Beer tapping systems, beer coolers, dispensing systems and much more for tapping beer
A beer dispensing system, often also called a dispensing system or beverage dispensing system, is the prerequisite for filling beer from beer kegs, for example kegs, into drinking glasses. Good quality should always be ensured here, as several factors need to be taken into account for a perfect result:
- Temperature
- Carbon dioxide content
- Tap pressure
A professional dispensing system is standard in a restaurant, bar or pub. However, a high-quality beer dispensing system with the right accessories will also ensure a great atmosphere at any party at home. Tapping your own beer is not only fun, the result can also be convincing in terms of flavour and makes the barley juice from bottles and even from the popular can kegs look old. However, it is important to have a high-quality dispensing system, the right settings and a little practice. With the offers in our online shop, you can always be sure that you are only buying premium products in brewery quality at the best price. We are also available by telephone to provide you with advice and assistance - benefit from more than 25 years of experience in the field of beverage taps and accessories.
How does a beer dispensing system work?
Tapping systems or dispensing systems all work very similarly. The beer hose and the pressurised gas line, which is connected to a CO2 cylinder, are connected to the beer keg via the keg cap (or dispensing head). A pressure reducer allows the carbon dioxide (CO2) to flow into the beer keg so that both the carbon dioxide is formed in the beer and the beer is forced through the beer hose via a riser pipe at the outlet of the tap head. In this way, the beverage reaches the actual dispensing system, where it is usually cooled wet by a dry beer cooler or beer cooler and can be tapped at the beer or tap. Incidentally, a 2 kg bottle ofCO2 is sufficient for around 500 litres of freshly tapped beer.
Everything for beer dispensing from a single source
As a long-standing supplier of beverage taps and accessories, we offer everything "from keg to glass" in our online shop. In addition to tapping systems, tap heads and beer coolers, we also offer everything you need for cleaning beverage tapping systems. Compare our prices in what is probably the largest online shop for beverage dispensing systems and accessories. We always try to offer you the best price on the Internet. If you find the same item cheaper on the Internet, please contact us.
CMB Dispensing nozzle for beer black, with compensator Do you love tapping your beer with style and precision? Then the CMB black beer dispenser is just the thing for you! With its compensator, it enables mobile dispensing and ensures the perfect beer experience. Product features: Colour: Black With compensator for precise dispensing For flawless enjoyment of freshly tapped beer Flat-sealing connection nozzle required (GZA11073) SKU: SK-168-009 Discover the world of perfect beer tapping with the CMB black beer tap nozzle!
Dispensing pump Dispensing pump 3- and 4-pipe Dispensing pump WITHOUT TAPS Finish: CNS matt-polished CNS polished Made from 108 mm Ø tube. With inspection flap at the bottom. Height: 454 mm, height MH 400 mm, base 60° inclined, tap distance 110 mm Width: 3-pipe, W 730 mm matt-finished 4-pipe, W 840 mm matt-polished 3-pipe, W 640 mm polished 4-pipe, W 770 mm polished Please refer to the chapter Dispensing taps order
Dispensing pump Dispensing pump model RJ5 WITHOUT DISPENSING TAPS Design: CNS matt-polished, 4 alternatively 5 ltg. CNS polished 4 alternatively 5 ltg. Made of stainless steel with 2 tubes 129 mm Ø and 88 mm Ø. Height 586 mm, height MH 396 mm, width 720 mm. The matching tap can be found in the chapter Dispensing taps
Dispensing pump Pisa model WITHOUT TAPS Finish: CNS matt brushed, CNS polished, TIN gold-coloured CNS coloured lacquered. tilted 10° to the right, made of 88 mm Ø chromium-nickel steel tube. Height: 550 mm, to centre of tap 400 mm. Please see chapter Dispensing taps section!
Co2 Druckminderer Set für Bierzapfanlage
- 1 x Co2 Druckminderer für Bierzapfanlage 0-6/3 bar
- 1 x montierte Bierleitung, beidseitig 5/8 Zoll Anschluss
- 1 x montierte Co2 Leitung, beidseitig 3/4 Zoll Anschluss
- 1 x Co2 Ringschlüssel
Dispensing tap Tap spigot mounting set consisting of: Tap rosette VA washer Rubber washer Lock nut 5/8 inch nickel-plated brass You can also use this set to fit our straight-through spigots.
Dispensing tap with compensator CM 100 plastic - CMB Manual black plastic, with compensator and pear handle. Large compensator, making it ideal for wheat beer. Plastic compensator tap Finish: Chrome 7 mm Chrome 10 mm Brass NW 7 mm Brass NW10 mm SK-168-009
Elbow connection 90° for connection of CO2 or beer lines. Without retaining ring (please order separately). 8 x 8 mm (RJ 4 mm to 4 mm) 12 x 8 mm (RJ 7 mm to 4 mm) 12 x 12 mm (RJ 7 mm to 7 mm) 16 x 16 mm (RJ 10 mm to 10 mm) ATTENTION: Graduated prices (see below)
Beer gland Nut 5/8“ (beer gland) on connector, Without locking ring (please order separately). Beer fitting 8 mm (RJ 4 mm) to 5/8“ 12 mm (RJ 7 mm) to 5/8“ ATTENTION: Graduated prices (see below)
Circlip for NW 4 mm and 8 mm outer diameter for NW 7 mm and 12 mm outer diameter for NW 10 mm and 16 mm outer diameter PACKAGING UNIT 10 pieces in a bag
DM Fit clamping and release aid DM Fit clamping and release aid suitable for all connectors, DM Fit plug-in mandrels Lindr beer pipe. 5 different sizes
Double connector for connecting CO2 or beer lines. Without retaining ring (please order separately). 8 x 8 mm (RJ 4 mm to 4 mm) 12 x 8 mm (RJ 7 mm to 4 mm) ATTENTION: Graduated prices (see below)
Double connector for connecting CO2 or beer lines. Without retaining ring (please order separately). 12 x 12 mm (RJ 7 mm to 7 mm) 16 x 12 mm (RJ 10 mm to 7 mm) 16 x 16 mm (RJ 10 mm to 10 mm) ATTENTION: Graduated prices (see below)
Plug-in mandrel JG 1/2“ x 3/8“ ATTENTION: Graduated prices (see below)
Push-in angle connector Without retaining ring (please order separately). 8 mm plug x 8 mm grommet, for 4 mm cable, 12 mm plug x 12 mm grommet, for 7 mm cable ATTENTION: Graduated prices (see below)
Reversing elbow for trace cooling line in the Python Without retaining ring (please order separately). Reversing bend Water NW 7 and 12 mm outer diameter Water NW 10 and 16 mm outer diameter ATTENTION: Graduated prices (see below)
Screw-in connector 1/4" AG (e.g. for CO2 wall manifold). Without retaining ring (please order separately). Screw-in connector 8 mm x 1/4" AG, (RJ 4 mm) ATTENTION: Graduated prices (see below)
T-connector Without retaining ring (please order separately ). T-connector for NW 4 and 8 mm outer diameter for NW 7 and 12 mm outer diameter ATTENTION: Graduated prices (see below)
Triple connector Y-piece (e.g. for connection of CO2 pipe) Without retaining ring (please order separately). Triple connector for NW 4 mm and 8 mm outer diameter ATTENTION: Graduated prices (see below)
Double beer hose nozzle made of stainless steel 1.4301 Double beer hose nozzle CNS NW 4 mm NW 7 mm NW 10 mm
Double beer hose nozzle Stainless steel connector for beer hose & Co2 hose With this beer hose nozzle or Co2 hose nozzle, you can quickly and easily extend a hose that is too short. The advantage over other double nozzles is that when extending the beer hose, a soft transition is created Transition, which means that the beer does not bump into each other. If the transition is too large, the beer will be pushed and this means foaming. NW 4 mm NW 7 mm NW 10 mm
Double beer hose nozzles Brass nickel-plated NW 7 mm NW 10 mm only available in CNS 4 mm Plastic, for CO2
Double grommet plastic double connector Hose connector in the following sizes: 12 mm to 10 mm POM, 12 mm to 8 mm POM, 10 mm to 8 mm POM, 4 mm plastic, for CO2
Double threaded nipple 2 x 5/8 inch stainless steel 5/8" AG on both sides Groove 14 x 8 mm. Double threaded nipple Inside diameter 7 mm Inner diameter 10 mm