Tapping fittings & dispensing system accessories for the catering trade
All kegs without a built-in tap need to be tapped in order to access the contents. Modern aluminium kegs, such as a 5-litre party keg or the keg used in the catering trade, either have a built-in tap or a special valve for connecting a keg tap head to the dispensing system.
In our extensive online shop, you will find everything you need for perfectly tapped beer - fromCO2 bottles to pressure reducers and beer stopcocks. We only offer items of professional quality:
Intermediate pressure regulator ODL, for CO2, N2 and mixed gas, SK 215.17 Brass nickel-plated, with ball shut-off valve, without grommets and nuts. Intermediate pressure regulator ODL 1-pipe (beer), 3 bar, Attention: Wall bracket not suitable for R+J mounting panels. For this please order the article below separately. On request with: Wall plate + adapter for attaching the pressure reducer to the wall
Pressure gauge 0 - 250 bar pressure reducer spare part repair dispenser display Here you can repair your defective Co2 main pressure reducer yourself. This pressure gauge is protected by a metal casing. The pressure gauge shows the content pressure when the Co2 bottle is open. Teflon tape or metal adhesive is required to replace it. You can find the EuroLook metal adhesive here. Diameter: 60 mm / depth 30 mm Input at 3 o'clock
Manometer 3bar for pressure reducer repair Co2 spare part dispensing system Here you can repair your defective main pressure reducer yourself
Safety valves for Co2 pressure reducers Safety valve with seal as a spare part for your Co2 pressure reducer. We offer the following variants: 3 bar, 1/4 inch (13 mm thread) 3 bar, 3/8 inch (16.5 mm thread) 7 bar, 1/4 inch (13 mm thread)
Seals for nitrogen pressure reducers & Co2 pressure reducers Seals for N2 nitrogen pressure reducers Polyamide seals, 11.8 x 20 x 3 mm Price PU 100 pieces Seals for CO2 pressure reducers Vulcanised fibre rings, 12 x 18 x 3 mm Price per 100 units, Polyamide seals, 11.8 x 18 x 3.7 mm Price per 100 units,
Contents: 100 Stück (£0.21 / 1 Stück)
SHURflo pumps Universal pump SK 232-009, complete with all compressed air connections NW 4 mm and beer hose nozzles optionally for 7 mm or 10 mm NW. Bypass of the pump with 3-way stopcocks possible. For mechanical cleaning As the pressurised gas (CO2, N2 or compressed air) does not come into contact with the beer/wine/AFG, long pipe runs, and long tapping times can be handled effortlessly without the beverage becoming impregnated. Beer pump SHURflo Beer Ace Flow rate 3-10 l/min. Alternatively Wine/AFG pump Flow rate 3-10 litres/min. Only Dry cleaning possible
Sniffer Bluetooth additional KIT The LogiCO2 sniffer (Bluetooth) is a gateway for reading measured values from LofiCO2 and O2 security systems. Information from the sniffer can only be read out (read-only). The measured values are sent via Bluetooth to a smartphone with the LogiCO2 sniffer app installed.
Spare parts for basket tapping head Micro Matic / Hiwi Non-return cone Ball lock Non-return ball Plunger Hexagon nut 3/4“ with recess 14 x 7 mm Lip valve Sight glass for non-return device O-ring for 5/8“ plunger Main seal Handle with logo Pin for Dispensing head handle Seal on Plunger
Spare parts for flat tapping head Micro Matic / Hiwi Non-return cone Ball lock Non-return ball Plunger Hexagon nut 3/4“ with recess 14 x 7 mm Lip valve Sight glass for non-return device O-ring for 5/8“ plunger Main seal Handle with logo Pin for dispensing head handle
Spare parts for Micro Matic / Hiwi combi tapping head Non-return cone Ball lock Non-return ball Plunger Hexagon nut 3/4“ with recess 14 x 7 mm Lip valve Sight glass for non-return device O-ring for 5/8“ plunger Main seal Handle with logo Pin for Dispensing head handle Seal on Plunger
Stopcock for Co2 pressure reducer With the stopcock for Co2 pressure reducer, you can replace a defective stopcock from a Co2 pressure reducer or build a 2-line Co2 pressure reducer from a 1-line Co2 pressure reducer. Please note that the stopcock for the Co2 pressure reducer must be glued in with Euro Lock metal adhesive. Version stopcock for Co2 pressure reducer 1-pipe for CO2/nitrogen pressure reducer and for intermediate pressure regulator 2-pipe for CO2/nitrogen pressure reducer and for intermediate pressure regulator
Beer stopcock straight for screwing on to KEG tapping heads or tap, with fixed spout. Beer stopcock NW 7 mm straight, only available in stainless steel NW 10 mm straight
Three-way ball valve NW 10 mm electrical, with 3 x 5/8" connection thread, with SK mark. Wall bracket with motor, with switch for remote switching. with Push-button switch Push-button switch individually Attention! Transformer 24 Volt, 50 Hz must be provided by the customer and connected in between.
Transition fitting from 5/8 inch to 3/4 inch 5/8 inch female thread to 3/4 inch male thread Attention: Please use a tight-sealing METAL ADHESIVE! You can find the appropriate adhesive HERE
Ultrasonic flow meter for beer and AFG Nominal diameter either NW 7 mm or 10 mm please specify. Consisting of control unit and transducers. Mechanical cleaning possible, free passage through ultrasonic measurement. Simply install the devices, connect, ready, no calibration required. Design: Central unit for 1 to 2 sensors, Central unit for 1 to 10 sensors, For this you need: Transmitters Price per unit/line. Simple method to control your daily dispensing in terms of quantity, so you have your dispensing staff under control. You can configure the flow meter according to your requirements using the "Customised item" field.
USB-Mobus interface for LogiCO2 gas detection system The USB Modbus interface allows you to easily connect your LogiCO2 CO2 safety system to your desktop computer for smooth digital communication with LogiCO2 CO2 sensors. With the supplied shielded cable (3 metres long) and the RJ45 connection, nothing stands in the way of a stable connection. Together with the various LogiCO2 software versions, this USB-MODBUS interface connection even offers you visual indicators with 2 LEDs (Rx and Tx) and supports speeds of up to 1 MB. The USB485-MB45 is a reliable 2-wire RS485 adapter with automatic receive/transmit switching and an RJ45 connection in accordance with Modbus specifications. Thanks to the 2.5 kV isolation barrier, it provides high-quality galvanic isolation between your PC and the remote device. This means that your PC is optimally protected, even if the remote device fails. With its simple installation and operation, the USB Modbus interface adapter is ready for use in no time at all. Simply connect the sensor, install the drivers and use it as usual. Your safety is a top priority, and this practical USB Modbus interface for LogiCO2 gas detection system ensures that.
Wall bracket for keg dispensing head The wall holder for keg dispensing head is a practical and space-saving parking holder for all standard keg dispensing heads. With this wall holder, you can finally find a safe place to store your keg tap head. Advantages: Brewery quality: This wall holder has been manufactured to the highest quality to keep your tap head safe and stable. Affordable: Our affordable price means you get a high-quality solution for storing your KEG tap head. Available for immediate delivery: Order today and receive your wall holder quickly and reliably delivered directly to your doorstep. The wall holder for keg tap head offers you a practical solution for keeping your tap head safe and within easy reach at all times. Create order and save valuable space in your catering establishment or your own home. With this wall holder, you will always have your tap head in the right place.
Wall bracket made of stainless steel, recessed on both sides 14 x 8 mm, with mounting bracket made of CNS. Wall bracket NW 7 mm NW 10 mm
Working pressure gauge for Co2 pressure reducer Working pressure gauge for Co2 pressure reducer Connection 1/4" AG Input at 6 o'clock Selectable version: 0-6/3 bar, 0-10/7bar