Dispensing column WITHOUT TAPS Model „Brauhaus“ made of CNS black matt lacquered, brass parts polished, with snake and pressure gauge. Height total 1,025 mm, height crossbar approx. 477 mm, height centre of tap 400 mm. Base 104 mm Ø, cross tube diameter 154 mm or 168 mm. With inspection opening on the host side, tap distance 110 mm. Delivery including two solid mushroom lid holders. CNS black, matt, B=width 4-pipe, B 600 mm 5-pipe, B 740 mm 6-pipe, B 880 mm 7-pipe, B 1,020 mm 8-pipe, B 1,160 mm Please order dispensing taps in the dispensing taps section

„Operating instructions“ for beverage dispensing systems Dimensions: W/H 240/182 mm Color: yellow, Printing 1-color black Sign made of 1 mm polystyrene ALTERNATIVE Sticker 0.1 mm SK film

"Warning of gas accumulation" sign Dimensions: W/H 240/182 mm Colour: yellow, Print 1-colour black Sign 1.0 mm thick Price per item ALTERNATIVE Sticker SK-foil Dimensions: W/H 130/170 mmColour: yellow,Print 1-colour black 0.3 mm thick

1 metre beverage hose with approved SK number 10 mm ID 16 mm OD up to 3 bar pressure load very soft, flexible and crystal clear suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine Please specify how many metres you require in the quantity. Hose is supplied in one piece

10 mm beer hose nozzle, bent, made of stainless steel Beer hose nozzle, bent NW 10 mm with collar and shoulder, made of stainless steel, self-sealing ATTENTION: NOTE BUNCH PRICES!!!

10 mm beer hose nozzle spout bent stainless steel beer hose Co2 hose is used on beer and Co2 hoses / material: stainless steel (only available in stainless steel) with seal Dimensions: 53 x 53 mm Nipple length: 20 mm Nipple outer diameter: 12 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut

Beer hose nozzle 90° bent NW 10 mm made of stainless steel 1.4301 with collar and shoulder for insertion 14 x 8 mm ATTENTION: NOTE STACKED PRICES!!! (see below)

10 mm straight stainless steel beer hose nozzle Beer spout made of stainless steel 1.4301with collar and shoulder for insertion 14 x 8 mm, ATTENTION: NOTE BUNCH PRICES!!!

10 mm straight stainless steel beer hose nozzle Beer spout made of stainless steel 1.4301with collar and shoulder for insertion 14 x 8 mm, ATTENTION: NOTE BUNCH PRICES!!!

10 x - 4 mm (7.5 - 9 mm) hose clamps beer line beer hose tap system This one-ear hose clamp is made entirely of stainless steel (1.4301) and prevents the hose from pinching due to its stepless design. This clamp can be squeezed together with a pair of pliers or pinchers without pinching the hose. So 100% tightness guaranteed.

4 mm (7.5 - 9 mm) clamps hose clamps beer pipe This 1-ear hose clamp is made entirely of stainless steel (1.4301) and its stepless design prevents the hose from being pinched.The clamp can be squeezed with a pair of pliers or pinchers without pinching the hose. So 100% tightness guaranteed.

10 x 7mm (14.8 mm) clamps Hose clamps This 1-ear hose clamp is made entirely of stainless steel (1.4301) and prevents the hose from being pinched together thanks to its stepless design.The clamp is pinched together with a pair of pliers or pinchers without pinching the hose. So 100% tightness guaranteed.

100 mtr. 10 mm beer hose beer Co2 hose  100 meters of beverage hose with approved SK - number.

100x sponge balls for 10 mm pipe cleaning You are bidding on 100 sponge balls for 10 mm pipes (inside)

100x sponge balls for 7 mm pipe cleaning You are bidding on 100 sponge balls for 7 mm pipes (inside)

10mm hose nozzle grommet + union nut 3/4" wing nut Co2 water connection Spout in 10mm Material: Stainless steel, with seal Length: 39mm Nipple length: 25mm Nipple outer diameter: 12mm Nipple inner diameter: 10mm clamp required: 10mm (19.2mm clamping range) required hose: 10mm hard or soft (inside)

10x clamps beer hose hose clamps hose clamps tap system Clamping range 5.7 - 7.0 mm Clamping range 7.3 - 9.0 mm for 4 mm Co2 hose and thin Co2 nozzles Clamping range 8.8 - 10.5 mm for 4 mm beer / Co2 hose for use with self-sealing 4 mm nozzles Clamping range 10.8 - 13.3 mm for 6 mm Coca / Pepsi nozzles and Aqua hose 8 x 12 mm Clamping range 12.3 - 14.8 mm for 7 mm beer / Co2 hose Clamping range 14.5 - 17.0 mm for thin 10 mm beer / Co2 tubing (usually 16 - 19.2 mm are used) Clamping range 16.0 - 19.2 mm for 10 mm beer / Co2 hose

150 metre 7 mm beer hose Beer Co2 hose 150 metre beverage hose with approved SK number.

2 mtr. 10 mm beer hose Co2 hose beer dispenser by the metre You are buying 2.0 metres of beverage hose with an approved SK number Please specify how many 2 metres you require in the quantity. Hose is supplied in one piece e.g. if you enter a quantity of 10, you will receive 20 metres in one piece. 10 mm ID 16 mm OD up to 8 bar pressure load

2 mtr. 4 mm beer hose Co2 hose beer line by the metre You are bidding on 2.0 metres of beverage hose with an approved SK number. Please specify how many 2 metres you require in the quantity. Hose is supplied in one piece e.g. if you enter a quantity of 10, you will receive 20 metres in one piece. 4 mm ID 8 mm OD up to 11 bar pressure load

2 mtr. 7 mm beer hose Co2 hose beer line by the metre You are bidding on 2.0 metres of beverage hose with approved SK number 366-004. Please specify how many 2 metres you require in the quantity. Hose is supplied in one piece e.g. if you enter a quantity of 10, you will receive 20 metres in one piece. 7 mm ID 12 mm OD up to 8 bar pressure load

200 mtr. 4 mm beer hose Beer Co2 hose 200 mtr. 4 mm beer hose Beer Co2 hose with approved SK number. 4 mm ID 8 mm OD up to 11 bar pressure load

20x sponge balls 16 mm cleaning ball for 1/2" hose You are bidding on 20 pieces of sponge balls in 16mm for a 1/2" hose

20x sponge balls for 10 mm pipe cleaning You are bidding on 20 sponge balls for 10 mm pipes (inside)