Dispensing tap
Discover high-quality taps and dispensing taps for the precise dispensing of beverages of all kinds. Whether beer, soft drinks or wine - our models offer long-lasting quality, easy handling and perfect dispensing. Ideal for catering, events or private use.
Seal for beer cooler Top hat gasket for sealing between the back of the beer tap and the beer cooler. For tap spouts with 14 x 8 mm recess.
Spacer sleeve for tap Spacer sleeve for tap thread, plastic, chrome-plated. From 10 mm to 60 mm
Spacer sleeve for tubular columns consisting of sleeve for radius 104 mm outside and counterpart inside (inside unmachined).
Connecting piece for CMB expansion joint tap extension Threaded connection piece for CMB expansion joint tap V10, V20 or BA1000, 5/8" threaded extension (endlessly extendable) Available version: 25 mm extension, NW 7 mm 50 mm extension, NW 7 mm ATTENTION: Only suitable for dispensing taps from the manufacturer CMB !!!!
Spout for beer tap Spout for beer tap with thread for beer tap SK 196.002, short version, 9.5 mm Ø.
Stainless steel compensator tap Model „TURBO“ for 10 or 15 mm pipes Compensator made of stainless steel. At beer temperature between 5°-6°C and a pressure of 0.8 to 3.0 bar dispensing speed of 1 litre per 5 sec. Threaded connection 55 mm. For 10 mm pipe 13 mm outlet For 15 mm pipe 16 mm outlet SK-168-011
Piston dispensing tap made of chrome nickel steel (stainless steel) polished or CNS gold-plated, with foam button. Housing and piston. Thread made of CNS. Threaded spigot 55 mm.
Stout tap Made entirely of stainless steel including spout with creaming plate Threaded spout 20 mm
Tap cold plate for trace cooling Nickel-plated brass H/W/D 48/40/15 mm, with 2 screw-in nozzles 1/4“, optionally NW 7 mm or NW 10 mm straight or bent. Plastic grommets must be glued in on site with Loctite 405 superglue. Please specify the required NW and shape when ordering
Tap for mulled wine, tap for hot and cold drinks Ball tap for mulled wine, mulled beer. This tap is suitable for hot and cold drinks. Chrome-plated finish Spigot length: 55 mm
tap spanner beer tap tap dispensing system Is required to dismantle / assemble the piston tap / compensator tap during cleaning.
Tap Rosettes CNS or brass Tap washer Tap gasket Rubber Black Locknut 5/8“ Brass nickel-plated
Tap spanner, spanner for tap, heavy-duty design
Through spigot 5/8 inch VA Threaded on both sides Single-stage, without accessories, please order nuts + washers separately Straight-through spigot: 7 mm inside diameter 10 mm inside diameter Length: 80 mm stainless steel 110 mm Stainless steel 150 mm stainless steel Nut and washer not included in the scope of delivery.
Piston tap V20 made of stainless steel Housing CNS polished, matt or CNS gold-plated. With foam button. Housing, piston and thread made of CNS. Threaded spigot 55 mm. SK-168-013
Water compensator tap Rapid tap for 5/8 inch tap hole with compensator Self-closing, Trapezoidal handle with John Guest quick connector for 8 mm OD hose .
Wine tap X2 black CR 7 mm manual Threaded spigot 55 mm. Use plastic connection spout or stainless steel SK-168-009
Yoke fitting with knurled screw 0.156”, grey order no. JF156 1/2”, BSF, red order no. JF12 7/16”, UNF, black order no. JF716 SK-168-002