Beer screw connection Co2 screw connection
Beer screw connections & CO₂ screw connections - secure connections for your dispensing system
Co2 screw connection 3/4 inch 4 mm
Co2 screw fitting 4 mm consisting of: Co2 spout straight 4 mm Seal for beer hose nozzle hexagon nut 3/4 inch 1 ear clamp
Co2 screw connection 3/4 inch 4 mm-
Co2 screw fitting 4 mm consisting of: Co2 spout straight 4 mm Seal for beer hose nozzle Wing nut 3/4 inch 1 ear clamp
Co2 screw connection 3/4 inch 7 mm
Co2 screw fitting 7 mm consisting of: Co2 spout straight 7 mm Seal for beer hose nozzle hexagon nut 3/4 inch 1 ear clamp
Co2 screw connection 3/4 inch 7 mm
Co2 screw fitting 7 mm consisting of: Co2 spout straight 7 mm Seal for beer hose nozzle Wing nut 3/4 inch 1 ear clamp
Compression fitting consisting of compression spout
Compression fitting consisting of compression sleeve compression bush for thread G 5/8“. Compression fitting for hose 7 x 12 mm NW for hose 10 x 16 mm NW
Compression fitting for CO2 hose 4 mm NW,
Compression fitting for CO2 hose 4 mm NW, wireless with collar and shoulder, with hexagon nut ATTENTION: NOTE STACKED PRICES!!! (see below)
Compression fitting for CO2 hose 4 x 8 mm NW,
Compression fitting for CO2 hose 4 x 8 mm NW, wireless with 1/4" AG.
Compression fitting for steel pipe 8 x 0.5 mm
Compression fitting for steel pipe 8 x 0.5 mm (e.g. for 7 mm cooling coils) with hose nozzle for beer hose NW 7 mm Alternative: Double compression fitting with crimp fitting on both sides for steel pipe 8 x 0.5 mm
Cooling and stilling coil for beer made of CNS
Cooling and stilling coil for beer made of CNS Cooling and stabilising coil made of CNS NW 7 mm, complete with wall mounting. Dimensions: 10/10 cm square, 7 m long Pressure reduction approx. 0.1 bar/m coil=0.7 bar
Crimp ring for crimp connection
Crimp ring for CNS pipe 8 x 0.5 mm ATTENTION: STAFF PRICES NOTE!!! (see below)
Double beer hose nozzle made of 1.4301 stainless steel
Double beer hose nozzle made of stainless steel 1.4301 Double beer hose nozzle CNS NW 4 mm NW 7 mm NW 10 mm
Double beer hose nozzle Stainless steel connector for beer hose & Co2 hose
Double beer hose nozzle Stainless steel connector for beer hose & Co2 hose With this beer hose nozzle or Co2 hose nozzle, you can quickly and easily extend a hose that is too short. The advantage over other double nozzles is that when extending the beer hose, a soft transition is created Transition, which means that the beer does not bump into each other. If the transition is too large, the beer will be pushed and this means foaming. NW 4 mm NW 7 mm NW 10 mm
Double beer hose nozzles
Double beer hose nozzles Brass nickel-plated NW 7 mm NW 10 mm only available in CNS 4 mm Plastic, for CO2
Double spout plastic Norma Group
Double grommet plastic double connector Hose connector in the following sizes: 12 mm to 10 mm POM, 12 mm to 8 mm POM, 10 mm to 8 mm POM, 4 mm plastic, for CO2
Double threaded nipple 2 x 5/8 inch stainless steel
Double threaded nipple 2 x 5/8 inch stainless steel 5/8" AG on both sides Groove 14 x 8 mm. Double threaded nipple Inside diameter 7 mm Inner diameter 10 mm
Elbow fitting CNS 90° 5/8 inch
Elbow fitting CNS 90° 5/8 inch Elbow fitting CNS 90° 5/8 inch for tight installation conditions, with plastic elbow, complete with 5/8" hexagon nut and seal. Elbow fitting Version: NW 7 mm NW 10 mm ATTENTION: NOTE GRADUATED PRICES!!!
EURO LOCK metal adhesive screw lock
EURO LOCK metal adhesive screw lock EURO LOCK metal adhesive screw lock, fast curing, high strength. For securing and fastening screws, nuts and stud bolts against vibration and impact. Thread up to M 20
Contents: 0.05 Liter (£316.20 / 1 Liter)
Fabric bushing for compression fitting
Fabric bushing for CNS pipe, ATTENTION: STAFF PRICES NOTE!!! (see below)
Hexagon nut R 5/8" nickel-plated brass
Beer Hexagon fittings Hexagon nut R 5/8" Brass nickel-plated ATTENTION: STAFF PRICES NOTE!!! (see below)
High hexagon nut 5/8" brass
High Hexagon nut 5/8" Brass 19 mm high for Compression fittings ATTENTION: STAFF PRICES NOTE!!! (see below)
Leak detector spray OPN Chemi
Leak detector spray OPN Chemi Leak detector spray for detecting leaks in compressed air and gas pipework systems. Bottle with 400 ml, biodegradable. Bubble formation indicates a leak, even the finest hairline cracks. Use on all gas and compressed air lines, fittings, valves, pipework, gas cylinders, screw connections, pressurised containers. Use biocidal products with care. Always read the label and product information before use.
Contents: 0.4 Liter (£13.15 / 1 Liter)
Lock nut Nut 5/8" hexagonal Through spigot Tap tap Beer tap
Locknut Nut 5/8" hexagonal Through spigot Tap tap beer tap Hexagon lock nut 5/8 inch internal thread Height 5 mm
Non-return ball Non-return ball keg tap head spare part
Non-return ball Non-return ball keg tap head spare part The set contains: 1 piece non-return ball 1 piece cage as ball lock