Beer cooler tapping systems Cooling unit repair

Crimping pliers for pipes with a diameter of up to 12 mm (1/2“)

Bottle connection adapter for refrigerant bottles • High-quality brass • With filling connection • Seal • 1/4 inch SAE M

Danfoss Secop compressor R134a High and medium pressure -25°C / +10°C Static ventilation, injection capillary tube/expansion valve 220-240 V / 50Hz Compressor Danfoss TL4G Displacement 3.86 cm3 Cooling capacity at -10°C approx. 140 W Compressor Danfoss FR7,5G Displacement 6.93 cm3 Cooling capacity at -10°C approx. 254 W Danfoss FR8.5G compressor Displacement 7.95 cm3 Cooling capacity at -10°C approx. 298 W Compressor Danfoss FR10G Displacement 9.05 cm3 Cooling capacity at -10°C approx. 324 W Danfoss SC12G compressor Displacement 12.87 cm3 Cooling capacity at -10°C approx. 464 W Danfoss SC15G compressor Displacement 15.28 cm3 Cooling capacity at -10°C approx. 568 W Danfoss SC18G compressor Displacement 17.69 cm3 Cooling capacity at -10°C approx. 684 W Danfoss SC21G compressor Displacement 20.95 cm3 Cooling capacity at -10°C approx. 792 W Danfoss GS34MFX compressor Displacement 33.8 cm3 Cooling capacity at -10°C approx. 1,648 W

Dixell Universal digital controller UNIV - 4 R Features of the Dixel Universa digital regulator UNIV -4 R Dixell presents the new versatile Universal-R4, the controller with two power supplies. The UNIVERSAL-R4 replaces the majority of cooling and heating controllers (over 150 models) in a standard 32 x 74 mm housing in the most common applications. The UNIVERSAL-R4 offers a convenient, versatile and quick-to-install solution: suitable for both 12 V AC/DC and 230 V AC. Many functions characterise this device as the optimal solution for many typical applications. The controller can be used for double evaporator defrosting. Two evaporator sensors and a specific parameter enable the specification of two defrost ends. The UNIVERSAL-R4 is ready for use in three simple steps: 7 different parameter presets - selectable via the parameter tc - cover most of the main applications. The 6 buttons on the front panel allow direct access to the main functions, while the display gives the user information for alarms and working status in real time. The controller can be programmed using a HOTKEY. Energy-saving measures are becoming increasingly important these days: For this reason, this controller is equipped with complete compressor management. By monitoring the compressor temperature during operation, it is possible to recognise when maintenance of the compressor is necessary to maintain the best energy efficiency. The compressor can be switched off if the compressor temperature rises. This prevents technical faults or impairment of the application. Functions- dual voltage 12 V AC/DC and 230 V AC - low voltage (12 V AC/DC) and mains voltage (230 V AC), selectable at the connection terminals- quick and easy commissioning - direct selection of the various functions at the touch of a button- new front in CX design - display with various icons such as status messages and alarm. 6 buttons for programming and operating the device.- Function for second evaporator possible - the fourth relay (AUX) and the sensor Pb3 can be realised for the use of a second evaporator. These can be set independently via the parameters.- On/off button available for the on/off function (standby)n. Front protection: IP65 Operating temperature: 0 ... +60°C Humidity in the operating environment: 20 ... 85% RH (non-condensing) Display: three digits, red LED, height 14.2 Inputs: 1 or 2 sensors PTC / NTC.configurable Relay:.configurable Compressor: normally open contact 8(3)A, 250V Defroster: NO contact 8(3)A, 250V Fan: normally open contact 8(3)A, 250V˜ Alarm or auxiliary relay: normally open contact 8(3)A, 250V Additional output: acoustic alarm TTL output: serial connection for XJ500 and hot key Data storage: non-volatile memory (EEPROM) Measuring range: PTC sensor: -50°C to 150°C NTC sensor: From -50°C to 110°C Resolution: 0.1°C Dimensions W/H/D: 74 x 32 x 70 mm Cut-out W/H: 71 x 26 mm Order transformer and sensor separately! What is the Dixel Universa digital controller UNIV -4 R used for? The Universal-R can directly replace the following controllers and also many others which are not listed. Who in the field/emergency service knows the problem „of not having the correct“ regulator in the vehicle. Service application - Models and sensor types LAE: MTR11/T1RDS, MTR11/T1RES, SDU11/T1RES, SDU11/T1REBS, SDU112, MCDU11/T1RDS/1, MCDU11/T1RDS/2, MCDU11/T1RDS/3, CDC112/T1R2S, CDC112/T1RES, CDC112/T1RBS, SDU12/TORES, SDU12/TOREB, SDU12/TORD, SDU12TORDC, LDU151E, LDU152E, CDC112/T1R2, CDC112/T1R3B Carel: IR32S, IR32Y, IR32C, CR32S, CR32T, CR32X, CR32Y, PJ32S, PJ32X, PJ32C Eliwell EWPC901, EWPC902, EWPC961, EWPC970, EWPC971, EWPC974, EWPX977A, EWTC101, EWPX161, EWPX161AR, EWPX170, EWPX171, EWPX174, EWPX174AR, EWPX117A, EWPX185 (without real time), IC901, IC902, ID961, ID961LX, ID970, ID970LX, ID971, ID971LX, ID974, ID974LX SAE RT31, RC31, RC31-1000, RC31-0100, RC32-0000, RC33, DC31 (PTC) Intek RK31, RK32, RK33, TK31, DK31 (PTC) Every EC3-120, EC3-130, EC3-131, EC3-110, EC3-111, EC3-180, EC3-181, EC3-185, FK200A, FK201A, FK201T, FK202A, FK202T, FK203B, FK203C, FK203T, FK214A Dixell XR110C*, XR120C*, XR130C*, XR140C*, XR150C*, XR160C*, XR170C*, XR10C, XR20C, XR30C, XR40C, XR50C, XR60C, XR70C, *not RS485 version TeddingtoneK-R31, EK-R32, EK-R33 Danfoss EKC201-084B7005, EKC201-084B7008, EKC201-084B7011, EKC201-084B7012, EKC201-084B7006, EKC201-084B7007, EKC201-084B7009, EKC201-084B7010 Penn MR1PM12R-1C, MR1PM230R-1C, MR2PM12R-1C, MR3PM12R-2C, MR4PM12R-2C Beta RD31, RT31, BL21, RC31, BL32, RC32, BL33, RC33

ebm papst agitator motor type iQ3612-310250 energy-saving motor ebm papst agitator motor type iQ3612-310250 energy-saving motor Reduction of power consumption by up to 70% complete with plug and blade Technical data ebmpapst agitator motor: Power consumption 21 W Shaft height: 180 mm Total height: 255 mm 230V, 50Hz, 0.2A, 7W, 1,300 UmP Further EBM PAPST products

ebm papst fan Aci 4420 H i-maxx axial fan energy-saving, 119 x 119 x 38 mm MAX 180m3/h Special features: Energy-efficient AC fan with EC technology. Fully integrated converter and fan electronics. Significantly lower power consumption than conventional AC fans. Significantly quieter than existing AC fans. Significantly longer service life than existing AC fans. Fan speed independent of the mains frequency General properties:Material: Glass fibre reinforced plastic, Fan wheel PA, housing PBT. Electronic blocking protection. Technical description Volume flow m3/h: 160 Volume flow CFM: 94.1 Nominal voltage VAC: 230 Voltage range VAC: 195 ... 265 Sound pressure dB(A): 39 Sound power Bel(A): 5.1 Ball bearing : yes Power consumption Watt: 3.3 Nominal speed min-1: 3,000 Temperature range °C: -20 ... + 75 Service life expectancy L10 (40 C°), hours: 140,000 General description Converter electronics and fan electronics fully integrated Weight 0.25 kg Dimensions 119 x 119 x 38 mm Impeller material Glass fibre reinforced plastic (PA) Housing material Glass fibre reinforced plastic (PBT) Conveying direction Blowing over bars Direction of rotation Right, seen on rotor Bearing Ball bearing Service life L10 at 40 °C 65000 h Service life L10 at max. temperature 25000 h Connection cable via 2.8 x 0.5 blade terminals, optionally also with free-form stranded wires

ELIWELL DST-30 Digital Solar cell thermometer Especially for refrigerated counters and display cabinets Display: LCD 24 x 14 mm Resolution: 0.1°C Display range: -20°C to +80°C Protection class: IP68 Probe: 1 m Operating environment: >100 lux Dimensions (W/H/D): 66 x 30 x 11.6 mm Cut-out: 59.5 x 26 mm

eliwell ID 971 Plus refrigeration controller The IDPlus 961, 971 and 974 controllers are the new version of the ID 961, 971 and 974 models with a modern design and extended functions. The outstanding technical control reliability of the refrigeration points is implemented in the new IDPlus with a larger display, coloured symbols and the rounded front panel; available with display in blue, amber and red as well as white, blue and dark grey front panel.The new ID also offers numerous personalisation options to meet the requirements and wishes of customers. Technical specifications Power supply: 240Va 50/60 Hz Standard ON/OFF function Terminals: Screw terminals / separable (on request) The ID Plus includes an input for PTC/NTC temperature sensors and a relay output for compressor management.The recorded sensor value is shown on the 3-digit display plus sign. TTL port available for the use of the "Copy Card" accessory for quick programming. The corresponding instructions can be found in the download area

eliwell ID 974 Plus refrigeration controller German version The IDPlus 961, 971 and 974 controllers are the new version of the ID 961, 971 and 974 models with a modern design and extended functions. The outstanding technical control reliability of the refrigeration points is implemented in the new IDPlus through a larger display, coloured symbols and the rounded front panel; available with display in blue, amber and red as well as white, blue and dark grey front panels.The new ID also offers numerous personalisation options to meet the requirements and wishes of customers. Technical specifications Power supply: 240Va 50/60 Hz Standard ON/OFF function Terminals: Screw terminals / separable (on request) The ID Plus includes an input for PTC/NTC temperature sensors and a relay output for compressor management.The recorded sensor value is shown on the 3-digit display plus sign. TTL port available for the use of the "Copy Card" accessory for quick programming. Supplied complete with 2 NTC sensors. The corresponding instructions can be found in the download area

Expander set complete with expander heads for 10, 12, 15, 16, 18, 22 mm soft copper, aluminium, with deburrer, in metal case. For the production of standardised precision sockets. The use of expander tools significantly reduces costs for fittings, storage and procurement . Smooth-running expander head thread guarantees quick head change. Price per piece

Fan blade Plastic 26° Inclination, suction, medium pitch Fan blade 150 mm Ø, Order no. VF150 170 mm Ø, order no. VF170 200 mm Ø, order no. VF200 250 mm Ø, Order no. VF250 Ideal for customer service, as insensitive to imbalance!

Connection cable approx. 600 mm for Pabst and NMB fans

Installation aid for refrigerants R134a, R404A, R407C, R22. for refrigeration technicians 2-way pressure gauge, complete in case, with coloured pressure hoses.

Flojet pump T5000130 for bag in box Flojet pump T5000130 is suitable for fruit juice concentrates (without fruit pulp), tea, wine, other alcoholic beverages. Vacuum switch switches off automatically when box is empty. Suitable for operation with air, nitrogen and CO2 and can be regulated via gas/air supply. With quick-release fasteners. Designed for pumping up to 75,000 litres Mulled wine dispenser with compressed air pump with compressed air pump. Pump: Compressed air double diaphragm pump Output up to 7.6 litres / min. Inlet pressure max 0.7 bar Delivery pressure up to 5.5 bar Compressed air max 5.5 bar Temperature +1 °C to -49 °C Materials Polypropylene, Santoprene®, EPDM, stainless steel Approval NSF, FDA, CE, SK 290-001 Dry self-priming up to 4.5 m.

FRIGA BOHN evaporator MF / MFE cold room evaporator Evaporator FRIGA-BOHN, evaporator for cold store, cold room The compact design of the MF fan air cooler makes this series particularly suitable for equipping refrigerated cabinets, catering establishments and small cold rooms for applications in the plus (MF) or minus (MFE) range. Options: KIT EMA kit for wall installation ISO 9001: Our company is certified by the LRQA under the ISO 9001 2000 quality assurance system. RoHs - WEEE: Our products are compliant with the European Directive 2002/95/CE and 2002/96/CE regarding electrical and electronic equipment. CE: Our products are compliant with the European Directive. GOST: Our products are compliant with the CIS standards. Modern technology Aesthetics: White ABS housing. MF louvres with polyester finish Hygiene: Declaration of conformity - CETIM. Hygiene and safety (MF 2) (compliant with standard EN 1672-2). Housing with rounded edges to prevent water accumulation, easy cleaning, low condensation. Corrosion protection: Corrosion-protected housing, fan blades and protective grille. Frame of the MF(E) 2 made of polyamide. Easy access: fully and easily removable housing for cleaning and servicing (all components attached to the upper housing plate). Robust design: Monobloc construction made of impact-resistant ABS. Performance: low refrigerant volume. Low-noise 4-pole motors, fan blades Design: made of polypropylene. Flexibility: Wall mounting possible for MF 2 when using the EMA kit (do not use for MFE 1 and 2).

FRIGA BOHN Evaporator XR Firga Bohn evaporator XR series cooling capacity from 435 W to 1,030 W The evaporators in the XR series are designed for equipping refrigerated cabinets, drinks bars, counters and small cooling chambers, for normal or deep-freezing. The 5 models in the XR series cover a power range from 435 to 1,030 W. Firga Bohn XR evaporator options : KIT / E1K Electronic heating. ATTENTION: The SC3 is only suitable for ceiling mounting. An E1K kit must be fitted ISO 9001: Friga Bohn is certified by the LRQA under the ISO 9001 2000 quality assurance system. RoHs - WEEE: Our products are compliant with the European Directive 2002/95/CE and 2002/96/CE with regard to electrical and electronic equipment. CE: Our products are compliant with the European Directive. GOST: Our products are compliant with the CIS standards. High-performance heat exchanger of the FirgaBohn XR evaporator : The finned coils of the XR series consist of sinusoidally corrugated aluminium fins with a polyester coating and a fin spacing of 4.23 mm as well as internally finned copper tubes. Fans of the Firga Bohn XR vaporiser: The XR series is equipped with closed fans Ø 200 mm, single-phase, 230 V. 50-60 Hz. Class B and is supplied with long-term lubrication and a 1 m long cable 3 x 0.75 mm 2: - 4P=1,500 rpm impedance-protected motor (low noise level) - 2P=3,000 rpm. Motor with built-in thermal contact (high performance) Housing of the Firga Bohn vaporiser XR: Elegant housing made of galvanised steel and plastic, painted white. Access to all components from the front. Mounting in the keyhole-shaped holes can be carried out by a single person. Drilling template printed on the packaging. 8 pre-punched openings for pipe and cable routing. Intermediate drip tray on ceiling-mounted models to reduce condensation. 4 different positions of the drain pipe for ceiling mounting (2 for wall mounting) enable optimum space utilisation. Supplied ex works in the ceiling-mounted version. Simple conversion for wall mounting. Standardised packaging in cardboard boxes

Friga-Bohn evaporators MR MR series from MR135R to MRE270E Evaporators FRIGA-BOHN The evaporators in the MR series are designed to equip cold rooms for cooling or deep-freezing. The 6 models in the MR series cover a power range from 840 to 2,620 W. ISO 9001: Our company is certified by the LRQA under the ISO 9001 2000 quality assurance system. RoHs - WEEE: Our products are compliant with the European Directive 2002/95/CE and 2002/96/CE regarding electrical and electronic equipment. CE: Our products are compliant with the European Directive. GOST: Our products are compliant with the CIS standards. The MR series evaporators are designed to equip cold rooms for refrigeration or deep-freezing. The 6 models in the MR series cover a power range from 840 to 2,620 W. High-performance heat exchangers the finned blocks of the MR series consist of sinusoidally corrugated aluminium fins with a fin spacing of 4.23 or 6.35 mm and internally finned copper tubes. In the MR 270/250/ and MRE 135/120 to MRE 270/250 models, the refrigerant is distributed via a venturi distributor. The MR battery is fully protected with polyester against corrosive atmospheres, among other things FansTheMR andMRE series is equipped with a fan. It is operated with a motor connected to the terminal box (except forMR 75/65), 50-60 Hz in closed design, class B, with impedance protection and permanent lubrication.The protective grilles comply with safety standards. Housing The housing made of recyclable ABS stands for: Robust design: High resistance to thermal shocks (at high and low temperatures) and high mechanical strength, Aesthetic design: The external shape, the careful finishing and the white textured surface allow these devices to be harmoniously integrated into their surroundings. MR slats with polyester finish. Hygiene: Thanks to the rounded corners, bacteria-promoting deposits are avoided. Improved hygiene thanks to the use of non-oxidising parts (e.g. stainless steel fixing screws), safety: no sharp corners or edges Defrosting: The electric heating elements (230 V, single-phase) are mounted in slots under the battery and connected to a terminal box (only for theMRE series). This arrangement makes all maintenance work much easier and ensures homogeneous heat distribution in the battery. This leads to perfect defrosting.The condensate is collected in an intermediate drip tray and drained via a large connection piece (Ø 1“ G). EASY ACCESS: The structure of the MR was designed to facilitate all installation work for commissioning, maintenance and cleaning. Thanks to the polyamide hinges attached to the housing, all evaporator parts are completely accessible (battery, fan motor, heating rods of the defrost heater, connections ... ). These hinges allow the housing to be completely removed.

Nitrogen Pressure regulator For Filling refrigeration and air conditioning systems for prescribed pressure tests and for flushing processes and inert gas filling. Incl. Cylinder filling indicator, application range up to 40 bar. Only suitable for nitrogen. Supplied with 7/16&ldquo connection;

Heavy-duty machine bracket with integrated spirit level Heavy-duty machine bracket with integrated spirit level including 4 vibration dampers. High-quality design. Without fixing screws. 2 mm steel, hot-dip galvanised, powder-coated. Adjustable support beams. For refrigeration and air conditioning systems. Dimensions: (W/D/H): 750/480/420 mm Load capacity: approx. 140 kg Heavy-duty machine bracket

Machine bracket Heavy duty with integrated spirit level including 4 vibration dampers. High-quality design. Without fixing screws. 2 mm steel, hot-dip galvanised, powder-coated. Support beams adjustable. For refrigeration and air conditioning systems. Dimensions (W/D/H): 1000/600/420 mm Load capacity: approx. 140 kg Machine bracket Heavy duty

INSUL-TUBE  COIL Endless insulating tube Flexible Tube insulation made of closed-cell foam based on rubber for use in air conditioning & refrigeration technology. Purchase only PU, price per PU • Minimal waste • Minimal number of butt joints • Prevention of condensation • Minimisation of energy losses Product properties • Thermal conductivity (DIN 52613 / EN ISO 8497): 0.040 W/mK at 40°C 0.038 W/mK at 20°C 0.036 W/mK at 0°C 0.034 W/mK at -20°C • Water vapour diffusion resistance (DIN 52615 / EN 13469): μ ≥ 7000 • Fire behaviour: BLs3d0 (EN 13501-1) equivalent B1 (DIN 4102) self-extinguishing, non-dripping, does not conduct fire • Temperature application range: -40°C to + 105°C (EN 14707) • Sound insulation: up to 32 dB(A) (DIN 52218) The low thermal conductivity of INSUL-TUBE COIL ensures a sufficient surface temperature and thus prevents the formation of condensation. The very good water vapour diffusion resistance guarantees this property over the service life of the system. Due to the very good thermal insulation properties of INSUL-TUBE COIL, the energy consumption for the operation of air conditioning and refrigeration systems can be significantly reduced. This not only increases the economic efficiency, but also the ecological efficiency of the entire system. As a foam product, INSUL-TUBE COIL offers sound-absorbing properties and thus reduces in particular cracking and flow noises in pipes PLEASE NOTE THE PACKAGING UNITS (PU)!!!!

INSUL-TUBE  COIL Endless insulating tube Flexible Tube insulation made of closed-cell foam based on rubber for use in air conditioning & refrigeration technology. Purchase only PU, price per PU • Minimal waste • Minimal number of butt joints • Prevention of condensation • Minimisation of energy losses Product properties • Thermal conductivity (DIN 52613 / EN ISO 8497): 0.040 W/mK at 40°C 0.038 W/mK at 20°C 0.036 W/mK at 0°C 0.034 W/mK at -20°C • Water vapour diffusion resistance (DIN 52615 / EN 13469): μ ≥ 7000 • Fire behaviour: BLs3d0 (EN 13501-1) equivalent B1 (DIN 4102) self-extinguishing, non-dripping, does not conduct fire • Temperature application range: -40°C to + 105°C (EN 14707) • Sound insulation: up to 32 dB(A) (DIN 52218) The low thermal conductivity of INSUL-TUBE COIL ensures a sufficient surface temperature and thus prevents the formation of condensation. The very good water vapour diffusion resistance guarantees this property over the service life of the system. Due to the very good thermal insulation properties of INSUL-TUBE COIL, the energy consumption for the operation of air conditioning and refrigeration systems can be significantly reduced. This not only increases the economic efficiency, but also the ecological efficiency of the entire system. As a foam product, INSUL-TUBE COIL offers sound-absorbing properties and thus reduces in particular cracking and flow noises in pipes PLEASE NOTE THE PACKAGING UNITS (PU)!!!!

INSUL-TUBE  COIL Endless insulating tube Flexible Tube insulation made of closed-cell foam based on rubber for use in air conditioning & refrigeration technology. Purchase only PU, price per PU • Minimal waste • Minimal number of butt joints • Prevention of condensation • Minimisation of energy losses Product properties • Thermal conductivity (DIN 52613 / EN ISO 8497): 0.040 W/mK at 40°C 0.038 W/mK at 20°C 0.036 W/mK at 0°C 0.034 W/mK at -20°C • Water vapour diffusion resistance (DIN 52615 / EN 13469): μ ≥ 7000 • Fire behaviour: BLs3d0 (EN 13501-1) equivalent B1 (DIN 4102) self-extinguishing, non-dripping, does not conduct fire • Temperature application range: -40°C to + 105°C (EN 14707) • Sound insulation: up to 32 dB(A) (DIN 52218) The low thermal conductivity of INSUL-TUBE COIL ensures a sufficient surface temperature and thus prevents the formation of condensation. The very good water vapour diffusion resistance guarantees this property over the service life of the system. Due to the very good thermal insulation properties of INSUL-TUBE COIL, the energy consumption for the operation of air conditioning and refrigeration systems can be significantly reduced. This not only increases the economic efficiency, but also the ecological efficiency of the entire system. As a foam product, INSUL-TUBE COIL offers sound-absorbing properties and thus reduces in particular cracking and flow noises in pipes PLEASE NOTE THE PACKAGING UNITS (PU)!!!!