Beer cooler tapping systems Cooling unit repair
Simply repair a beer dispenser, beer cooler or accompanying cooler
In most cases, it is only small things that are faulty in a beer cooler, accompanying cooler, dispensing system or bar, but these can have major consequences. They are often small parts such as a propeller on a blast chiller, the door seal on your bar counter or a thermostat on your refrigeration system. These things are usually easy to repair yourself.
Original spare parts and tools for repairing your beer cooler
And if you want to repair your beer cooling system, we also offer a wide range of suitable items. Buy the right top-quality spare parts for repairing your beer dispensing system from us too! Our competent customer service team will be happy to answer any questions you may have.
Agitator motor for beer cooler water bath Agitator motor for beer cooler with water bath complete with blade. Insulation class: B(155° C) Thermal protection: Impedance protected Power consumption: 20W Motor speed: 2,800 rpm IP protection: IP 55 Power supply: 230V, 50/60Hz
Armaflex Adhesive tape 15 m roll for self-assembly of pythons self-adhesive, B2 • roll size: 15 m x 50 mm x 3 mm. • Colour: black
Armaflex Adhesive tape 15 m roll for self-assembly of pythons self-adhesive, B2 • roll size: 15 m x 50 mm x 3 mm. • Colour: black
Contents: 15 Laufende(r) Meter (£1.17 / 1 Laufende(r) Meter)
PVC tape black for wrapping insulation 33 m roll, 50 mm wide
Contents: 33 Laufende(r) Meter (£0.19 / 1 Laufende(r) Meter)
Bracket for pressostat/thermostat for Mounting on e.g. slab floor
Bracket for pressostat/thermostat For wall mounting
Capillary tube cutting pliers CTP-1 • This enables capillary tubes to be cut without crushing of the inside diameter • Suitable for all capillary tube sizes
CASTEL Dryer/sight glass combination with Solder connection TSK with Filter drier FT082, with 6 mm Solder connection Order noPart no. TSK6S TSK with filter drier FT083, with 10 mm Solder connection Part no. TSK10S TSK with filter drier FT164, with 12 mm Solder connection Part no. TSK12S
Filter drier with screw thread 7/16“ UNF (for 6mm CU pipe) 052 Order no. FT052 5/8“ UNF (for 10mm CU pipe) 053 Order noNo. FT053 7/16“ UNF (for 6mm CU pipe) 082 Order no. FT082 5/8“ UNF (for 10mm CU pipe) 083 Order no. FT083 3/4“ UNF (for 12mm CU pipe) 084 Order no Part no. FT084 7/16“ UNF (for 6mm CU pipe) 162 Part no. FT162 5/8“ UNF (for 10mm CU pipe) 163 Part no No. FT163 3/4“ UNF (for 12mm CU pipe) 164 Order no. FT164 7/8“ UNF (for 15mm CU pipe) 165 Please specify version, please pay attention to the FT values!!!
Filter-drier with Solder connection 6 mm Solder connection 032S Order no. FT032S 6 mm Solder connection 052S Order no. FT052S 6 mm Solder connection 082S Order no. FT082S 10 mm Solder connection 083S Order no. FT083S Part no. FT082S 10 mm solder connection 083S Part no. FT083S Please specify version, please pay attention to the FT values!!!
Castel nozzle insert for thermostatic expansion valve for thermostatic expansion valve Compatible with Danfoss and Castel
CASTEL Plug suitable for solenoid valves 6-15 mm including 3 m connection cable
CASTEL Sight glass with internal and external thread 7/16“ UNF (for 6 mm CU pipe) Order no. SG6IA 5/8“ UNF (for 10 mm CU pipe) Order noNo. SG10IA 3/4“ UNF (for 12 mm CU pipe) Order no. SG12IA 7/8“ UNF (for 15 mm CU pipe) Order no. SG15IA
CASTEL Sight glass with Solder connection Sight glass 6 mm Order no. SG6L Sight glass 10 mm Order no. SG10L
Castel solenoid valve MV series Castel solenoid valve 1020/3A6 MV including coil 230 V, without plug Flare fitting Version: 6 mm, order no. MV 6B 10 mm, order no. MV 10B 12 mm, order no. MV 12B 15 mm, order no. MV 15B Solder connection version: 6 mm, order no. MV 6L 10 mm, order no. MV 10L 12 mm, order no. MV 12L 15 mm, order no. MV 15L
Castel thermostatic expansion valve Evaporation temperature range -40°C to +10°C, Replaceable nozzle insert (compatible with standard nozzle inserts from various manufacturers, e.g. Danfoss). Supplied without nozzle insert. Includes practical sensor clip. Flared design with internal pressure equalisation SAE flare 3/8 inch and 1/2 inch R134a Order no. EB-TN2 R404A / R507 Order no. EB-TS2 Flared version with external pressure equalisation SAE flare 3/8 inch and 1/2 inch as well as 1/4 inch R134a Order no. EB-TEN2 R404A / R507 Order no. EB-TES2 Brazed version with internal pressure equalisation SAE flare 3/8 inch and 12 mm solder. R134a Order no. EL-TN2 R404A / R507 Order no. EL-TS2 Brazed version with external pressure equalisation SAE flare 3/8 inch and 12 mm as well as 6 mm solder. R134a Order No. EL-TEN2 R404A / R507 Order No. EL-TES2
Compressor Acc Cubigel ACC Cubigel spare part compressor R134a high and medium pressure -25°C / +10°C Cooling capacity in watts at: Ambient temperature: 32°C Suction gas temperature: 32°C Condensation temperature: 55°C Liquid subcooling: OK
Copper Solder sleeves 10 pieces per PU, price per PU Copper sleeve 6 mm, 8 mm, 10 mm, 12 mm, 16 mm,
Copper Solder T-connector 10 pieces per PU, price per PU T-connector 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, T-connector 10-6-10 10 mm,
Copper Solder bend 90° 10 pieces per PU, price perVE Copper bend 10 mm, 12 mm, 16 mm,
Countertop evaporator TVI K&M Holland for catering refrigeration units for centre bar mounting Ideal for use in catering refrigeration units with a cabinet width of up to 1.2 m Technical details: • without valve • incl. holder and defrost water tray • evaporator surface 1.8 m2 • cooling capacity approx. 300 W (with R404A, DT1=10K) • Tube capacity 0.28 litres • Nominal voltage 230 V / 50 Hz • Electrical output 19 W • Degree of protection IP20 • Max. permissible pressure 28 bar • Fluid group 2 • Min. permissible temperature -40 C° • Max. permissible temperature 100 C° • Mains cable 3 m, 3 x 1 mm2
Countertop evaporator DTV1 „Holland“ for ceiling mounting Ideal for use in catering refrigeration units with body width up to 1.2 m Technical Details: • without valve • Incl. holder and defrost water tray • Evaporator surface 1.8 m2 • Refrigeration capacity approx. Holder and defrost water tray • Evaporator surface 1.8 m2 • Cooling capacity approx. 300 W (with R404A, DT1=10K) • Tube capacity 0.28 litres • Nominal voltage 230 V / 50 Hz • Electrical output 19 W • Degree of protection IP20 • Max. permissible pressure 28 bar • Fluid group 2 • Min. permissible temperature -40 C° • Max. permissible temperature 100 C° • Mains cable 3 m, 3 x 1 mm2
Countertop evaporator TV2 „Holland“ for centre bar installation Ideal for use in catering refrigeration units with body width up to 2 m Technical Details: • without valve • Incl. holder and defrost water tray • Evaporator surface 2.2 m2 • Cooling capacity approx. Holder and defrost water tray • Evaporator surface 2.2 m2 • Cooling capacity approx. 500 W (at R404A, DT1=10K) • Tube capacity 0.34 litres • Nominal voltage 230 V / 50 Hz • Electrical power 19 W • Degree of protection IP20 • Max. permissible pressure 28 bar • Fluid group 2 • Min. permissible temperature -40 C° • Max. permissible temperature 100 C° • Mains cable 3 m, 3 x 1 mm2
Countertop evaporator WTV1 „Holland“ for WALL mounting Ideal for use in catering refrigeration units with body width up to 1.2 m Technical Details: • without valve • Incl. holder and defrost water tray • Evaporator surface 1.8 m2 • Refrigeration capacity approx. Holder and defrost water tray • Evaporator surface 1.8 m2 • Cooling capacity approx. 300 W (with R404A, DT1=10K) • Tube capacity 0.28 litres • Nominal voltage 230 V / 50 Hz • Electrical output 19 W • Degree of protection IP20 • Max. permissible pressure 28 bar • Fluid group 2 • Min. permissible temperature -40 C° • Max. permissible temperature 100 C° • Mains cable 3 m, 3 x 1 mm2