bent stainless steel nozzle with seal and hexagon nut one straight stainless steel spout with seal and wing nut We are happy to assemble the hoses according to your requirements, please contact us. Absolute hammer price!!! Brewery quality!!! For further hose material and connection material please click on Connection material

Beer hose Beer pipe complete 7 mm 1.7mtr. This hose consists of: 1.7 mtr. 7 mm beer hose with SK mark on both sides with 5/8" connection, wing nut + 6kt nut one bent spout one straight nozzle

Beer hose Beer pipe crystal clear 7 or 10 mm crystal clear Pressure load: 7 mm=9.7 bar, 10 mm=6.5 bar. PVC beer hose NW 7 mm (7 x 12 mm) NW 10 mm (10 x 16 mm) Price per metre. ATTENTION: GRADUATED PRICE !!!!

Beer hose Co2 hose nozzles nuts tapping system beer tapping system beer pipe 1.) Co2 spout straight 2.8 mm 1 piece is used on Co2 hoses / Material: nickel-plated brass, with seal Length: 28 mm Nipple length: 15 mm Nipple outer diameter: 5 mm Nipple inner diameter: 2.8 mm clamp required: 4 mm small (9.5 mm) required hose: 4 mm inside suitable nut: 5/8"; 3/4"; as hexagon or wing nut 2.) 2.7 mm beer hose nozzle straight 1 piece is used on beer and Co2 hoses / material: nickel-plated brass, with seal Length: 39 mm Nipple length: 20 mm Nipple outer diameter: 9.5 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 3.) 10 mm beer spout straight 1 piece can be used on beer and Co2 hoses / material: stainless steel, with seal Length: 35 mm Nipple length: 18 mm Nipple outer diameter: 11.5 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 4.) 7 mm hose nozzle bent 1 piece can be used on beer and Co2 hoses / material: nickel-plated brass, with seal Dimensions: 53 x 43 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nuts 5.) 10 mm hose nozzle bent 1 piece is used on beer and Co2 hoses / material: stainless steel (only available in stainless steel) with seal Dimensions: 53 x 53 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 10 mm required clamp: 10 mm (19.2 mm clamping range) required hose: 10 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 6.) 4 mm spout straight stainless steel 1 piece can be used on beer hoses / material: stainless steel, with seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 4 mm clamp required: 4 mm large (10.5 mm clamping range) required hose: 4 mm (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut Note! Difficult to fit in hose, hot air gun required. 7.) 7 mm spout straight stainless steel 1 piece is used on beer hoses / Material: stainless steel, with seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 8.) 10 mm spout straight stainless steel 1 piece can be used on beer hoses / material: stainless steel with moulded seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 12 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 9.) 4 mm spout bent stainless steel 1 piece can be used on beer hoses / material: stainless steel with seal Dimensions: 50 x 50 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 4 mm clamp required: 4 mm large (10.5 mm clamping range) required hose: 4 mm (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut Note! Difficult to fit in hose, hot air gun required. 10.) 7 mm spout bent stainless steel 1 piece is used on beer hoses / Material: stainless steel with seal Dimensions: 60 x 46 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 11.) 10 mm spout bent stainless steel 1 piece is used on beer hoses / material: stainless steel with moulded seal Dimensions: 56 x 52 mm Nipple length: 20 mm Nipple outer diameter: 12 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm soft or hard (inside) 12.) 3/4" wing nut brass 1 piece is used on CO2 hoses / material: nickel-plated brass fits over all nozzles shown above Inner dimension: approx. 26.16 mm 13.) 5/8" hexagon nut brass 1 piece is used on beer hoses / material: nickel-plated brass fits over all spouts shown above Internal dimension: approx. 22.63 mm Width across flats: 25 14.) 3/4" hexagon nut brass 1 piece is used on CO2 hoses / Material: nickel-plated brass fits over all nozzles shown above Internal dimension: approx. 26.16 mm Width across flats: 30 15.) 4 mm clamps small 10 pieces suitable for thin nozzles such as Co2 nozzle 2.8 mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 7.3 - 9.0 mm 16.) 4 mm clamps large 10 pieces suitable for thicker spouts such as beer spouts 4 mm stainless steel Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 8.5 - 10.5 mm 17.) 7 mm hose clamps 10 pieces suitable for beer and Co2 nozzle 7mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 12.3 - 14.8 mm 18.) 10 mm clamps 10 pieces suitable for beer and Co2 nozzle 10 mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 16.0 - 19.2 mm 19.) Clamping pliers 1 piece commercially available pinching pliers, required to pinch clamps around the grommets 20.) 4 mm hose by the metre Beverage hose with approved SK number 4 mm ID 8 mm OD up to 11 bar pressure load suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine slightly milky and very flexible for quantity=number of metres; delivery in one piece up to 200 mtr. 21.) 7 mm soft hose by the metre Beverage hose with approved SK number Size 7 x 12 mm suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine very soft, flexible and crystal clear Pressure load up to 3 bar for quantity=number of metres; delivery in one piece up to 50 mtr. 22.) 10 mm soft hose by the metre Beverage hose with approved SK number Size 10 x 15.6 mm suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine very soft, flexible and crystal clear Pressure load up to 3 bar for quantity=number of metres; delivery in one piece up to 50 mtr. 23.) 7 mm hard hose by the metre Beverage hose with approved SK number 7 mm ID 12 mm OD up to 8 bar pressure load suitable for all beverages e.g. beer, spirits, soft drinks or wine slightly milky and still flexible for quantity=number of metres; delivery in one piece up to 150 mtr. 24.) 10 mm hose hard by the metre Beverage hose with approved SK number 10 mm ID 16 mm OD up to 8 bar pressure load suitable for all beverages e.g. beer, spirits, soft drinks or wine slightly milky rigid, less flexible hose for quantity=number of metres; delivery in one piece up to 100 mtr. 25.) Co2 hose completely assembled 1.7 mtr. 1.7 mtr. Co2 hose with SK mark with 3/4" connection on both sides, each with wing nut two straight spouts 26.) 7 mm soft beer hose completely assembled 1.5 mtr. 1.5 mtr. 7 mm beer hose soft and crystal clear with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 27.) 7 mm beer hose hard completely assembled 1.7 mtr. 1.7 mtr. 7 mm beer hose with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 28.) 10 mm soft beer hose completely assembled 1.5 mtr. 5 mtr. 10 mm beer hose soft and crystal clear with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 29.) 10 mm beer hose hard completely assembled 1.7 mtr. 1.7 mtr. 10 mm beer hose with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout

Beer hoseCO2 hose for tapping systems 7mm soft crystal clear By the metre Item properties Beer hose for tapping systems: 1 metre beverage hose with approved SK number 7 mm ID 12 mm OD up to 3 bar pressure load very soft, flexible and crystal clear suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine Please specify how many metres you require in the quantity. Hose is supplied in one piece

Beer hose nozzle 10 mm straight with collar and shoulder, stainless steel Connection spout for beer screw connection, inner diameter 10 mm. The plastic seal on this beer connection is already moulded onto the stainless steel. With this beer spout, you can achieve a virtually gap-free connection and prevent germ formation in the beverage pipe connection. Also suitable for 1/2" AFG screw connection in conjunction with the bf-B826 seal . Material: Stainless steel ATTENTION: NOTE BATCH PRICES!!!(see below)

Beer hose nozzle 7 mm bent with collar and shoulder, stainless steel Connection spout for beer screw connection, inner diameter 7 mm. With this beer connection, the plastic seal is already moulded onto the stainless steel. With this beer spout, you can achieve a virtually gap-free connection and prevent germ formation in the beverage pipe connection. Material: Stainless steel/plasticATTENTION: NOTE BATCH PRICES!!!(see below)

Beer hose nozzle 7 mm straight with collar and shoulder, stainless steel Connection spout for beer screw connection, inner diameter 7 mm. The plastic seal on this beer connection is already moulded onto the stainless steel. With this beer spout, you can achieve a virtually gap-free connection and prevent germ formation in the beverage pipe connection. Material: Stainless steel/plastic ATTENTION: NOTE BATCH PRICES!!! (see below)

Beer hose nozzle stainless steel + union nut 5/8" hexagonal Spout in 10 mm Material: stainless steel, with seal Length: 39 mm Nipple length: 25 mm Nipple outer diameter: 12 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm (inside) hard or soft

Beer hose soft clear complete 10 mm 1.5 mtr. This hose consists of: 1.5 mtr. 10 mm beer hose, soft and crystal clear with SK mark 5/8" connection on both sides, each with wing nut one bent stainless steel spout one straight stainless steel spout

Beer hose soft clear complete 7 mm 1.5 mtr. This hose consists of: 1.5 mtr. 7 mm beer hose, soft and crystal clear with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout