Beverage dispensers & beer coolers in professional quality
Dispensing systems for various beverages
Beverage dispensers are some of the most important equipment in professional catering. After all, they ensure that drinks are kept at the perfect temperature and that the beer is perfectly fresh on tap. Our beer coolers transport your beer safely and perfectly chilled from the keg to the tap. The table water units are ideal for reception areas, offices or fitness centres. With the wine coolers and the mulled wine device, you can offer your guests a perfectly tempered drink without any effort.
Mulled wine dispenser, mulled wine device, mulled wine heater VA with 3 x tap, 3KW Beverage heater (mulled wine dispenser) made of stainless steel, 3-pipe, power consumption: 3 kW/h with integrated electric pump. equipped with stainless steel tap. Compact, powerful, reliable Dimensions: Width 25cm, depth 35cm, height 34cm Dispensing capacity 35 l/h with a temperature difference of 75°C between inlet and outlet temperature. Temperature control from 7°C to 85°C possible. The appliance is equipped with an integrated self-priming, low-noise electric pump. This pump enables dispensing from non-pressurised containers (e.g. canisters). Equipment: 3 heated taps 3 beverage hoses with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 cleaning manual Dispensing capacity: 175 x 0.2 I/h Beverage temperature: adjustable up to max: 85° C Mains connection: 230V / 50 Hz Power consumption: 13 A Fuse: 16 A Weight: 28 kg.
Mulled wine dispenser, mulled wine device, mulled wine heater VA with 3 x tap, 9 KW Beverage flow heater (mulled wine dispenser) in stainless steel, 3-pipe, power consumption: 9 kW/h with electric pumps. Dispensing capacity 100 l/h with a temperature difference of 75°C between inlet and outlet temperature. Infinitely variable temperature control from 7°C to 85°C possible. The appliance is equipped with integrated self-priming, low-noise electric pumps. The pumps enable dispensing from non-pressurised containers (e.g. canisters). Equipment: 3 heated taps 3 beverage hoses with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 cleaning manual Dispensing capacity: 500 x 0.2 I/h Beverage temperature: adjustable up to max: 85° C Mains connection: 400 V / 50 Hz Current consumption: 16 A Fuse: 3 x 16 A slow-blow Weight: 28 kg.
Mulled wine dispenser, mulled wine appliance, mulled wine heater with 1 x tap, 9KW Instant beverage heater (mulled wine dispenser) in barrel form, 1-pipe Power consumption: 9 kW/h with electric pump. Dispensing capacity 100 l/h with a temperature difference of 75°C between inlet and outlet temperature. Infinitely variable temperature control from 7°C to 85°C possible. The appliance is equipped with an integrated self-priming, low-noise electric pump. This pump enables dispensing from non-pressurised containers (e.g. canisters). Equipment: heated tap 1 beverage hose with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 set of cleaning instructions Dispensing capacity: 500 x 0.2 I/h Beverage temperature: adjustable up to max: 85° C Mains connection: 400 V / 50 Hz Current consumption: 16 A Fuse: 16 A slow-blow Weight: 28 kg.
Mulled wine dispenser, mulled wine device, mulled wine heater with 2 x tap, 3KW Instant beverage heater (mulled wine dispenser) in barrel form, 2-pipe power consumption: 3 kW/h with electric pump. Dispensing capacity 35 l/h with a temperature difference of 75°C between inlet and outlet temperature. Infinitely variable temperature control from 7°C to 85°C possible. The appliance is equipped with integrated self-priming, low-noise electric pumps. The pumps enable dispensing from non-pressurised containers (e.g. canisters). Equipment: 2 heated taps 2 beverage hoses with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 cleaning manual Dispensing capacity: 175 x 0.2 I/h Beverage temperature: adjustable up to 85° C Mains connection: 230V / 50 Hz Power consumption: 13 A Fuse: 16 A Weight: 28 kg.
Mulled wine dispenser, mulled wine device, mulled wine heater with 2 x tap, 9KW Instant beverage heater (mulled wine dispenser) in barrel form, 2-pipe, power consumption: 9 kW/h with electric pump. Dispensing capacity 100 l/h with a temperature difference of 75°C between inlet and outlet temperature. Infinitely variable temperature control from 7°C to 85°C possible. The appliance is equipped with an integrated self-priming, low-noise electric pump. This pump enables dispensing from non-pressurised containers (e.g. canisters). Equipment: 2 heated taps 2 beverage hoses with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 cleaning manual Dispensing capacity: 500 x 0.2 I/h Beverage temperature: adjustable up to max: 85° C Mains connection: 400 V / 50 Hz Current consumption: 16 A Fuse: 16 A slow-blow Weight: 28 kg.
Mulled wine dispenser, mulled wine device, mulled wine heater with 2 x tap, 9 KW Beverage heater, 2-pipe in stainless steel with integrated air compressor for tapping from KEG barrels, Power consumption: 9 kW/h with stainless steel taps Dispensing capacity 100 l/h with a temperature difference of 75°C between inlet and outlet temperature. Temperature control from 7°C to 85°C possible. The appliance is equipped with an integrated low-noise electric air compressor. This compressor enables tapping from pressurised containers. The filtered compressed air from the compressor is used to force the beverage out of the container. Equipment: 2 heated taps 2 beverage hoses with screw connections 1 air line, 2-way, with screw connections 1 drip tray 1 operating manual 1 cleaning manual Dispensing capacity: 500 x 0.2 I/h Beverage temperature: adjustable up to max: 85° C Mains connection: 400 V / 50 Hz Power consumption: 16 A Fuse: 16 A Weight: 28 kg.
Mulled wine dispenser, mulled wine device, mulled wine heater with 3 x tap, 3KW Instant beverage heater (mulled wine dispenser) in barrel form, 3-pipe power consumption: 3 kW/h with electric pumps. Dispensing capacity 35 l/h with a temperature difference of 75°C between inlet and outlet temperature. Infinitely variable temperature control from 7°C to 85°C possible. The appliance is equipped with integrated self-priming, low-noise electric pumps. The pumps enable dispensing from non-pressurised containers (e.g. canisters). Equipment: 3 heated taps 3 beverage hoses with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 cleaning manual Dispensing capacity: 175 x 0.2 I/h Beverage temperature: adjustable up to 85° C Mains connection: 230V / 50 Hz Power consumption: 13 A Fuse: 16 A Weight: 28 kg.
Mulled wine dispenser, mulled wine device, mulled wine heater with 3 x tap, 9KW Instant beverage heater (mulled wine dispenser) in barrel form, 3-pipe, power consumption: 9 kW/h with electric pumps. Dispensing capacity 100 l/h with a temperature difference of 75°C between inlet and outlet temperature. Infinitely variable temperature control from 7°C to 85°C possible. The appliance is equipped with integrated self-priming, low-noise electric pumps. The pumps enable dispensing from non-pressurised containers (e.g. canisters). Equipment: 3 heated taps 3 beverage hoses with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 cleaning manual Dispensing capacity: 500 x 0.2 I/h Beverage temperature: adjustable up to max: 85° C Mains connection: 400 V / 50 Hz Current consumption: 16 A Fuse: 3 x 16 A slow-blow Weight: 28 kg.
Mulled wine heater Mulled wine appliance Hot keg for easy tapping of mulled wine, punch, children's punch, Jagertee, grog, Julischka Temperature setting infinitely variable 35° C to 85° C adjustable. Ready to plug in, ready to tap in 10 minutes. With drip tray, heated taps. Device with electric pumps=simple installation, preset dispensing speed. Dimensions: W/D/H 308/580/445 mm Weight: 32 kg Dispensing capacity: 100 l/h 8.400 W, 400 V, 50 Hz, 12.5 A Hot water tank With integrated electric pump 2-ltg.
Mulled wine heater Mulled wine appliance Hot keg for easy tapping of mulled wine, punch, children's punch, Jagertee, grog, Julischka Temperature setting infinitely variable 35° C to 85° C adjustable. Ready to plug in, ready to tap in 10 minutes. With drip tray, heated taps. Appliance with compressed air-driven pumps, here the pumps can be operated using either a compressed air compressor N2 or CO2. With these appliances, the dispensing speed can be variably adjusted. Dimensions: W/D/H 308/580/445 mm Weight: 32 kg Dispensing capacity: 100 l/h 8.400 W, 400 V, 50 Hz, 12.5 A Hot tank With integrated compressed air pump 2-ltg.
Mulled wine heater Mulled wine appliance for easy tapping of mulled wine, punch, children's punch, Jagertee, grog, Julischka, mulled beer Temperature setting infinitely variable 35° C to 85° C adjustable. Ready to plug in, ready to dispense in 10 minutes. With drip tray 520 mm deep, heated taps. Device without pumps for dispensing kegs, CO2 / N2 pressure reducer required. Dimensions: W/D/H 295/520/465 mm Weight: 35 kg Dispensing capacity: 100 l/h 400 V, 50 Hz, 8,400 W, 12.5 A Mulled wine device complete without pump 3-ltg
Mulled wine heater Mulled wine dispenser with electric pump Mulled wine dispenser with electric pump for easy dispensing of mulled wine, punch, children's punch, Jagertee, Grog, Julischka. Temperature setting continuously adjustable from 35° C to 85° C. Ready to plug in, ready to tap in 10 minutes. With 520 mm deep drip tray and heated taps. Appliance with electric pumps=simple installation, preset dispensing speed. See connection diagram! Function of the mulled wine dispenser with electric pump A self-priming electric pump is installed in the mulled wine heater. The mulled wine is sucked out of the containers via the electric pump using the supplied hose + suction pipes. The mulled wine is only heated in the mulled wine dispenser during the tapping process and is then tapped hot into the mulled wine cup. This ensures that the mulled wine retains its full flavour and alcohol content. Dimensions: W/D/H 295/520/465 mm Weight: 40 kg Dispensing capacity: 100 l/h Optionally with 2 or 3 taps (please select via selection window) 400 V, 50 Hz, 8,400 W, 12.5 A Mulled wine device With integrated electric pump
Mulled wine heater Mulled wine device with compressed air pump Mulled wine dispenser for easy dispensing of mulled wine, punch, children's punch, Jagertee, Grog, Julischka Temperature setting infinitely variable 35° C to 85° C adjustable. Ready to plug in, ready to dispense in 10 minutes. With drip tray 520 mm deep, heated taps. Appliance with compressed air-driven pumps, here the pumps can be operated using either an air compressor N2 or CO2. With these appliances, the dispensing speed can be variably adjusted. Dimensions: W/D/H 295/520/465 mm Weight: 40 kg Dispensing capacity: 100 l/h 400 V, 50 Hz, 8,400 W, 12.5 A Mulled wine device With integrated compressed air pump
Premium beverage dispensing system set 1 pipe, 7 mm beer pipe With this dispensing system set, we offer you the opportunity to overhaul your dispensing system or to replace all relevant parts of the dispensing system. The dispensing head, Co2 pressure reducer and the stainless steel compensator tap are from the premium manufacturer Micro Matic. The dispensing system set consists of: 1 x beer hose NW 7 mm, length: 1.5 m, complete with 5/8" wing screw connection 1 x straight and 1 x 90° spout made of CNS 1 x CO2 hose NW 4 mm, length: 1.5 m, complete with 3/4" wing screw connection 2 x straight spout 1 x dispensing head, Micro Matic, for cellar tapping (please select the appropriate dispensing head from the selection menu) 1 x compensator tap, Micro Matic, polished stainless steel - 35 mm spigot 1 x CO2 pressure reducer, Micro Matic, 1-pipe, 3 bar 1 x carbon dioxide spanner Tap spanner
Beverage dispensing system premium set 2 conductors, 7 mm beer line With this dispensing system set, we offer you the opportunity to overhaul your dispensing system or to replace all relevant parts of the dispensing system. The dispensing heads, the Co2 pressure reducer and the stainless steel compensator taps are from the premium manufacturer Micro Matic. The dispensing system set consists of: 2 x beer hose NW 7 mm, length: 1.5 m, complete with 5/8" wing screw connection 1 x straight and 1 x 90° spout made of CNS 2 x CO2 hose NW 4 mm, length: 1.5 m, complete with 3/4" wing screw connection 2 x straight spout 2 x dispensing head, Micro Matic, for cellar tapping (please select the appropriate dispensing head from the selection menu) 2 x Micro Matic compensator tap, polished stainless steel - 35 mm spigot 1 x Micro Matic CO2 pressure reducer, 1-pipe, 3 bar 1 x carbon dioxide spanner Tap spanner
Pump for mulled wine dispenser Flojet T5000130 Flojet pump T5000130 is suitable for fruit juice concentrates (without fruit pulp), tea, wine and other alcoholic beverages. Vacuum switch switches off automatically when box is empty. Suitable for operation with air, nitrogen and CO2 and can be regulated via gas/air supply. With quick-release fasteners. Designed for pumping up to 75,000 litres Mulled wine dispenser with compressed air pump with compressed air pump. Pump: Compressed air double diaphragm pump Output up to 7.6 litres / min. Inlet pressure max 0.7 bar Delivery pressure up to 5.5 bar Compressed air max 5.5 bar Temperature +1 °C to -49 °C Materials Polypropylene, Santoprene®, EPDM, stainless steel Approval NSF, FDA, CE, SK 290-001 Dry self-priming up to 4.5 m.
Pump for tapping beer without Co2 5/8“ for screwing onto a keg dispense head. Full metal design. Consisting of: Pump for beer dispensing Piston tap Hose with screw connection (Delivery WITHOUT KEG tap head) - For tap heads, please select the chapter Tapping fittings
Python heat exchanger BK 130 Maxi water bath cooling (4/5 hp) Accompanying unit for water bath cooling (4/5 HP). With agitator motor pump, thermostat control, water level indicator and water supply and return G 5/8 Electrical connection values: 230 V / 50 Hz / 4.7 A / 900 W Cooling capacity: 1511 W / 1300 kcal/h Water bath: 48 litres W/D/H: 750/400/550 mm Weight: 51 kg
Python heat exchanger BK 130 Maxi water bath cooling (4/5 hp) Accompanying unit for water bath cooling (4/5 HP). With agitator motor pump, thermostat control, water level indicator, analogue temperature display and water supply and return G 5/8 Electrical connection values: 230 V / 50 Hz / 4.7 A / 900 W Cooling capacity: 1511 W / 1300 kcal/h Water bath: 48 litres W/D/H: 750/400/550 mm Weight: 51 kg
Python heat exchanger BK 70 Medi A water bath cooling (3/8 hp) Trace unit for water bath cooling (3/8 hp). With agitator motor pump, thermostat control, water level indicator, analogue temperature display and water supply and return G 5/8 Electrical connection values: 230 V / 50 Hz / 2.6 A / 420 W Cooling capacity: 814 W / 700 kcal/h Water bath: 27 litres W/D/H: 700/370/495 mm Weight: 40 kg
Python heat exchangerBK 90 Medi A water bath cooling (2/3 PS) Trace unit for water bath cooling (2/3 hp). With agitator motor pump, thermostat control, water level indicator, analogue temperature display and water supply and return G 5/8 Electrical connection values: 230 V / 50 Hz / 3.7 A / 650 W Cooling capacity: 1105 W / 950 kcal/h Water bath: 27 litres W/D/H: 700/370/495 mm Weight: 40 kg
Python BK 90 Medi water bath cooler (2/3 PS) Trace unit for water bath cooling (2/3 hp). With agitator motor pump, thermostat control, water level indicator and water supply and return G 5/8 Electrical connection values: 230 V / 50 Hz / 3.7 A / 650 W Cooling capacity: 1105 W / 950 kcal/h Water bath: 27 litres W/D/H: 700/370/495 mm Weight: 40 kg
Python heat exchanger BK 70 Medi water bath cooling (3/8 hp) Trace unit for water bath cooling (3/8 hp). With agitator motor pump, thermostat control, water level indicator and water supply and return G 5/8 Electrical connection values: 230 V / 50 Hz / 2.6 A / 420 W Cooling capacity: 814 W / 700 kcal/h Water bath: 27 litres W/D/H: 700/370/495 mm Weight: 40 kg