Beer screw connection Co2 screw connection
Beer screw connections & CO₂ screw connections - secure connections for your dispensing system
Nozzle 4 mm for Co2 hose beer hose on dispensing system
Nozzle 4 mm for Co2 hose beer hose on dispensing system is used on Co2 hoses / Material: nickel-plated brass, with seal Length: 28 mm Nipple length: 15 mm Nipple outer diameter: 5 mm Nipple inner diameter: 2.8 mm clamp required: 4 mm small (9.5 mm clamping range) required hose: 4 mm inside suitable nut: 5/8"; 3/4"; as hexagon or wing nut
Nut grommets set for Co2 hose 4 mm beer tap pressure reducer
Nut grommets set for Co2 hose 4 mm beer dispenser pressure reducer Set consists of: 2 pieces wing nuts 3/4" 2 pieces grommets straight 4 mm 2 pieces gasket for grommets 2 pieces 1 ear hose clamps with stainless steel bearing ring
Nut spout set beer hose 5/8" in 10 mm stainless steel 5/8 inch
Nut spout set beer hose 5/8" in 10 mm stainless steel 5/8 inch Set consists of: 2 wing nuts 5/8" (nickel-plated brass) 2 pieces spouts straight 10 mm (stainless steel) 2 seals 2 1-eared hose clamps with stainless steel insert ring
Nut spout set beer hose 5/8" in 7 mm
Nut spout set beer hose 5/8" in 7 mm Set consists of: 2 wing nuts 5/8" 2 pieces spouts straight 7 mm 2 gaskets 2 pieces 1-ear hose clamps with stainless steel insert ring
Oetiker 1-ear clamps
1-ear clamps At a glance: • Quick, simple and secure installation • Specially moulded band edges reduce the risk of damage to the material to be clamped • Tying control through visibly completed forming of the clamp ear Material: • Stainless steel, material no. 1.4301 / UNS S30400 1-ear clamps 7.5 - 9 mm Clamping range, for NW 4 mm hoses 11.8 - 13.8 mm Clamping range, for NW 7 mm hoses 16.3 - 18.5 mm Clamping range, for NW 10 mm hoses
Oetiker 1-ear clamps stainless steel version with stainless steel insert ring
1-ear clamps stainless steel version with stainless steel insert ring At a glance: • Quick, easy and secure installation • Specially shaped band edges reduce the risk of damage to the material to be clamped • Clamp control through visible forming of the clamp ear • Flanged insert ring bridges the ear gap of the clamp ear, ensuring all-round binding Material: • Clamp: stainless steel, material no. 1.4301 / UNS S30400 • Bearing ring: Stainless steel, material no. 1.4310 / UNS S30100 1-Ear clamp design: 7.5 - 9 mm clamping range, for 4 mm CO2 hoses 8.5 - 10 mm clamping range, for 4 mm hoses 12.3 - 14.3 mm clamping range, for 7 mm hoses 16.5 - 18.8 mm clamping range, for 10 mm hoses
Oetiker 2 ear clamp
Oetiker 2 ear clamp Durable, good sealing thanks to robust design. For fluid and air lines, extended clamping range - thanks to the 2-eared design. Specially shaped band edges reduce the risk of damage to the material to be clamped, clamping check by visibly forming the clamp ear, quick, easy and secure installation Material: stainless steel, material no. 1.4301 / UNS S30400 2 ear clamp Design selectable: 7 - 9 mm clamping range, for NW 4 mm hoses 13 - 15 mm clamping range, for NW 7 mm hoses 15 - 18 mm clamping range, for NW 10 mm hoses
Oetiker stepless 1-ear clamp
Stepless 1-ear clamp At a glance: • 360° stepless design - no steps and/or overlaps on the inner circumference • Narrow band, concentrated clamping force transmission • specially shaped band edges reduce the risk of damage to the material to be tied • Weight-saving Design • Tying control through visible moulding of the clamping tube • Belt thickness 0.6 mm / belt width 7.0 mm Material: • Stainless steel, material no. 1.4301 / UNS S30400 1-ear clamps 17.8 - 21 mm Clamping range, for 1/2“ water hoses 23.9 - 27.1 mm Clamping range, for 3/4“ water hoses
Plastic screw-in nozzles with 1/4" AG
Screw-in nozzles Plastic with 1/4“ AG Plastic screw-in nozzles 1/4“, 90°, NW 8 mm 1/4“, 90°, NW 10 mm
Plastic Y-connector Norma Group
Plastic Y-connector from 1 to 2 lines Plastic Y-connector Hose connector NW Nominal width (inner diameter) NW 4 mm POM NW 8 mm POM NW 10 mm POM
Qute screw connection NW 10 for cooling coil
Compression fitting for cooling coil NW 10 consisting of - CNS double threaded nipple - Compression fitting
Reducer from 1/4 inch to 5/8 inch or 3/4 inch
Reducer from 1/4 inch to 5/8 inch or 3/4 inch Reducer from 1/4 inch to 5/8 inch or 3/4 inch made of nickel-plated brass. Can be used for Co2 wall manifold or Co2 pressure reducer repair. Available versions Reducer from 1/4 inch to: 1/4" male thread to 5/8" male thread 1/4" male thread to 3/4" male thread
Screw-in spout 4mm with 1/4 inch AG for Co2 pressure reducer dispensing system
Screw-in spout 4mm with 1/4 inch AG for Co2 pressure reducer tap system for 4 mm beer hose (inner diameter) suitable for pressure reducer or intermediate pressure regulator is simply glued with Eurolock metal adhesive Length: 38 mm Inner diameter: 2.8 mm Outer diameter of the nozzle: 5 mm
Screw-in spout spout 7mm with 1/4 inch AG for Co2 pressure reducer dispensing system
Screw-in spout 7mm with 1/4 inch AG for Co2 pressure reducer tap system for 7 mm beer hose (inner diameter) Suitable for pressure reducer or intermediate pressure regulator is simply glued with Eurolock metal adhesive Length: approx. 38 mm Inner diameter: 7 mm Outer diameter: 9 mm
Screw-in spouts Screw-in spout, nickel-plated brass /Closing plug / Connector
Screw-in spouts Screw-in spout Nickel-plated brass 1/4“ External thread NW 2.8 mm NW 7 mm NW 10 mm Screw plug 1/4“ AG Double-threaded nipple 2 x 1/4“ AG
Seal set repair beer hose Co2 hose nozzles
Sealing set repair beer hose Co2 hose nozzles Sealing set for beer hose (beer line), Co2 hose, taps, flow cooler, pressure reducer, intermediate pressure reducer, etc.The set contains: 5 pieces soft for beer hose 5 pieces hard for Co2 hose 5 pieces for main pressure reducer
Seals for beer screw connection and Co2
Seals for beer screw connection and Co2 Seals for 5/8'' beer screw connections Polythene rings 13 x 20 x 3 mm Rubber ring, black, soft, 13 x 20 x 3 mm PVC rings, crystal clear, 13 x 20 x 3 mm Seals for 1/2'' AFG fittings Polythene rings 13 x 18 x 3 mm Seals for 3/4'' CO2 fittings Polythene rings 13 x 23 x 2 mm Seals forCO2 pressure reducers Vulcanised fibre rings, 12 x 18 x 3 mm Attention: Graduated prices! (see above)
Through spigot 10 mm with 5/8 inch AG 80 mm threaded spigot Tap system Beer cooler
Through spigot 10mm with 5/8 inch male thread 80mm threaded spigot for beer coolers Through spigot 5/8" male thread 80 mm long with 10 mm flow and double-sided insertion for beer hose nozzles
Transition fitting 5/8" female, 3/4" male
Transition fitting 5/8“ IG, 3/4“ AG Caution: Please ADHESIVE with tight-sealing METAL ADHESIVE! See Adhesive
Unex hose clamp universal clamp screw clamp hose clamp stainless steel
Unex hose clamp universal clamp screw clamp hose clamp stainless steel This hose clamp (screw clamp) is ideal for hose connections that need to be loosened frequently. No tedious screwing with a screwdriver, the wing nut guarantees quick loosening and tightening Select your required size above: up to 19 mm diameter or up to 21 mm diameter
UNEX screw-on hose clamp
UNEX screw-on hose clamp UNEX hose clamp made of CNS with brass wing screw. Clamping range: up to 19 mm up to 21 mm up to 19 mm up to 21 mm
Wing nut 1/2" nickel-plated brass
Beer Wing fittings Wing nut 1/2“ Brass nickel-plated ATTENTION: STAFF PRICES NOTE!!! (see below)
Wing nut 3/4" nickel-plated brass
CO2 Wing fittings Wing nut 3/4“ Brass nickel-plated ATTENTION: STAFF PRICES NOTE!!! (see below)
Wing nut 5/8" nickel-plated brass
Wing nut 5/8" nickel-plated brass Beer wing fittings, wing nut 5/8 inch, nickel-plated brass ATTENTION: NOTE GRADUATED PRICES!!!