Top seller
No results were found for the filter!
Elbow fitting CNS 90° 5/8 inch Elbow fitting CNS 90° 5/8 inch Elbow fitting CNS 90° 5/8 inch for narrow installation conditions, with plastic elbow, complete with 5/8" hex nut and seal. Elbow fitting design: NW 7 mm NW 10 mm ATTENTION: PAY ATTENTION TO STAGGERED...
£2.78
Chrome nickel steel beer cooling coil made of chrome nickel steel NW 10 mm, 11 x 0.5 mm, 7 m long, 20.5 cm high, 14 cm Ø. Beer cooling coil left rotated right rotated
£53.66
Qutesch screw fitting NW 10 for cooling coil Pinch fitting for cooling coil NW 10 consisting of: - CNS double threaded nipple - pinch fitting
£8.94
Pinch fitting consisting of pinch grommet Pinch fitting consisting of pinch grommet pinch bushing for thread G 5/8“. Pinch fitting for hose 7 x 12 mm NW for hose 10 x 16 mm NW
£1.56
Hexagon nut R 5/8" brass nickel plated Beer hex fittings hex nut R 5/8" brass nickel plated ATTENTION: STAFFEL PRICES NOTE!!! (see below)
£1.00
Y-piece for line cleaning Y-piece for line cleaning For simultaneous connection of 3 beer lines in the cellar during line cleaning. 2 x 5/8" male thread, 1 barrel nut 5/8", to be used with double thread nipple or cleaning hose for extension (not included).
£10.29
Wing nut 3/4" brass nickel plated CO2 wing fittings wing nut 3/4“ brass nickel-plated ATTENTION: STAFFEL PRICES BE AWARE!!! (see below)
£1.51
Cleaning adapter with Gardena connection Cleaning adapter with Gardena connection In connection with the Gardena connection with 5/8“ internal thread, you can simply use your water hose with Gardena connection for cleaning
£3.48
Beer hose nozzle 10 mm straight with collar and... Beer hose nozzle 10 mm straight with collar and lug, stainless steel Connection grommet for beer screw connection, inner diameter 10 mm. With this beer connector, the plastic seal is already molded onto the stainless steel. With this...
£1.29
Wing nut 1/2" brass nickel plated Beer wing fittings wing nut 1/2“ brass nickel-plated ATTENTION: STAFFEL PRICES BE AWARE!!! (see below)
£1.20
Leak detector spray OPN Chemi Leak Detector Spray OPN Chemi Leak detector spray for finding leaks in compressed air and gas line systems. Bottle with 400 ml, biodegradable. Bubble formation indicates leak, also finest hairline cracks. Use on all gas and compressed...
Content 0.4 Liter (£11.53 * / 1 Liter)
£4.47
4 mm Co2 hose nozzle straight with collar and... 4 mm Co2 hose nozzle straight with collar and shoulder, nickel-plated brass, tin-plated inside. CO2 grommet straight with collar and lug, nickel-plated brass. Inner diameter NW 2.8 mm ATTENTION: STAFFELPREISES NOTE!!! (see below)
£1.78
Cellar connector for beer line cleaning Cellar connector for beer line cleaning Cellar connector for beer line cleaning threaded 5/8" on both sides with wing handle. Connector for beer line.
£4.37
Wing nut 5/8" brass nickel plated Wing nut 5/8" brass nickel plated Beer wing fittings, wing nut 5/8 inch, nickel-plated brass ATTENTION: PAY ATTENTION TO STAGGERED PRICES!!!
£1.20
Plastic Y-connector Norma Group Plastic Y-connector from 1 to 2 lines Plastic Y-connector Hose connector NW Nominal diameter (inner diameter) NW 4 mm POM NW 8 mm POM NW 10 mm POM
£0.88
Oetiker 1-Ear Clamps Stainless Steel Version... 1-Ear Clamps Stainless Steel Design with Stainless Steel Bearing Ring At a glance: • Quick, easy and safe assembly • Specially shaped band edges reduce the risk of damage to the material to be clamped • Tying control...
£0.86
Cooling and calming coil for beer made of CNS Cooling and calming coil for beer made of CNS Cooling and calming coil made of CNS NW 7 mm, complete with wall mounting. Dimension: 10/10 cm angular, 7 m long Pressure reduction approx. 0.1 bar/m coil = 0.7 bar
£41.08
Transition fitting 5/8" IT, 3/4" ET Transition fitting 5/8“ IT, 3/4“ ET Attention: Please GLUE IN WITH TIGHT SEALING METAL ADHESIVE ! See adhesive
£1.35
10 mm beer hose nozzle bent stainless steel 10 mm beer hose nozzle bent stainless steel Beer hose nozzle bent NW 10 mm with collar and neck, made of stainless steel self-sealing ATTENTION: STAFFELPREISEN!!!
£2.01
Crimp fitting for steel pipe 8 x 0.5 mm Pinch fitting for steel tube 8 x 0.5 mm (e.g. for 7 mm cooling coils) with hose nozzle for beer hose NW 7 mm Alternative: Double compression fitting with on both sides Pinch fitting for steel pipe 8 x 0.5 mm
£2.05
Reducer from 1/4 inch to 5/8 inch or 3/4 inch Reducer from 1/4 inch to 5/8 inch or 3/4 inch Reducer from 1/4 inch to 5/8 inch or 3/4 inch nickel plated brass. Usable for Co2 wall manifold or Co2 pressure reducer repair. Available styles Reducer from 1/4 in. to: 1/4" male thread to...
£3.57
Worm Drive Clamps Bandwidth 9 mm Worm drive clamps stainless steel Bandwidth 9 mm, for hoses: 10 - 16 mm, for 7 mm hoses 12 -22 mm, for 10 mm hoses
£0.84
EURO LOCK metal adhesive screw lock EURO LOCK Metal Adhesive Screw Lock EURO LOCK metal adhesive screw lock , fast curing, high strength. For securing and fastening screws, nuts, stud bolts in case of vibration and impact. Thread up to M 20
Content 0.05 Liter (£276.60 * / 1 Liter)
£13.42