Basket tap head Micro Matic keg closure type S with beverage catcher, stainless steel plunger Beverage connection R 5/8" Pressurised gas connection R 3/4" Non-return device basket tap head for cellar tapping for bar tapping (side outlet) low height A list of which KEG tap head belongs to which beer brand (brewery) can be found in our KEG tap head list For corresponding beer screw connections, please click on Beer screw connection

Beer stopcock for keg tap head on beer dispenser 5/8 inch Beer shut-off valve Beer stopcock for keg tap head small, 5/8 inch internal thread to 5/8 inch external thread. Small design for screwing onto the keg / tap headNo more beer backflow when changing kegs. Also suitable for the Köpi tap head.

Cleaning adapter for flat keg dispensing head MICRO MATIC Cleaning adapter for flat keg dispensing head For flat keg dispensing head for wall mounting made of stainless steel with water connection ALTERNTIV For flat keg dispensing head for wall mounting made of stainless steel, with chain Please specify: with 2 spouts or with 1 spout and 1 blind plug. Cleaning agents containing chlorine must not be used.

Cleaning container 9 litre stainless steel for beer dispenser Micro Matic cleaning container for easy cleaning of the new generation beer dispenser. Using the cleaning container to clean the beer dispenser: Cleaning container for beer dispenser with water and cleaning agent Cleaning agent fill up, push the tap head onto the container, open the tap until the cleaning liquid comes out, close the tap. Allow the cleaning liquid to stand in the dispensing system including the beverage line for 20 minutes, then open the tap and completely empty the beer line cleaning agent. Then tap (rinse) the beverage dispenser again with 2 complete water fillings of the cleaning container. The Micro Matic cleaning tank is new and made of stainless steel, the fittings are refurbished by the manufacturer. Choice of cleaning tanks for beer dispensers: With 1 beer fitting* of your choice With 2 beer fittings* of your choice With 3 beer fittings* of your choice With 4 beer fittings* of your choice With 5 beer fittings* of your choice When selecting more than one fitting, you can let us know after completing your order if you require different fitting types, simply reply to the order confirmation you have received, e.g. as follows: When selecting 2 x fitting=1 x flat fitting 1 x basket fitting. Of course, you can also give us the details by telephone. Do not use any cleaning agents that are corrosive to stainless steel. You can find beer pipe cleaning agents and accessories HERE *only refurbished fittings are used

CO2 intermediate pressure regulator Type Premium Micro-Matic, with safety valve For CO2, N2 and mixed gas. Nickel-plated brass, ball shut-off valve. Without nozzles and nuts. CO2 intermediate pressure regulator Micro-Matic 1-line, 3 bar

Co2 N2 intermediate pressure regulator Micro Matic Type Premium Micro-Matic, for CO2, N2 and mixed gas, nickel-plated brass, with ball shut-off valve, without nozzles and nuts. Version: 1-pipe (beer), 3 bar

Micro Matic Premium Plus CO2 pressure reducer 3 bar, 2-pipe Connection right Outlet AG 3/4" Cylinder contents pressure gauge 0-250 bar SK 184-037

CO2 pressure reducer battery Micro Matic with integrated safety valves, stopcocks with cylinder content indicator, connection right, 2 x separate regulation, stopcock You can choose the following version: 2 x pressure 3 bar for beer 2 x pressure 7 bar for AFG (1/2 inch) On request with: Wall plate + adapter for attaching the pressure reducer to the wall Wall plate

CO2 pressure reducer Micro Matic 3 bar Type Premium brass nickel-plated, 0-6/3 bar without nozzle and nut. Working pressure gauge 0-6/3 bar Cylinder contents pressure gauge 0-250 bar. 1-line, 3 bar 2-pipe, 3 bar on request with wall plate for fixing the pressure reducer to the wall You can find more Co2 pressure reducers and tapping fittings HERE Co2 pressure reducer for beverage dispensing systems - perfect control over the carbon dioxide content A Co2 pressure reducer for beverage dispensing systems is an indispensable tool for every beer lover. The pressure reducer regulates the pressure in the dispensing system and ensures that the beer is carbonated with the right amount of carbon dioxide. Without the pressure reducer, the beer would contain too much carbon dioxide and would therefore be undrinkable. The design of a Co2 pressure reducer for beer is simple: the dispensing system is connected to the pressure reducer via a hose, which in turn is connected to the CO2 bottle via another hose. The pressure reducer regulates the pressure of the CO2 gas, which carbonates the beer. The pressure reducer usually has a pressure gauge, which displays the current pressure and therefore allows you to control the carbon dioxide content. A Co2 pressure reducer for beer dispensing systems is not only important for the catering industry, but also for private households. Using a pressure reducer for beer dispensers ensures that the beer always has the right amount of carbon dioxide and therefore offers a perfect drinking experience. The pressure reducer for dispensing systems is available in various designs and can be used for different applications. For example, there are pressure reducers for dispensing systems with one outlet for one dispensing system or for several dispensing systems. All in all, a Co2 pressure regulator for beverage dispensing systems is an indispensable tool for every beer lover. With the pressure regulator for dispensing systems, you have perfect control over the carbon dioxide content and therefore a perfect drinking experience. Whether for private or commercial use - no beer dispensing system should be without a co2 pressure regulator for dispensing systems.

CO2-AFG pressure regulator type PremiumPLUS Connection right, outlet AG 1/2"Cylinder contents pressure gauge 0-250 bar SK 184-036 Better control thanks to visible tamper protection. 7 bar

Combination tap head Micro Matic keg closure with beverage catcher, stainless steel plunger Beverage connection R 5/8" Pressurised gas connection R 3/4" Non-return device Combi tap head for cellar tapping for bar tapping (outlet on the side) low overall height ATTENTION: Please note that the Kmobi KEG tap head is not a universal tap head. A list of which KEG tap head belongs to which beer brand (brewery) can be found in our KEG tap head list For corresponding beer screw connections please click on Beer screw connection

Compensator dispensing tap C-TAP made of Micro Matic chrome-nickel steel Housing CNS polished or CNS gold look. With foam button. Body, piston, compensator and thread made of CNS. Threaded connection 55 mm. SK-184-030

Flat KEG tap head Micro Matic keg closure with beverage catcher, stainless steel plunger Beverage connection R 5/8" Pressurised gas connection R 3/4" Non-return device Flat tap head for cellar tapping for bar tapping (side outlet) low height, tapped 115 mm high A list of which KEG tap head belongs to which beer brand (brewery) can be found in our KEG tap head list For corresponding beer screw connections, please click on Beer screw connection

Micro Matic tap head keg for draught beer Beer keg keg head Keg closure Dispensing system As not all beer kegs have the same connection, it is important to use the right keg head. There are 4 keg systems: Flat system Combi system Basket system Draft system

Guinness keg tap head for Guinness beer keg closure Manufacturer Micro Matic with beverage catcher, stainless steel plunger Beverage connection R 5/8" Pressurised gas connection R 3/4" Non-return valve for cellar tapping A list of which KEG dispensing head belongs to which beer brand (brewery) can be found in our KEG tap head list For corresponding beer screw connections please click on Beer screw connection

Guinness tap beer stout tap stainless steel Guinness stainless steel tap from Micro Matic with "Creamplate" for the typical Guinness foam 55 mm spigot 7 mm pipe diameter alternatively with plastic spout (included in the scope of delivery) This tap can also be used for cold-brewed coffee

Intermediate pressure regulator, 1-pipe, MicroMatic Premium 7 bar 1-pipe 7 bar for CO2, N2 and mixed gas with wall bracket for mounting Connection right and left AG 5/8" Outlet AG 3/4" SK 016-109

Intermediate pressure regulator, 3BAR, MicroMatic PremiumPlus 1-pipe 3 bar for CO2, N2 and mixed gas with wall bracket for mounting Connection right and left AG 5/8" Outlet AG 3/4" SK 184-035

König Pilsener tap head Micro Matic keg closure with beverage catcher, stainless steel plunger Beverage connection R 5/8" Pressurised gas connection R 3/4" Non-return valve König Pilsener tap head for cellar tapping for bar tapping (side outlet) low height A list of which KEG dispensing head belongs to which beer brand (brewery) can be found HERE ATTENTION: for this tap head you need a beer stopcock, see accessories above!!!

Micro Matic beer stopcock CNS Beer stopcock CNS small, 5/8" female thread, 5/8" male thread, small design, for screwing onto KEG tap head

Beer stopcock bent made of stainless steel for screwing onto KEG tapping heads or tap spouts, with fixed spout. Beer tap, bent NW 7 mm bent NW 10 mm bent

Beer stopcock straight made of stainless steel for screwing onto KEG tapping heads or with fixed spout. Beer stopcock, straight NW 7 mm straight NW 10 mm straight

Beer tap Micro Matic C-TAP made of stainless steel Beer tap, piston tap C-TAP made of stainless steel housing CNS polished or CNS gold look. With foam button. Housing, piston and thread made of CNS. 55 mm threaded connection. Micro Matic sets new standards in the beer tap sector with its new design and supplies this beer tap in the usual premium quality. SK-184-029

MICRO MATIC Cleaning adapter for Basket fitting for Wall mounting made of stainless steel, with Water connection ALTERNTIVE made of stainless steel, with chain Please specify: with 2 spouts or with 1 spout and 1 blind plug No cleaning agents containing chlorine may be used