Dispensing column, petrol pump for dispensing system

Dispensing column WITHOUT TAPS Model „Brauhaus“ made of CNS black matt lacquered, brass parts polished, with snake and pressure gauge. Height total 1,025 mm, height crossbar approx. 477 mm, height centre of tap 400 mm. Base 104 mm Ø, cross tube diameter 154 mm or 168 mm. With inspection opening on the host side, tap distance 110 mm. Delivery including two solid mushroom lid holders. CNS black, matt, B=width 4-pipe, B 600 mm 5-pipe, B 740 mm 6-pipe, B 880 mm 7-pipe, B 1,020 mm 8-pipe, B 1,160 mm Please order dispensing taps in the dispensing taps section

Bar dispensing column model "RJ3" 3 to 4 conductors Here we offer you our popular bar dispensing column model "RJ3". You can order the beer dispensing column in various surface designs. Of course, this dispensing column is also used in the catering trade. The beer dispenser is fastened with 4 x M8 threaded rods. The fastening material is included in the scope of delivery. Technical data: Material: stainless steel, removable lid 510 mm, height MH 400 mm Width 500 mm Depth 160 mm Base 129 mm Ø. 3 or 4 lines (for 3 or 4 taps) Design: Matt brushed stainless steel, Polished stainless steel, TIN-gold coloured, (SCRATCH RESISTANT GOLD OPTICS) Scope of delivery: Dispensing column 4 x M8 threaded rods for fastening The dispensing column is supplied WITHOUT taps, please order these in the section Dispensing taps !

Dispensing column Beer dispenser STAINLESS STEEL model Tera Here we offer you our popular beer dispenser model Terar. You can order the beer dispenser in various surface designs. Of course, this dispenser is also used in the catering trade. The beer dispenser is attached to the beer counter or beer bar using 4 x threaded rods Beer bar or counter counter. The fastening material is included in the scope of delivery. Technical specifications: Material: Stainless steel, with inspection flap for tap mounting Height: 460 mm, to centre of tap 400 mm Diameter of standpipe 104 mm Dispensing pipe diameter 114 mm 2 ltg. Width 310 mm, tap distance 110 mm 3 ltg. Width 530 mm, tap distance 145 mm 4 ltg. Width 530 mm, tap spacing 110 mm Design: Matt brushed stainless steel Polished stainless steel Polished stainless steel TIN-gold coloured (SCRATCH RESISTANT GOLD OPTICS) Scope of delivery: Dispensing column 4 x M8 threaded rods for fastening The dispensing column is supplied WITHOUT taps, please order these in the section Dispensing taps !

Dispensing tower Beer dispenser STAINLESS STEEL model Tower Here we offer you our popular Tower model beer dispenser. You can order the beer dispenser in various surface designs. The 2-pipe dispensers have a larger diameter so that you have more space when installing them. Of course, this dispenser is also used in the catering trade. The beer dispenser can be installed with a central threaded pipe with union nut in the beer counter or beer bar Beer bar or counter counter. Alternatively, you can also attach the beer dispenser with 2 x M8 threaded rods. Both mounting options are included in the scope of delivery. For the Tap Spacer sleeves adapted to the diameter are also Spacer sleeves are also included in the scope of delivery. Technical data of the beer dispenser: Material: Stainless steel, removable lid Height: 510 mm, to centre of tap 410 mm Diameter 80 mm or 114 mm 1 or 2 lines (for 1 or 2 taps) Design: Matt brushed stainless steel, 1-pipe, 80 mm Ø, 1-pipe, 114 mm Ø, 2-pipe 114 mm Ø, Polished stainless steel, 1-pipe, 80 mm Ø, 1-pipe, 114 mm Ø, 2-pipe 114 mm Ø, Polished stainless steel TIN-gold coloured (SCRATCH-RESISTANT GOLD OPTICS), 1-pipe, 80 mm Ø, 2-pipe 114 mm Ø, Scope of delivery Dispensing column: Dispensing column Central threaded tube for fastening 2 x M8 threaded rods for fastening adapted spacer sleeves for tap installation The dispensing column is supplied WITHOUT taps, please order these in the section Dispensing taps !

Dispensing tower Beer dispenser STAINLESS STEEL model Tower Here we offer you our popular Tower model beer dispenser. You can order the beer dispenser in various surface designs. The 2-pipe dispensers have a larger diameter so that you have more space when installing them. Of course, this dispenser is also used in the catering trade. The beer dispenser can be installed with a central threaded pipe with union nut in the beer counter or beer bar Beer bar or counter counter. Alternatively, you can also attach the beer dispenser with 2 x M8 threaded rods. Both mounting options are included in the scope of delivery. For the Tap Spacer sleeves adapted to the diameter are also Spacer sleeves are also included in the scope of delivery. Technical data of the beer dispenser: Material: Stainless steel, removable lid Height: 510 mm, to centre of tap 410 mm Diameter 80 mm or 114 mm 1 or 2 lines (for 1 or 2 taps) Design: Matt brushed stainless steel, 1-pipe, 80 mm Ø, 1-pipe, 114 mm Ø, 2-pipe 114 mm Ø, Scope of delivery Dispensing column: Dispensing column Central threaded pipe for fastening 2 x M8 threaded rods for fastening adapted spacer sleeves for tap installation The dispensing column is supplied WITHOUT taps, please order these in the section Dispensing taps !

Dispensing tower Beer dispenser STAINLESS STEEL model Tower Here we offer you our popular Tower model beer dispenser. You can order the beer dispenser in various surface designs. The 2-pipe dispensers have a larger diameter so that you have more space when installing them. Of course, this dispenser is also used in the catering trade. The beer dispenser can be installed with a central threaded pipe with union nut in the beer counter or beer bar Beer bar or counter counter. Alternatively, you can also attach the beer dispenser with 2 x M8 threaded rods. Both mounting options are included in the scope of delivery. For the Tap Spacer sleeves adapted to the diameter are also Spacer sleeves are also included in the scope of delivery. Technical data of the beer dispenser: Material: Stainless steel, removable lid Height: 510 mm, to centre of tap 410 mm Diameter 80 mm or 114 mm 1 or 2 lines (for 1 or 2 taps) Design: Matt brushed stainless steel, 1-pipe, 80 mm Ø, 1-pipe, 114 mm Ø, 2-pipe 114 mm Ø, Polished stainless steel, 1-pipe, 80 mm Ø, 1-pipe, 114 mm Ø, 2-pipe 114 mm Ø, Polished stainless steel TIN-gold coloured (SCRATCH-RESISTANT GOLD OPTICS), 1-pipe, 80 mm Ø, 2-pipe 114 mm Ø, Scope of delivery Dispensing column: Dispensing column Central threaded tube for fastening 2 x M8 threaded rods for fastening adapted spacer sleeves for tap installation The dispensing column is supplied WITHOUT taps, please order these in the section Dispensing taps !

Blanking plug for dispensing column Dispensing column Blanking plug for dispensing pump, chrome Blanking plugwith 4 mm thread

BluTower dispensing tower for water dispenser Dispensing tower for table-top installation, specially designed for serving table water. 140 mm Ø, front height 400 mm, Rear height 444 mm, Dispensing height 322 mm Weight: 5 kg

BluTower dispensing tower for BLACK water dispenser Dispensing column for table-top installation, specially designed for serving table water. 140 mm Ø, front height 400 mm, Rear height 444 mm, Dispensing height 322 mm Weight: 5 kg

Bridge dispensing column WITHOUT TAPS Version CNS matt-polished, CNS polished or TIN gold-coloured. with flange, made of 104 mm Ø tube Height 452 mm, height MH 400 mm, Tap spacing 110 mm. CNS matt-polished, B=width 3-pipe, B 815 mm 4-pipe, B 925 mm 5-pipe, B 1,035 mm 6-pipe, B 1,145 mm CNS polished, B=width 3-pipe, B 815 mm 4-pipe, B 925 mm 5-pipe, B 1.035 mm 6-pipe, B 1,145 mm TIN gold-coloured (SCRATCH-RESISTANT GOLD OPTICS) B=Width 3-pipe, B 815 mm 4-pipe, B 925 mm 5-pipe, B 1,035 mm 6-pipe, B 1,145 mm Please order dispensing taps in the dispensing taps section

CNS service column 3 to 4 conductors - 610 mm wide (incl. base) Base diameter Base diameter 139 mm Beam diameter 114 mm, 500 mm High (400 mm MH) CNS pedestal, WITHOUT TANK HANGERS, satin finish Beam optionally pointing to the left or right 3 conductive - 4 conductive - CNS pedestal, WITHOUT TANK HANGERS, polished Bar optionally facing left or right 3 conductors - 4 conductors - Please order taps in the Taps section The dispensing columns of type RJMF1 have the great advantage that the bar can be installed facing both left and right (this is even possible on site ) and the individual – listed separately below can be ordered according to requirements/application. Also „special panels“ with special drill holes (diameter, distance and number) according to your specifications are available after a short time (approx. 2 weeks).

CNS dispensing column, satin finish for BK160 Dispensing column for BK160 refrigerator, with 4 mounting holes in the flange, 77 mm pipe diameter, therefore suitable for pythons CNS dispensing column, single-pipe, 23 mm hole (without tap)

ATTENTION! For hose assembly, also order socket: for 7 mm order no. T26 for 10 mm order no. T27 For taps with 35 mm spigot Order spacer sleeve: Spacer sleeve 20 mm chrome order no. T10A Spacer sleeve 20 mm brass order no. T12A

Cover plates CNS 1 cm bevelled, for covering column holes. Cover shelf 220 x 220 mm without hole, Cover shelf 220 x 220 mm 45 mm hole, 60 mm hole, 90 mm hole, Cover shelf 280 x 280 mm 45 mm hole, 90 mm hole,

Crate dispensing column stainless steel Stainless steel dispensing column for 1 or 2 taps. The height in the centre of the tap is 400 mm. Dispensing column WITHOUT TAPS Dimensions: W/D/H 1-pipe, 140(95)/100/480 mm 2-pipe, 155(110)/120/480 mm Please order taps in the taps section!

Dispensing column Beer dispenser Double dispensing column 4 - 8 ltg. Here we offer you our popular double beer dispenser. With this dispenser you can install up to 8 taps (max. 4 taps per side) The beer dispenser can be ordered in various surface designs. Of course, this dispensing column is also used in the catering trade. The beer dispensing column is attached to the beer counter or beer bar using 4 x threaded rods Beer bar or beer counter counter. The fixing material is included in the scope of delivery. Technical specifications: Material: Stainless steel, with inspection flap for tap mounting Height: 454 mm, to centre of tap 400 mm Diameter of standpipe 108 mm 4 ltg. Width 2 x 450 mm 6 ltg. Width 2 x 560 mm 8 ltg. Width 2 x 670 mm Design: Matt brushed stainless steel Polished stainless steel Polished stainless steel TIN-gold coloured (SCRATCH RESISTANT GOLD OPTICS) Scope of delivery: Bar columns 4 x M8 threaded rods for fastening The dispensing column is supplied WITHOUT taps, please order these in the section Dispensing taps !

Dispensing column beer dispenser gooseneck Beer dispenser fashion swan neck Chrome or brass finish, WITHOUT TAPS Height 450 mm, height with beer tap centre 415 mm, base 142 mm Ø. Available versions: Chrome-plated brass 1-pipe Chrome-plated brass 2-pipe* Polished brass 1-pipe Polished brass 2-pipe* *Attention! Only suitable for 7 mm hose line! ATTENTION: For hose assembly, also order a socket: for 7 mm order no. T26, for 10 mm order no. T27 For taps with 35 mm spigots, order a spacer sleeve: Spacer sleeve 20 mm chrome order no. T10A, spacer sleeve, 20 mm brass order no. T12A Please order taps in the Taps section!

Dispensing column Beer dispenser model Adria Dispensing column model "Adria" incl. beverage line 6.7/9.5 5/8" thread for hand-turned tapHeight 504 mm, height centre of tap 430 mm, base 70 mm Ø. Design: Completely made of chrome, running to the right, from the bartender's point of view 1-pipe Completely made of chrome, running to the left, 1 pipe from the bartender's perspective Completely made of chrome, running to the centre, from the bartender's point of view, 1-line The dispensing column is supplied WITHOUT taps, please order these in the section Taps !

Dispensing column Beer dispenser model Bistro Dispensing column model "Bistro" incl. beverage line 6.7/9.5 mm 5/8" thread for tapHeight 480 mm, height centre of tap 350 mm, base: width 105 mm depth 130 mm Finish: chrome matt wood with chalkboard 1-line The dispensing column is supplied WITHOUT taps, please order these in the section Taps !

Dispensing column Beer dispenser Model Bolt Dispensing column model "Bolt" incl. beverage line and accompanying cooling 6.7/9.5 mm 5/8" thread for hand-turned tapHeight 415 mm, height centre of tap 350 mm, base 110 mm Ø. Design:Completely made of chrome 1-pipe The dispensing column is supplied WITHOUT taps, please order these in the section Taps !

Dispensing column Beer dispenser Model Break Dispensing column model "Break" incl. beverage line and accompanying cooling 6.7/9.5 mm 5/8" thread for hand-turned tapHeight 410 mm, height centre of tap 380 mm, base 90 mm Ø. Design: Completely made of chrome 1-pipe Completely made of chrome 2-pipe The dispensing column is supplied WITHOUT taps, please order these in the section Taps !

Dispensing column Beer dispenser Model Cavus Dispensing column model "Cavus" incl. beverage line and accompanying cooling 6.7/9.5 mm 5/8" thread for hand-turned tapHeight 380 mm, with medallion 485 mm Height centre of tap 365 mm, base 90 mm Ø. Design: Completely made of chrome 1-pipe (without advertising emblem) Completely made of chrome 2-pipe (without advertising emblem) Chrome - matt chrome 1-pipe (without advertising emblem) Chrome - matt chrome 2-wire (without advertising emblem) The advertising emblem in neutral can be ordered at an extra charge and is not included in the scope of delivery. The dispensing column is supplied WITHOUT taps, please order these in the section Dispensing taps !

Dispensing column for gastro counter model 9010 Dispensing column model „RJ9010“ Version CNS matt, CNS polished, TIN gold-coloured or copper polished with CNS polished base. Made of 2 angled copper or brass base tubes on a pyramid base and connecting piece made of stainless steel. Tube 104 mm Ø. Height 462 mm, height MH 410 mm, width 990 mm, weight 12 kg available finishes: CNS matt 6-pipe, CNS polished 6-wire, CNS TIN-gold coloured (SCRATCH RESISTANT GOLD OPTICS) 6-pipe, Polished copper, base CNS polished 6-wire, ATTENTION: the dispensing column is supplied without taps, please order your desired tap in the category Tap/dispensing tap Tap/beer tap

Dispensing column WITHOUT TAPS Model „Brauhaus“ made of polished stainless steel, with steam whistle and pressure gauge. With inspection opening on the host side. Height total 1,025 mm, height crossbar approx. 477 mm, height centre of tap 400 mm. Base 104 mm Ø, Cross tube diameter 154 or 168 mm. Tap spacing 110 mm. CNS, B=width 4-pipe, B 600 mm 5-pipe, B 740 mm 6-pipe, B 880 mm 7-pipe, B 1.020 mm 8-pipe, B 1,160 mm Dispensing taps please order in the dispensing taps section