Beer tapping systems, beer coolers, dispensing systems and much more for tapping beer
A beer dispensing system, often also called a dispensing system or beverage dispensing system, is the prerequisite for filling beer from beer kegs, for example kegs, into drinking glasses. Good quality should always be ensured here, as several factors need to be taken into account for a perfect result:
- Temperature
- Carbon dioxide content
- Tap pressure
A professional dispensing system is standard in a restaurant, bar or pub. However, a high-quality beer dispensing system with the right accessories will also ensure a great atmosphere at any party at home. Tapping your own beer is not only fun, the result can also be convincing in terms of flavour and makes the barley juice from bottles and even from the popular can kegs look old. However, it is important to have a high-quality dispensing system, the right settings and a little practice. With the offers in our online shop, you can always be sure that you are only buying premium products in brewery quality at the best price. We are also available by telephone to provide you with advice and assistance - benefit from more than 25 years of experience in the field of beverage taps and accessories.
How does a beer dispensing system work?
Tapping systems or dispensing systems all work very similarly. The beer hose and the pressurised gas line, which is connected to a CO2 cylinder, are connected to the beer keg via the keg cap (or dispensing head). A pressure reducer allows the carbon dioxide (CO2) to flow into the beer keg so that both the carbon dioxide is formed in the beer and the beer is forced through the beer hose via a riser pipe at the outlet of the tap head. In this way, the beverage reaches the actual dispensing system, where it is usually cooled wet by a dry beer cooler or beer cooler and can be tapped at the beer or tap. Incidentally, a 2 kg bottle ofCO2 is sufficient for around 500 litres of freshly tapped beer.
Everything for beer dispensing from a single source
As a long-standing supplier of beverage taps and accessories, we offer everything "from keg to glass" in our online shop. In addition to tapping systems, tap heads and beer coolers, we also offer everything you need for cleaning beverage tapping systems. Compare our prices in what is probably the largest online shop for beverage dispensing systems and accessories. We always try to offer you the best price on the Internet. If you find the same item cheaper on the Internet, please contact us.
Underflush pipe for 220 mm basin for mixer taps and cold water taps. Chrome-plated With knurled nut for 220 mm deep basin (220 mm long)
Unex hose clamp universal clamp screw clamp hose clamp stainless steel This hose clamp (screw clamp) is ideal for hose connections that need to be loosened frequently. No tedious screwing with a screwdriver, the wing nut guarantees quick loosening and tightening Select your required size above: up to 19 mm diameter or up to 21 mm diameter
UNEX screw-on hose clamp UNEX hose clamp made of CNS with brass wing screw. Clamping range: up to 19 mm up to 21 mm up to 19 mm up to 21 mm
Top part 1/2“ with crown handle chrome for mixer tap cold water hot water
USB-Mobus interface for LogiCO2 gas detection system The USB Modbus interface allows you to easily connect your LogiCO2 CO2 safety system to your desktop computer for smooth digital communication with LogiCO2 CO2 sensors. With the supplied shielded cable (3 metres long) and the RJ45 connection, nothing stands in the way of a stable connection. Together with the various LogiCO2 software versions, this USB-MODBUS interface connection even offers you visual indicators with 2 LEDs (Rx and Tx) and supports speeds of up to 1 MB. The USB485-MB45 is a reliable 2-wire RS485 adapter with automatic receive/transmit switching and an RJ45 connection in accordance with Modbus specifications. Thanks to the 2.5 kV isolation barrier, it provides high-quality galvanic isolation between your PC and the remote device. This means that your PC is optimally protected, even if the remote device fails. With its simple installation and operation, the USB Modbus interface adapter is ready for use in no time at all. Simply connect the sensor, install the drivers and use it as usual. Your safety is a top priority, and this practical USB Modbus interface for LogiCO2 gas detection system ensures that.
Piston tap V20 made of stainless steel Housing CNS polished, matt or CNS gold-plated. With foam button. Housing, piston and thread made of CNS. Threaded spigot 55 mm. SK-168-013
Dispensing column WITHOUT TAPS Wall bar made of stainless steel Opening in the rear wall for passing through the beer lines, with fastening option. Wall bar Dimensions: W/D/H 3-pipe, 500/150/180 mm, 4-pipe, 600/150/180 mm Please order taps in the taps section
Wall bracket for keg dispensing head The wall holder for keg dispensing head is a practical and space-saving parking holder for all standard keg dispensing heads. With this wall holder, you can finally find a safe place to store your keg tap head. Advantages: Brewery quality: This wall holder has been manufactured to the highest quality to keep your tap head safe and stable. Affordable: Our affordable price means you get a high-quality solution for storing your KEG tap head. Available for immediate delivery: Order today and receive your wall holder quickly and reliably delivered directly to your doorstep. The wall holder for keg tap head offers you a practical solution for keeping your tap head safe and within easy reach at all times. Create order and save valuable space in your catering establishment or your own home. With this wall holder, you will always have your tap head in the right place.
Wall bracket for pressure reducer for mounting the CO2-AFG pressure reducer type OXYTURBO MAJOR PLUS on the wall
Wall bracket made of stainless steel, recessed on both sides 14 x 8 mm, with mounting bracket made of CNS. Wall bracket NW 7 mm NW 10 mm
Waterbath satellite cooler Combi-cooler for accompanying and Continuous cooling for connection to central cooling Stainless steel waterbath satellite cooler, for connection to on-site refrigeration unit, Medi 4-pipe, 4 beer cooling coils Please specify: NW 7 or 10 mm! Cooling capacity: 1,100 W/ 3,960 kJ/h (946 kcal/h) Water tank: 27 litres Pump: 20 m pipe run / 6 m headroom Supplied with R134a expansion valve, solenoid valve and thermostat. Water bath satellite cooler, combi cooler Required compressor cooling capacity: 400 W at -10° C evaporation. Dimensions: W/D/H 365/455/475 mm Weight: 20 kg
Waterbath satellite cooler Combi-cooler for accompanying and Continuous cooling for connection to central cooling Stainless steel waterbath satellite cooler, for connection to on-site refrigeration unit, Maxi 6-pipe, 6 beer cooling coils Please specify: NW 7 or 10 mm! Cooling capacity: 1,510 W/ 5,436 kJ/h (1,300 kcal/h) Water tank: 48 litres Pump: 20 m pipe run / 6 m headroom Supplied with R134a expansion valve, solenoid valve and thermostat. Water bath satellite cooler, combi cooler Required compressor cooling capacity: 800 W at -10° C evaporation. Dimensions: W/D/H 495/405/550 mm Weight: 22 kg
Water bath satellite cooler Trace cooling for connection to central cooling system Stainless steel waterbath satellite cooler, with R134a control for connection to on-site refrigeration unit. Cooling capacity: 620 W/ 2,232 kJ/h (532 kcal/h) Water tank: 8.7 litres Pump: 20 m pipe run / 6 m headroom Supplied with R134a expansion valve, solenoid valve and thermostat. Water bath satellite cooler, heat exchanger Required compressor cooling capacity: 300 W at -10° C evaporation. Dimensions: W/D/H 350/310/475 mm Weight: 15 kg
Waterbath satellite cooler Trace cooling for connection to central cooling Stainless steel waterbath satellite cooler, with R134a control for connection to on-site refrigeration unit. Cooling capacity: 620 W/ 2,232 kJ/h (532 kcal/h) Water tank: 8.7 litres Pump: 30 m pipe run / 18 m headroom Supplied with R134a expansion valve, solenoid valve and thermostat. Water bath satellite cooler, heat exchanger Required compressor cooling capacity: 300 W at -10° C evaporation Dimensions: W/D/H 350/310/515 mm Weight: 17 kg
Water compensator tap Rapid tap for 5/8 inch tap hole with compensator Self-closing, Trapezoidal handle with John Guest quick connector for 8 mm OD hose .
BLUGLASS ONE Tower 3W water dispenser The stylish Bluglass design for a water dispenser with minimal counter space, professional performance and truly unique elegance. This water dispenser is made of tempered glass and - like all other Bluglass coolers - of high-quality stainless steel. All the electronics are integrated inside the appliance. In addition, an individually adjustable "Portion Control" function is available for convenient and rapid dispensing, at an extra charge. Can be adapted to any undercounter cooler. The stylish Bluglass design for a water dispenser with minimal counter space requirements, professional performance and truly unique elegance. Optional: UV Ou Dimensions W/D/H mm: 142/209/455 Weight: 8 kg Dispensing zone mm: 260 Water types: 3 different types possible
Water dispenser for sparkling water Dispensing column for table-top installation, specially designed for dispensing sparkling water and table water. Aqua column chrome-plated - 3 litres with lever still uncooled, still cooled, Co2 water cooled Height 350 mm, Tap height 243 mm Weight: 2.4 kg Threaded connection G 3/4"
Water pressure reducer with plastic housing Grivory handle black / connection G1/4" Control range 0.5 - 10 bar 1 pressure gauge Ø 40 mm 0 - 10 bar Connection G1/8" mounted on the back Mounting nut for retaining bracket mounted
Wet beer cooler 2 ltg., 60 ltr./h with accompanying cooling Beer cooler "Messebau" 2 ltg., 60 ltr./h tapping capacity with ice bank 75 ltr./h tapping capacity 2 x beer pipe NW 7 / 2 x NW10 with Samec pump for accompanying cooling with water level indicator, with water filler neck at the top of the lid Pump: 6/18 m head, 20/30 m pipe run Water tank: 20 litres Ice bank: 6.5 kg, 2,174 kJ/h (520 kcal/h) Cooling capacity: 739 W/ 2639 kJ/h (631 kcal/h) Voltage: 230 V, 50 Hz, 450 W, 3.7 A Compressor: 1/5 HP Dimensions: W/D/H 340/515/415 mm Weight: 32 kg This wet beer cooler is particularly suitable as an under-counter beer flow cooler for "small" catering establishments or trade fairs. Thanks to the integrated accompanying cooling pump, the beer is cooled right up to the tap. Even with longer breaks between taps, there is no loss of cold and you can tap a perfect beer directly without increased foam content. You can find more beer coolers, wet beer flow coolers HERE:
Wet cooling unit / AFG cooling unit 6-pipe, 100 litres/h with water level indicator Combi, trace and continuous cooling in one appliance. Continuous tap capacity: 100 litres/hour at 10° C TD Line: 6 Water tank: 40 litres Ice bank: 10.5 kg, 3,516 kJ (840 kcal) Cooling capacity: 1,363 W / 4,868 kJ/h (1,164 kcal) Voltage: 230 V / 50 Hz, 790 W, 5.67 A Compressor: 3/4 HP Housing material: Stainless steel Dimensions W/D/H / Weight: 627/407/607 mm / 49.5 kg 6 m climbing height, 20 m pipe run Accompanying cooling UTK or OTK
Wet cooling unit / AFG cooling unit 6-pipe, 60 litres/h with water level indicator Combi, trace and continuous cooling in one appliance. Continuous tap capacity: 60 litres/hour at 10° C TD Line: 6 Water tank: 17 litres Ice bank: 6.5 kg, 2,176 kJ (520 kcal) Cooling capacity: 739 W / 2,660 kJ/h (636 kcal) Voltage: 230 V / 50 Hz, 400 W, 2.6 A Compressor: 1/3 HP Housing material: Stainless steel Dimensions W/D/H / Weight: 543/355/415 mm / 29.5 kg 6 m climbing height, 20 m cable run Accompanying cooling UTK or OTK
Wet cooling unit BN 500 4-pipe, 500 litres/h Continuous cooling, ice water generation, Waterbath cooling unit - Cooling coils of your choice Please specify: NW 10 mm! Stainless steel housing Ready to dispense in 120 minutes. The footprint is no larger than the size of a EURO pallet. This makes transport easy despite its heavy weight. Can also be used individually for industrial cooling thanks to the different cooling coil configurations, the trace cooling pump and the control unit. Two separate refrigeration circuits. Even if one compressor fails, continues to cool at 50% capacity. Continuous flow volume of 800 l/h (increases due to ice bank in surge operation)! Continuous dispensing capacity: 500 L/h at 10° C TD Pipe diameter: NW 10 mm or 15 mm Pipes: 4 x beer Pump: 6/18/2 x 18 m head Ice bank: 100 kg/800 litres, 33,440 kJ/h (8,000 kcal/h) Cooling capacity: 5.815 W/ 20,900 kJ/h (5,000 kcal/h) Voltage: 230 V, 50 Hz, 2,560 W, 14 A Compressor: 2 x 1 1/3 HP Dimensions 10 mm appliance: W/D/H 900/1,200/805 mm Weight 10 mm appliance: 160 kg ALSO AVAILABLE WITH STRONGER PUMPS FOR AN ADDITIONAL CHARGE