Beer screw connection Co2 screw connection
Beer screw connections & CO₂ screw connections - secure connections for your dispensing system
7 mm beer hose nozzle nozzle straight beer hose Co2 is used on beer and Co2 hoses / Material: nickel-plated brass, with seal Length: 39 mm Nipple length: 20 mm Nipple outer diameter: 9.5 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut
Adapter 5/8 inch AG to 3/4 inch AG Co2 carbon dioxide tap connector Adapter made of nickel-plated brass from 5/8" AG to 3/4" AG
Adapter 5/8 inch IG to 3/4 AG Adapter Keg Co2 dispensing head dispensing system R-piece You need the adapter if you still have an old dispensing head (keg) where the Co2 connection is still designed with 5/8"
Adapter for AFG screw connection to beer tapping gun Our high-quality adapter allows you to easily connect your AFG screw fitting to your beer tapping gun. With a thread on the spout and a VA adapter, this adapter fits perfectly to a 1/2" CC x 6.7 mm spout. With this handy adapter, you can quickly and easily connect your tap gun to your AFG system to dispense your favourite beverages in style. Get your adapter today and enjoy effortless tapping!
Beer cooling and stilling coil stainless steel Beer cooling coil made of CNS for depressurisation NW 7 mm, complete with wall mounting. 6 cm square, approx. 4 m long Pressure reduction approx. 0.2 bar/m coil=0.8 bar.
Beer cooling coil made of stainless steel This cooling and calming coil made of stainless steel is perfect for keeping your beer at a pleasant drinking temperature. With dimensions of 11 x 0.5 mm and a length of 7 metres, it ensures efficient cooling. Features: NW: 10 mm Dimensions: 20.5 cm high, 14 cm Ø Available versions: rotated left and right Get this high-quality beer cooling coil made of stainless steel now and enjoy your beer chilled at all times. Cheers!
Beer hose Co2 hose nozzles nuts tapping system beer tapping system beer pipe 1.) Co2 spout straight 2.8 mm 1 piece is used on Co2 hoses / Material: nickel-plated brass, with seal Length: 28 mm Nipple length: 15 mm Nipple outer diameter: 5 mm Nipple inner diameter: 2.8 mm clamp required: 4 mm small (9.5 mm) required hose: 4 mm inside suitable nut: 5/8"; 3/4"; as hexagon or wing nut 2.) 2.7 mm beer hose nozzle straight 1 piece is used on beer and Co2 hoses / material: nickel-plated brass, with seal Length: 39 mm Nipple length: 20 mm Nipple outer diameter: 9.5 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 3.) 10 mm beer spout straight 1 piece can be used on beer and Co2 hoses / material: stainless steel, with seal Length: 35 mm Nipple length: 18 mm Nipple outer diameter: 11.5 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 4.) 7 mm hose nozzle bent 1 piece can be used on beer and Co2 hoses / material: nickel-plated brass, with seal Dimensions: 53 x 43 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nuts 5.) 10 mm hose nozzle bent 1 piece is used on beer and Co2 hoses / material: stainless steel (only available in stainless steel) with seal Dimensions: 53 x 53 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 10 mm required clamp: 10 mm (19.2 mm clamping range) required hose: 10 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 6.) 4 mm spout straight stainless steel 1 piece can be used on beer hoses / material: stainless steel, with seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 4 mm clamp required: 4 mm large (10.5 mm clamping range) required hose: 4 mm (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut Note! Difficult to fit in hose, hot air gun required. 7.) 7 mm spout straight stainless steel 1 piece is used on beer hoses / Material: stainless steel, with seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 8.) 10 mm spout straight stainless steel 1 piece can be used on beer hoses / material: stainless steel with moulded seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 12 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 9.) 4 mm spout bent stainless steel 1 piece can be used on beer hoses / material: stainless steel with seal Dimensions: 50 x 50 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 4 mm clamp required: 4 mm large (10.5 mm clamping range) required hose: 4 mm (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut Note! Difficult to fit in hose, hot air gun required. 10.) 7 mm spout bent stainless steel 1 piece is used on beer hoses / Material: stainless steel with seal Dimensions: 60 x 46 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 11.) 10 mm spout bent stainless steel 1 piece is used on beer hoses / material: stainless steel with moulded seal Dimensions: 56 x 52 mm Nipple length: 20 mm Nipple outer diameter: 12 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm soft or hard (inside) 12.) 3/4" wing nut brass 1 piece is used on CO2 hoses / material: nickel-plated brass fits over all nozzles shown above Inner dimension: approx. 26.16 mm 13.) 5/8" hexagon nut brass 1 piece is used on beer hoses / material: nickel-plated brass fits over all spouts shown above Internal dimension: approx. 22.63 mm Width across flats: 25 14.) 3/4" hexagon nut brass 1 piece is used on CO2 hoses / Material: nickel-plated brass fits over all nozzles shown above Internal dimension: approx. 26.16 mm Width across flats: 30 15.) 4 mm clamps small 10 pieces suitable for thin nozzles such as Co2 nozzle 2.8 mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 7.3 - 9.0 mm 16.) 4 mm clamps large 10 pieces suitable for thicker spouts such as beer spouts 4 mm stainless steel Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 8.5 - 10.5 mm 17.) 7 mm hose clamps 10 pieces suitable for beer and Co2 nozzle 7mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 12.3 - 14.8 mm 18.) 10 mm clamps 10 pieces suitable for beer and Co2 nozzle 10 mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 16.0 - 19.2 mm 19.) Clamping pliers 1 piece commercially available pinching pliers, required to pinch clamps around the grommets 20.) 4 mm hose by the metre Beverage hose with approved SK number 4 mm ID 8 mm OD up to 11 bar pressure load suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine slightly milky and very flexible for quantity=number of metres; delivery in one piece up to 200 mtr. 21.) 7 mm soft hose by the metre Beverage hose with approved SK number Size 7 x 12 mm suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine very soft, flexible and crystal clear Pressure load up to 3 bar for quantity=number of metres; delivery in one piece up to 50 mtr. 22.) 10 mm soft hose by the metre Beverage hose with approved SK number Size 10 x 15.6 mm suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine very soft, flexible and crystal clear Pressure load up to 3 bar for quantity=number of metres; delivery in one piece up to 50 mtr. 23.) 7 mm hard hose by the metre Beverage hose with approved SK number 7 mm ID 12 mm OD up to 8 bar pressure load suitable for all beverages e.g. beer, spirits, soft drinks or wine slightly milky and still flexible for quantity=number of metres; delivery in one piece up to 150 mtr. 24.) 10 mm hose hard by the metre Beverage hose with approved SK number 10 mm ID 16 mm OD up to 8 bar pressure load suitable for all beverages e.g. beer, spirits, soft drinks or wine slightly milky rigid, less flexible hose for quantity=number of metres; delivery in one piece up to 100 mtr. 25.) Co2 hose completely assembled 1.7 mtr. 1.7 mtr. Co2 hose with SK mark with 3/4" connection on both sides, each with wing nut two straight spouts 26.) 7 mm soft beer hose completely assembled 1.5 mtr. 1.5 mtr. 7 mm beer hose soft and crystal clear with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 27.) 7 mm beer hose hard completely assembled 1.7 mtr. 1.7 mtr. 7 mm beer hose with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 28.) 10 mm soft beer hose completely assembled 1.5 mtr. 5 mtr. 10 mm beer hose soft and crystal clear with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 29.) 10 mm beer hose hard completely assembled 1.7 mtr. 1.7 mtr. 10 mm beer hose with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout
Beer hose nozzle 10 mm straight with collar and shoulder, stainless steel Connection spout for beer screw connection, inner diameter 10 mm. The plastic seal on this beer connection is already moulded onto the stainless steel. With this beer spout, you can achieve a virtually gap-free connection and prevent germ formation in the beverage pipe connection. Also suitable for 1/2" AFG screw connection in conjunction with the bf-B826 seal . Material: Stainless steel ATTENTION: NOTE BATCH PRICES!!!(see below)
Beer hose nozzle 7 mm bent with collar and shoulder, stainless steel Connection spout for beer screw connection, inner diameter 7 mm. With this beer connection, the plastic seal is already moulded onto the stainless steel. With this beer spout, you can achieve a virtually gap-free connection and prevent germ formation in the beverage pipe connection. Material: Stainless steel/plasticATTENTION: NOTE BATCH PRICES!!!(see below)
Beer hose nozzle 7 mm straight with collar and shoulder, stainless steel Connection spout for beer screw connection, inner diameter 7 mm. The plastic seal on this beer connection is already moulded onto the stainless steel. With this beer spout, you can achieve a virtually gap-free connection and prevent germ formation in the beverage pipe connection. Material: Stainless steel/plastic ATTENTION: NOTE BATCH PRICES!!! (see below)
Beer hose nozzle stainless steel + union nut 5/8" hexagonal Spout in 10 mm Material: stainless steel, with seal Length: 39 mm Nipple length: 25 mm Nipple outer diameter: 12 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm (inside) hard or soft
Beer screw connection 10 mm consisting of: Beer hose nozzle straight 10 mm Seal for beer hose nozzle 6 ct. nut 5/8 inch 1 ear clamp
Beer screw connection 10 mm consisting of: Beer hose nozzle straight 10 mm Seal for beer hose nozzle Wing nut 5/8 inch 1 ear clamp
Beer screw connection 7 mm consisting of: Beer hose nozzle straight 7 mm Seal for beer hose nozzle 6 ct. nut 5/8 inch 1 ear clamp
Beer screw connection 7 mm consisting of: Beer hose nozzle straight 7 mm Seal for beer hose nozzle Wing nut 5/8 inch 1 ear clamp
Beer screw connection bent 10 mm consisting of: Beer hose nozzle bent 10 mm Seal for beer hose nozzle hexagon nut 5/8 inch 1 ear clamp
Beer screw connection bent 10 mm consisting of: Beer hose nozzle bent 10 mm Seal for beer hose nozzle Wing nut 5/8 inch 1 ear clamp
Beer screw connection bent 7 mm consisting of: Beer hose nozzle bent 7 mm Seal for beer hose nozzle hexagon nut 5/8 inch 1 ear clamp
Beer screw connection bent 7 mm consisting of: Beer hose nozzle bent 7 mm Seal for beer hose nozzle Wing nut 5/8 inch 1 ear clamp
Cellar connector Beer pipe Beer hose connector Double nipple Bar dispensing system You need this to connect two beer lines together when cleaning the beer line. 2x 5/8" external thread Inner diameter 10mm
Cellar connector for beer pipe cleaning Cellar connector for beer pipe cleaning, 5/8" thread on both sides with wing handle. Connector for beer pipe.
Clamping pliers pliers for clamps ear hose clamps Rabitz pliers These clamp pliers are ideal for 1 and 2 ear hose clamps
Cleaning adapter with Gardena connection In conjunction with the Gardena connection with 5/8“ internal thread, you can simply use your water hose with Gardena connection for cleaning