Beverage dispensers & beer coolers in professional quality
Dispensing systems for various beverages
Beverage dispensers are some of the most important equipment in professional catering. After all, they ensure that drinks are kept at the perfect temperature and that the beer is perfectly fresh on tap. Our beer coolers transport your beer safely and perfectly chilled from the keg to the tap. The table water units are ideal for reception areas, offices or fitness centres. With the wine coolers and the mulled wine device, you can offer your guests a perfectly tempered drink without any effort.
Diaphragm pump Blusoda 30 and 45, Box 30 and 60
Beer dry blocks up to 1,000 kcal/h 2 ltg. (1,160 W at -5° C VT) complete with control system R134a (expansion valve, solenoid valve, thermostat). Required compressor cooling capacity: 950 W at -10° C evaporation. Please specify the desired nominal width 7 mm or 10 mm! Dimensions: W/D/H 350/420/175 mm Weight: 19 to 23 kg
Dry cooling blocks for after-cooling, for counter installation, for connection to central cooling system 4 ltg. Beer dry blocks up to 1,000 kcal/h (1,160 W at -5° C VT) complete with control R134a (expansion valve, solenoid valve, thermostat). Required compressor cooling capacity: 950 W at -10° C evaporation. Please specify the desired nominal width 7 mm or 10 mm! Dimensions: W/D/H 350/420/175 mm Weight: 19 to 23 kg
Dry cooling blocks for after-cooling, for counter installation, for connection to central cooling system 5 ltg. Beer dry blocks up to 1,000 kcal/h (1,160 W at -5° C VT) complete with control R134a (expansion valve, solenoid valve, thermostat). Required compressor cooling capacity: 950 W at -10° C evaporation. Please specify the desired nominal width 7 mm or 10 mm! Dimensions: W/D/H 350/420/175 mm Weight: 19 to 23 kg
Dry cooler "Craft-Beer" 1-pipe, 18 litres/h Delivery incl. drip tray, without tap. Continuous tap capacity: 18 litres/h at 10° C TD Pipe diameter: NW 7 mm Line: 1 x beer Cooling capacity: 265 W / 920 kJ/h (220 kcal) Voltage: 230 V / 50 Hz, 220 W, 1.3 A Comperessor: 1/6 PS Housing material: Stainless steel Dimensions W/D/H: 264/186/420 mm (D with drip tray 360 mm) Weight: 19 kg Delivery without tap Can be used with all taps from 35 mm threaded connection
EKW Disinfect for water taps EKW Desinfect concentrate 1000 ml container EKW Desinfect cleaning and disinfecting agent based on ECA solution. Concentrate, mixing ratio 1:10 with water for system cleaning and disinfection of water dispensers, coffee machines, syrup supply systems and cooling circuit carbonators. Safely removes biofilms, pseudomonads and other water-damaging organisms. To be used as a bactericidal, virucidal, fungicidal and sporicidal disinfectant, classification according to EC regulation 1272/2008 (CLP). This product is classified as non-hazardous. Effectiveness tested according to DIN EN 1656:2009, DIN EN 13697:2001. Product complies with ECHA Article 95 "Regulation on Biocidal Products". Baua-No: N-71041 CAS-No: 7681-52-9 Use biocidal products with care. Always read the label and product information before use.
EKW test strips for water taps EKW test strips 100 pieces / can
Contents: 100 Stück (£0.53 / 1 Stück)
Everpure filter cartridge for hot drinks type BH2 Capacity for approx. 11 300 liters Dimensions in mm Ø x H: 80 x 370 Flow rate: 1,9 l/min. (approx. 170 cups per day or 30 liters) Filtration: up to 0,5 µm Contains MicroPure II with AgION - TechnologyThis filter series was developed to provide premium water quality for hot beverage machines, coffee machines, as well as for small ice machines, as these are particularly susceptible to scale build-up.These filters also work according to the precoat filter process.A hardness stabilizer is added to the water. In this way, theEverpure filter reduces the level of precipitation of minerals in order to reduce limescale.By adding a hardness stabilizer, the tendency to form larger formations of mineral crystals is counteracted.In addition, these cartridges contain our MICRO-Pure II filter medium in silvered form. This has a germicidal or -reducing effect.
Everpure water filter head exclusive for Everpure cartridges Everpure filter head QL3BBFilter head with solid, durable construction, food grade. All water-bearing parts meet NSF specifications for durability, corrosion & longevity.
Flojet pump T5000130 for bag in box Flojet pump T5000130 is suitable for fruit juice concentrates (without fruit pulp), tea, wine, other alcoholic beverages. Vacuum switch switches off automatically when box is empty. Suitable for operation with air, nitrogen and CO2 and can be regulated via gas/air supply. With quick-release fasteners. Designed for pumping up to 75,000 litres Mulled wine dispenser with compressed air pump with compressed air pump. Pump: Compressed air double diaphragm pump Output up to 7.6 litres / min. Inlet pressure max 0.7 bar Delivery pressure up to 5.5 bar Compressed air max 5.5 bar Temperature +1 °C to -49 °C Materials Polypropylene, Santoprene®, EPDM, stainless steel Approval NSF, FDA, CE, SK 290-001 Dry self-priming up to 4.5 m.
Guinness tapping system 30 litres/h complete set Guinness tapping Delivery incl. drip tray, Guinness tap, beer pipe, stainless steel housing in "polished sheet metal" design. Unpack and get started straight away - including pressure reducer and filled nitrogen bottle! The Guinness tap with its Creampalte (foam disc) ensures the typical Guinness foam crown on the beer! Continuous dispensing capacity: 30 litres/hour at 10° C TD Pipe diameter: NW 7 mm Line: 1 x beer Voltage: 230 V, 50 Hz, 267 W, 1.16 A Compressor: 1/8 hp Guinness tap with Creampalte (foam disc for the typical Guinness foam head) Nitrogen bottle filled Nitrogen pressure reducer Guinness tap head - alternatively plug-in couplings Beer & nitrogen pipe Dimensions: Dimensions: W/D/H 167/281 (incl. drip tray)/ 368 mm Weight: 14.5 kg IDEAL FOR AT HOME! Price only while stocks last!
Level control Blusoda 30 and 45, Box 30, 60 and 80
Micro Matic CO2 pressure regulator AFG 7 bar Type Premium Micro-Matic, 7 bar with integrated safety valve with stopcock without spout and nut. With content indicator. On request with: wall plate + adapter for attaching the pressure reducer to the wall
Mobile event bar with continuous cooling The mobile beer bar has two cooling circuits that can be controlled independently of each other. You can control the integrated continuous cooler and the room cooling separately using the cooling controller. The temperature can be set from 2 to 6 degrees Celsius. Beer bar with conveyor cooler The mobile event cooler has a continuous flow cooler with a dispensing capacity of 60 litres per hour. Even with non-pre-chilled beer, the beer bar is ready for use within 5 - 10 minutes. Mobile beer bar on castors The mobile event bar has four heavy-duty castors and can therefore be easily moved from location to location. The castors have a parking brake. Mobile beer serving point With the mobile beer bar, you have a flexible beer serving point in your catering area, ideal for beer gardens or event locations. Technical data mobile beer bar: Material: black plastic-coated sheet metal exterior, silver interior, stainless steel base Cover: stainless steel with all-round beaded edge Insulation: 40 mm Dimensions: Outside: W650 x D700 x H1030 mm - Inside: 550 x 590 x 640 mm Weight: 80 kg Cooling capacity: 504W 1800Kj/h Power: 230 Volt/50Hz. Ready-to-use mobile beer bar We are also happy to offer you the beer bar ready for use. The design then includes the following equipment: Beer dispenser with tap Co2 pressure reducer KEG dispensing head Co2 bottle Beer & Co2 pipe Stainless steel drip tray
Mulled wine over-the-counter dispenser with drip tray and ball tap Continuous dispensing capacity: 100 l/h Dimensions W/D/H: 290/520/384 mm (D incl. drip tray) Weight: 28 kg with integrated electric pump 2 litres per hour
Mulled wine over-the-counter dispenser with drip tray and ball taps Continuous dispensing capacity: 40 litres per hour at Dt=60 °C Temperature setting: 40 °C to 70 °C Cable: 2 Voltage: 230 V / 50 Hz, 3,000 W, 13 A Material Housing: Stainless steel Dimensions W/D/H: 260/372/394 mm (D with drip tray 472 mm) Weight: 19 kg with integrated electric pump 2 litres
Mulled wine dispenser, mulled wine device, mulled wine heater VA with 1 x tap, 3KW Beverage heater (mulled wine dispenser) made of stainless steel, 1-pipe, power consumption: 3 kW/h with integrated electric pump. equipped with stainless steel tap. Compact, powerful, reliable Dimensions: Width 25cm, depth 35cm, height 34cm Dispensing capacity 35 l/h with a temperature difference of 75°C between inlet and outlet temperature. Temperature control from 7°C to 85°C possible. The appliance is equipped with an integrated self-priming, low-noise electric pump. This pump enables dispensing from non-pressurised containers (e.g. canisters). Equipment: 1 heated tap 1 beverage hose with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 set of cleaning instructions Dispensing capacity: 175 x 0.2 I/h Beverage temperature: adjustable up to max: 85° C Mains connection: 230V / 50 Hz Power consumption: 13 A Fuse: 16 A Weight: 28 kg.
Mulled wine dispenser, mulled wine device, mulled wine heater VA with 1 x tap, 3KW Beverage heater (mulled wine dispenser) made of stainless steel, 1-pipe, power consumption: 3 kW/h with integrated electric pump. equipped with stainless steel tap. Compact, powerful, reliable Dimensions: Width 25cm, depth 35cm, height 34cm Dispensing capacity 35 l/h with a temperature difference of 75°C between inlet and outlet temperature. Temperature control from 7°C to 85°C possible. The appliance is equipped with an integrated self-priming, low-noise electric pump. This pump enables dispensing from non-pressurised containers (e.g. canisters). Equipment: 1 heated tap 1 beverage hose with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 set of cleaning instructions Dispensing capacity: 175 x 0.2 I/h Beverage temperature: adjustable up to max: 85° C Mains connection: 230V / 50 Hz Power consumption: 13 A Fuse: 16 A Weight: 28 kg.
Mulled wine dispenser, mulled wine device, mulled wine heater VA with 1 x tap, 9 KW Beverage flow heater (mulled wine dispenser) in stainless steel, 1-pipe Power consumption: 9 kW/h with electric pump. Dispensing capacity 100 l/h with a temperature difference of 75°C between inlet and outlet temperature. Infinitely variable temperature control from 7°C to 85°C possible. The appliance is equipped with an integrated self-priming, low-noise electric pump. This pump enables dispensing from non-pressurised containers (e.g. canisters). Equipment: heated tap 1 beverage hose with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 set of cleaning instructions Dispensing capacity: 500 x 0.2 I/h Beverage temperature: adjustable up to max: 85° C Mains connection: 400 V / 50 Hz Current consumption: 16 A Fuse: 16 A slow-blow Weight: 28 kg.
Mulled wine dispenser, mulled wine device, mulled wine heater VA with 2 x tap, 3KW Beverage heater (mulled wine dispenser) made of stainless steel, 2-pipe, power consumption: 3 kW/h with integrated electric pump. equipped with stainless steel tap. Compact, powerful, reliable Dimensions: Width 25cm, depth 35cm, height 34cm Dispensing capacity 35 l/h with a temperature difference of 75°C between inlet and outlet temperature. Temperature control from 7°C to 85°C possible. The appliance is equipped with an integrated self-priming, low-noise electric pump. This pump enables dispensing from non-pressurised containers (e.g. canisters). Equipment: 2 heated taps 2 beverage hoses with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 cleaning manual Dispensing capacity: 175 x 0.2 I/h Beverage temperature: adjustable up to max: 85° C Mains connection: 230V / 50 Hz Power consumption: 13 A Fuse: 16 A Weight: 28 kg.
Mulled wine dispenser, mulled wine device, mulled wine heater VA with 2 x tap, 9 KW Beverage flow heater (mulled wine dispenser) in stainless steel, 2-pipe, power consumption: 9 kW/h with electric pump. Dispensing capacity 100 l/h with a temperature difference of 75°C between inlet and outlet temperature. Infinitely variable temperature control from 7°C to 85°C possible. The appliance is equipped with an integrated self-priming, low-noise electric pump. This pump enables dispensing from non-pressurised containers (e.g. canisters). Equipment: 2 heated taps 2 beverage hoses with screw connection, riser pipe and filter 1 drip tray 1 operating manual 1 cleaning manual Dispensing capacity: 500 x 0.2 I/h Beverage temperature: adjustable up to max: 85° C Mains connection: 400 V / 50 Hz Current consumption: 16 A Fuse: 2 x 16 A slow-blow Weight: 28 kg.