Beer hose, Co2 line

1 metre beverage hose with approved SK number 10 mm ID 16 mm OD up to 3 bar pressure load very soft, flexible and crystal clear suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine Please specify how many metres you require in the quantity. Hose is supplied in one piece

100 mtr. 10 mm beer hose beer Co2 hose  100 meters of beverage hose with approved SK - number.

150 metre 7 mm beer hose Beer Co2 hose 150 metre beverage hose with approved SK number.

2 mtr. 10 mm beer hose Co2 hose beer dispenser by the metre You are buying 2.0 metres of beverage hose with an approved SK number Please specify how many 2 metres you require in the quantity. Hose is supplied in one piece e.g. if you enter a quantity of 10, you will receive 20 metres in one piece. 10 mm ID 16 mm OD up to 8 bar pressure load

2 mtr. 4 mm beer hose Co2 hose beer line by the metre You are bidding on 2.0 metres of beverage hose with an approved SK number. Please specify how many 2 metres you require in the quantity. Hose is supplied in one piece e.g. if you enter a quantity of 10, you will receive 20 metres in one piece. 4 mm ID 8 mm OD up to 11 bar pressure load

2 mtr. 7 mm beer hose Co2 hose beer line by the metre You are bidding on 2.0 metres of beverage hose with approved SK number 366-004. Please specify how many 2 metres you require in the quantity. Hose is supplied in one piece e.g. if you enter a quantity of 10, you will receive 20 metres in one piece. 7 mm ID 12 mm OD up to 8 bar pressure load

200 mtr. 4 mm beer hose Beer Co2 hose 200 mtr. 4 mm beer hose Beer Co2 hose with approved SK number. 4 mm ID 8 mm OD up to 11 bar pressure load

50 mtr. 10 mm beer hose Co2 hose soft crystal clear flexi 50 metre beverage hose with approved SK number 10 mm ID 16 mm OD up to 3 bar pressure load very soft, flexible and crystal clear suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine

50 mtr. 7 mm beer hose Co2 hose soft crystal clear flexi 50 metre beverage hose with approved SK number 7 mm ID 12 mm OD up to 7 bar pressure load very soft, flexible and crystal clear suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine

Armaflex Adhesive tape 15 m roll for self-assembly of pythons self-adhesive, B2 • roll size: 15 m x 50 mm x 3 mm. • Colour: black

Beer hose beer line complete 10 mm hard 1,7 mtr.  This hose consists of: 1,7 mtr. 10 mm beer hose with SK sign both sides with 5/8" connection each with wing nut  one bent grommet one straight grommet

Beer hose Beer pipe + Co2 hose complete for beer These hoses consist of: 1.7 mtr. 7 mm beer hose with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 1.7 mtr. 4 mm Co2 hose with SK mark with 3/4" connection on both sides, each with wing nut two straight nozzles

Beer hose Beer pipe complete 4 mm 2 mtr. This hose consists of: 2 mtr. 4 mm beer hose with SK mark with 5/8" connection on both sides a curved nozzle (stainless steel) with hexagon nut (connection to the tap) one straight spout (stainless steel) with wing nut

Beer hose Beer line complete 4 mm 2 mtr. tap system Beer hose in 4mm and 2m long, completely ready for use This beer hose is ideal for anyone who keeps their beer cold and uses a piston tap, e.g. for a beer bar (dispensing system with fridge). We recommend a working pressure of 0.9 - 1.2 bar, so that the beer can be tapped over a longer period of time without carbonising. This hose consists of: 2 mtr. 4 mm beer hose with SK mark with 5/8" connection on both sides a bent stainless steel nozzle with seal and hexagon nut one straight stainless steel spout with seal and wing nut We are happy to assemble the hoses according to your requirements, please contact us. Absolute hammer price!!! Brewery quality!!! For further hose material and connection material please click on Connection material

Beer hose Beer pipe complete 7 mm 1.7mtr. This hose consists of: 1.7 mtr. 7 mm beer hose with SK mark on both sides with 5/8" connection, wing nut + 6kt nut one bent spout one straight nozzle

Beer hose Beer pipe crystal clear 7 or 10 mm crystal clear Pressure load: 7 mm=9.7 bar, 10 mm=6.5 bar. PVC beer hose NW 7 mm (7 x 12 mm) NW 10 mm (10 x 16 mm) Price per metre. ATTENTION: GRADUATED PRICE !!!!

Beer hose Co2 hose nozzles nuts tapping system beer tapping system beer pipe 1.) Co2 spout straight 2.8 mm 1 piece is used on Co2 hoses / Material: nickel-plated brass, with seal Length: 28 mm Nipple length: 15 mm Nipple outer diameter: 5 mm Nipple inner diameter: 2.8 mm clamp required: 4 mm small (9.5 mm) required hose: 4 mm inside suitable nut: 5/8"; 3/4"; as hexagon or wing nut 2.) 2.7 mm beer hose nozzle straight 1 piece is used on beer and Co2 hoses / material: nickel-plated brass, with seal Length: 39 mm Nipple length: 20 mm Nipple outer diameter: 9.5 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 3.) 10 mm beer spout straight 1 piece can be used on beer and Co2 hoses / material: stainless steel, with seal Length: 35 mm Nipple length: 18 mm Nipple outer diameter: 11.5 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 4.) 7 mm hose nozzle bent 1 piece can be used on beer and Co2 hoses / material: nickel-plated brass, with seal Dimensions: 53 x 43 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nuts 5.) 10 mm hose nozzle bent 1 piece is used on beer and Co2 hoses / material: stainless steel (only available in stainless steel) with seal Dimensions: 53 x 53 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 10 mm required clamp: 10 mm (19.2 mm clamping range) required hose: 10 mm hard or soft (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 6.) 4 mm spout straight stainless steel 1 piece can be used on beer hoses / material: stainless steel, with seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 4 mm clamp required: 4 mm large (10.5 mm clamping range) required hose: 4 mm (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut Note! Difficult to fit in hose, hot air gun required. 7.) 7 mm spout straight stainless steel 1 piece is used on beer hoses / Material: stainless steel, with seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 8.) 10 mm spout straight stainless steel 1 piece can be used on beer hoses / material: stainless steel with moulded seal Length: 38 mm Nipple length: 20 mm Nipple outer diameter: 12 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 9.) 4 mm spout bent stainless steel 1 piece can be used on beer hoses / material: stainless steel with seal Dimensions: 50 x 50 mm Nipple length: 20 mm Nipple outer diameter: 6 mm Nipple inner diameter: 4 mm clamp required: 4 mm large (10.5 mm clamping range) required hose: 4 mm (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut Note! Difficult to fit in hose, hot air gun required. 10.) 7 mm spout bent stainless steel 1 piece is used on beer hoses / Material: stainless steel with seal Dimensions: 60 x 46 mm Nipple length: 20 mm Nipple outer diameter: 9 mm Nipple inner diameter: 7 mm clamp required: 7 mm (14.8 mm clamping range) required hose: 7 mm soft or hard (inside) suitable nut: 5/8"; 3/4"; as hexagon or wing nut 11.) 10 mm spout bent stainless steel 1 piece is used on beer hoses / material: stainless steel with moulded seal Dimensions: 56 x 52 mm Nipple length: 20 mm Nipple outer diameter: 12 mm Nipple inner diameter: 10 mm clamp required: 10 mm (19.2 mm clamping range) required hose: 10 mm soft or hard (inside) 12.) 3/4" wing nut brass 1 piece is used on CO2 hoses / material: nickel-plated brass fits over all nozzles shown above Inner dimension: approx. 26.16 mm 13.) 5/8" hexagon nut brass 1 piece is used on beer hoses / material: nickel-plated brass fits over all spouts shown above Internal dimension: approx. 22.63 mm Width across flats: 25 14.) 3/4" hexagon nut brass 1 piece is used on CO2 hoses / Material: nickel-plated brass fits over all nozzles shown above Internal dimension: approx. 26.16 mm Width across flats: 30 15.) 4 mm clamps small 10 pieces suitable for thin nozzles such as Co2 nozzle 2.8 mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 7.3 - 9.0 mm 16.) 4 mm clamps large 10 pieces suitable for thicker spouts such as beer spouts 4 mm stainless steel Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 8.5 - 10.5 mm 17.) 7 mm hose clamps 10 pieces suitable for beer and Co2 nozzle 7mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 12.3 - 14.8 mm 18.) 10 mm clamps 10 pieces suitable for beer and Co2 nozzle 10 mm Material: Stainless steel, ASI 304 / 301 Material: 1.4301 / 1.4310 Clamping range 16.0 - 19.2 mm 19.) Clamping pliers 1 piece commercially available pinching pliers, required to pinch clamps around the grommets 20.) 4 mm hose by the metre Beverage hose with approved SK number 4 mm ID 8 mm OD up to 11 bar pressure load suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine slightly milky and very flexible for quantity=number of metres; delivery in one piece up to 200 mtr. 21.) 7 mm soft hose by the metre Beverage hose with approved SK number Size 7 x 12 mm suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine very soft, flexible and crystal clear Pressure load up to 3 bar for quantity=number of metres; delivery in one piece up to 50 mtr. 22.) 10 mm soft hose by the metre Beverage hose with approved SK number Size 10 x 15.6 mm suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine very soft, flexible and crystal clear Pressure load up to 3 bar for quantity=number of metres; delivery in one piece up to 50 mtr. 23.) 7 mm hard hose by the metre Beverage hose with approved SK number 7 mm ID 12 mm OD up to 8 bar pressure load suitable for all beverages e.g. beer, spirits, soft drinks or wine slightly milky and still flexible for quantity=number of metres; delivery in one piece up to 150 mtr. 24.) 10 mm hose hard by the metre Beverage hose with approved SK number 10 mm ID 16 mm OD up to 8 bar pressure load suitable for all beverages e.g. beer, spirits, soft drinks or wine slightly milky rigid, less flexible hose for quantity=number of metres; delivery in one piece up to 100 mtr. 25.) Co2 hose completely assembled 1.7 mtr. 1.7 mtr. Co2 hose with SK mark with 3/4" connection on both sides, each with wing nut two straight spouts 26.) 7 mm soft beer hose completely assembled 1.5 mtr. 1.5 mtr. 7 mm beer hose soft and crystal clear with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 27.) 7 mm beer hose hard completely assembled 1.7 mtr. 1.7 mtr. 7 mm beer hose with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 28.) 10 mm soft beer hose completely assembled 1.5 mtr. 5 mtr. 10 mm beer hose soft and crystal clear with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout 29.) 10 mm beer hose hard completely assembled 1.7 mtr. 1.7 mtr. 10 mm beer hose with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout

Beer hoseCO2 hose for tapping systems 7mm soft crystal clear By the metre Item properties Beer hose for tapping systems: 1 metre beverage hose with approved SK number 7 mm ID 12 mm OD up to 3 bar pressure load very soft, flexible and crystal clear suitable for all beverages e.g. beer, spirits, non-alcoholic drinks or wine Please specify how many metres you require in the quantity. Hose is supplied in one piece

Beer hose soft clear complete 10 mm 1.5 mtr. This hose consists of: 1.5 mtr. 10 mm beer hose, soft and crystal clear with SK mark 5/8" connection on both sides, each with wing nut one bent stainless steel spout one straight stainless steel spout

Beer hose soft clear complete 7 mm 1.5 mtr. This hose consists of: 1.5 mtr. 7 mm beer hose, soft and crystal clear with SK mark with 5/8" connection on both sides, each with wing nut one bent spout one straight spout

Beer hose, beer pipe, by the metre in 7 mm / 10 mm crystal clear, flexible You are bidding on one metre of 7 mm or 10 mm beer hose The specified quantity is the number of metres in one piece, e.g. 5 x 10 mm=5 metres of 10 mm beer hose High-quality beer hose for the catering trade NW 10 mm x 16 mm / 3 mm wall thickness NW 7 mm x 12 mm / 2.5 mm wall thickness 3 bar at 20 degrees C

Beer pipe BeveragesCO2 pipe for non-alcoholic beverages, beer, wine and spirits,CO2. By the metre Pressure load: 4 mm=11 bar 7 mm=8 bar 10 mm=8 bar NW 4 mm (4 x 8 mm) NW 7 mm (7 x 12 mm) NW 10 mm (10 x 16 mm) Price per metre. ATTENTION: BATCH PRICE!(see above)

Beer pipe Lindr beer cooler 1.5 mtr. long 1 x plug with locking ring 1 x 5/8 inch beer screw connection fully assembled

Beer pipe for gooseneck columns 1.5 mtr. beer pipe NW 7 (7/12 mm) one side with crimp fitting for 7/8 mm stainless steel pipe one side with beer screw connection (7 mm grommet/5/8" 6.-ct. nut) Nut