Dispensing system assembly and accessories

5 seals 3/4" white for Co2 fittings spigot 5 polythene rings 13 x 23 x 3

5 seals vulcanised fibre rings red for pressure reducer Co2 5 pieces vulcanised fibre rings 12 x 18 x 3

5/8" hexagon nut Union nut Beer hose nut

5/8" wing nut union nut nut beer hose nozzle nozzle tap system

50 mtr. 10 mm beer hose Co2 hose soft crystal clear flexi 50 metre beverage hose with approved SK number 10 mm ID 16 mm OD up to 3 bar pressure load very soft, flexible and crystal clear suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine

50 mtr. 7 mm beer hose Co2 hose soft crystal clear flexi 50 metre beverage hose with approved SK number 7 mm ID 12 mm OD up to 7 bar pressure load very soft, flexible and crystal clear suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine

7 mm beer hose nozzle nozzle bent beer hose Co2 hose used on beer and Co2 hoses Material: nickel-plated brass, with seal Dimensions: 53 x 43 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut

Beer hose nozzle straight NW 7 mm made of stainless steel 1.4301 with collar and shoulder for 14 x 8 mm insertion, ATTENTION: NOTE STACKED PRICES!!! (see below)

Beer hose nozzle straight NW 7 mm made of stainless steel 1.4301 with collar and shoulder for 14 x 8 mm insertion ATTENTION: NOTE STACKED PRICES!!! (see below)

7 mm beer hose nozzle nozzle straight beer hose Co2 is used on beer and Co2 hoses / Material: nickel-plated brass, with seal Length: 39 mm Nipple length: 20 mm Nipple outer diameter: 9.5 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut

Adapter 5/8 inch AG to 3/4 inch AG Co2 carbon dioxide tap connector Adapter made of nickel-plated brass from 5/8" AG to 3/4" AG

Adapter 5/8 inch IG to 3/4 AG Adapter Keg Co2 dispensing head dispensing system R-piece You need the adapter if you still have an old dispensing head (keg) where the Co2 connection is still designed with 5/8"

Adapter for AFG screw connection to beer tapping gun Our high-quality adapter allows you to easily connect your AFG screw fitting to your beer tapping gun. With a thread on the spout and a VA adapter, this adapter fits perfectly to a 1/2" CC x 6.7 mm spout. With this handy adapter, you can quickly and easily connect your tap gun to your AFG system to dispense your favourite beverages in style. Get your adapter today and enjoy effortless tapping!

Armaflex Adhesive tape 15 m roll for self-assembly of pythons self-adhesive, B2 • roll size: 15 m x 50 mm x 3 mm. • Colour: black

Beer cooling and stilling coil stainless steel Beer cooling coil made of CNS for depressurisation NW 7 mm, complete with wall mounting. 6 cm square, approx. 4 m long Pressure reduction approx. 0.2 bar/m coil=0.8 bar.

Beer cooling coil made of stainless steel This cooling and calming coil made of stainless steel is perfect for keeping your beer at a pleasant drinking temperature. With dimensions of 11 x 0.5 mm and a length of 7 metres, it ensures efficient cooling. Features: NW: 10 mm Dimensions: 20.5 cm high, 14 cm Ø Available versions: rotated left and right Get this high-quality beer cooling coil made of stainless steel now and enjoy your beer chilled at all times. Cheers!

Beer hose beer line complete 10 mm hard 1,7 mtr.  This hose consists of: 1,7 mtr. 10 mm beer hose with SK sign both sides with 5/8" connection each with wing nut  one bent grommet one straight grommet

Beer hose Beer pipe + Co2 hose complete for beer These hoses consist of: 1.7 mtr. 7 mm beer hose with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 1.7 mtr. 4 mm Co2 hose with SK mark with 3/4" connection on both sides, each with wing nut two straight nozzles

Beer hose Beer pipe complete 4 mm 2 mtr. This hose consists of: 2 mtr. 4 mm beer hose with SK mark with 5/8" connection on both sides a curved nozzle (stainless steel) with hexagon nut (connection to the tap) one straight spout (stainless steel) with wing nut

Beer hose Beer line complete 4 mm 2 mtr. tap system Beer hose in 4mm and 2m long, completely ready for use This beer hose is ideal for anyone who keeps their beer cold and uses a piston tap, e.g. for a beer bar (dispensing system with fridge). We recommend a working pressure of 0.9 - 1.2 bar, so that the beer can be tapped over a longer period of time without carbonising. This hose consists of: 2 mtr. 4 mm beer hose with SK mark with 5/8" connection on both sides a bent stainless steel nozzle with seal and hexagon nut one straight stainless steel spout with seal and wing nut We are happy to assemble the hoses according to your requirements, please contact us. Absolute hammer price!!! Brewery quality!!! For further hose material and connection material please click on Connection material

Beer hose Beer pipe complete 7 mm 1.7mtr. This hose consists of: 1.7 mtr. 7 mm beer hose with SK mark on both sides with 5/8" connection, wing nut + 6kt nut one bent spout one straight nozzle

Beer hose Beer pipe crystal clear 7 or 10 mm crystal clear Pressure load: 7 mm=9.7 bar, 10 mm=6.5 bar. PVC beer hose NW 7 mm (7 x 12 mm) NW 10 mm (10 x 16 mm) Price per metre. ATTENTION: GRADUATED PRICE !!!!

Beer hose Co2 hose nozzles nuts tapping system beer tapping system beer pipe 1.) Co2 spout straight 2.8 mm 1 piece is used on Co2 hoses / Material: nickel-plated brass, with seal Length: 28 mm Nipple length: 15 mm Nipple outer diameter: 5 mm Nipple inner diameter: 2.8 mm clamp required: 4 mm small (9.5 mm) required hose: 4 mm inside suitable nut: 5/8"; 3/4"; as hexagon or wing nut 2.) 2.7 mm beer hose nozzle straight 1 piece is used on beer and Co2 hoses / material: nickel-plated brass, with seal Length: 39 mm Nipple length: 20 mm Nipple outer diameter: 9.5 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 3.) 10 mm beer spout straight 1 piece can be used on beer and Co2 hoses / material: stainless steel, with seal Length: 35 mm Nipple length: 18 mm Nipple outer diameter: 11.5 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 4.) 7 mm hose nozzle bent 1 piece can be used on beer and Co2 hoses / material: nickel-plated brass, with seal Dimensions: 53 x 43 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nuts 5.) 10 mm hose nozzle bent 1 piece is used on beer and Co2 hoses / material: stainless steel (only available in stainless steel) with seal Dimensions: 53 x 53 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 10 mm required clamp: 10 mm (19.2 mm clamping range) required hose: 10 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 6.) 4 mm spout straight stainless steel 1 piece can be used on beer hoses / material: stainless steel, with seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 4 mm clamp required: 4 mm large (10.5 mm clamping range) required hose: 4 mm (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut Note! Difficult to fit in hose, hot air gun required. 7.) 7 mm spout straight stainless steel 1 piece is used on beer hoses / Material: stainless steel, with seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 8.) 10 mm spout straight stainless steel 1 piece can be used on beer hoses / material: stainless steel with moulded seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 12 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 9.) 4 mm spout bent stainless steel 1 piece can be used on beer hoses / material: stainless steel with seal Dimensions: 50 x 50 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 4 mm clamp required: 4 mm large (10.5 mm clamping range) required hose: 4 mm (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut Note! Difficult to fit in hose, hot air gun required. 10.) 7 mm spout bent stainless steel 1 piece is used on beer hoses / Material: stainless steel with seal Dimensions: 60 x 46 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 11.) 10 mm spout bent stainless steel 1 piece is used on beer hoses / material: stainless steel with moulded seal Dimensions: 56 x 52 mm Nipple length: 20 mm Nipple outer diameter: 12 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm soft or hard (inside) 12.) 3/4" wing nut brass 1 piece is used on CO2 hoses / material: nickel-plated brass fits over all nozzles shown above Inner dimension: approx. 26.16 mm 13.) 5/8" hexagon nut brass 1 piece is used on beer hoses / material: nickel-plated brass fits over all spouts shown above Internal dimension: approx. 22.63 mm Width across flats: 25 14.) 3/4" hexagon nut brass 1 piece is used on CO2 hoses / Material: nickel-plated brass fits over all nozzles shown above Internal dimension: approx. 26.16 mm Width across flats: 30 15.) 4 mm clamps small 10 pieces suitable for thin nozzles such as Co2 nozzle 2.8 mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 7.3 - 9.0 mm 16.) 4 mm clamps large 10 pieces suitable for thicker spouts such as beer spouts 4 mm stainless steel Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 8.5 - 10.5 mm 17.) 7 mm hose clamps 10 pieces suitable for beer and Co2 nozzle 7mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 12.3 - 14.8 mm 18.) 10 mm clamps 10 pieces suitable for beer and Co2 nozzle 10 mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 16.0 - 19.2 mm 19.) Clamping pliers 1 piece commercially available pinching pliers, required to pinch clamps around the grommets 20.) 4 mm hose by the metre Beverage hose with approved SK number 4 mm ID 8 mm OD up to 11 bar pressure load suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine slightly milky and very flexible for quantity=number of metres; delivery in one piece up to 200 mtr. 21.) 7 mm soft hose by the metre Beverage hose with approved SK number Size 7 x 12 mm suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine very soft, flexible and crystal clear Pressure load up to 3 bar for quantity=number of metres; delivery in one piece up to 50 mtr. 22.) 10 mm soft hose by the metre Beverage hose with approved SK number Size 10 x 15.6 mm suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine very soft, flexible and crystal clear Pressure load up to 3 bar for quantity=number of metres; delivery in one piece up to 50 mtr. 23.) 7 mm hard hose by the metre Beverage hose with approved SK number 7 mm ID 12 mm OD up to 8 bar pressure load suitable for all beverages e.g. beer, spirits, soft drinks or wine slightly milky and still flexible for quantity=number of metres; delivery in one piece up to 150 mtr. 24.) 10 mm hose hard by the metre Beverage hose with approved SK number 10 mm ID 16 mm OD up to 8 bar pressure load suitable for all beverages e.g. beer, spirits, soft drinks or wine slightly milky rigid, less flexible hose for quantity=number of metres; delivery in one piece up to 100 mtr. 25.) Co2 hose completely assembled 1.7 mtr. 1.7 mtr. Co2 hose with SK mark with 3/4" connection on both sides, each with wing nut two straight spouts 26.) 7 mm soft beer hose completely assembled 1.5 mtr. 1.5 mtr. 7 mm beer hose soft and crystal clear with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 27.) 7 mm beer hose hard completely assembled 1.7 mtr. 1.7 mtr. 7 mm beer hose with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 28.) 10 mm soft beer hose completely assembled 1.5 mtr. 5 mtr. 10 mm beer hose soft and crystal clear with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 29.) 10 mm beer hose hard completely assembled 1.7 mtr. 1.7 mtr. 10 mm beer hose with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout

Beer hoseCO2 hose for tapping systems 7mm soft crystal clear By the metre Item properties Beer hose for tapping systems: 1 metre beverage hose with approved SK number 7 mm ID 12 mm OD up to 3 bar pressure load very soft, flexible and crystal clear suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine Please specify how many metres you require in the quantity. Hose is supplied in one piece