Friga poppy evaporator MR

Friga-Bohn Evaporator MR

MR  series from MR135R to MRE270E
Evaporator FRIGA-BOHN
The evaporators of the MR series are designed to equip
cold rooms for refrigeration or freezing
. The 6 models of the MR series cover a
power range from 840 to 2,620 W.



ISO 9001:
Our company is certified by LRQA through the quality assurance system ISO
9001 2000.
RoHs - WEEE: Our products are compliant with the European
Directive 2002/95/CE and 2002/96/CE regarding electrical and electronic
equipment.

CE:

Our products are compliant according to the European Directive.
GOST: Our products are compliant with CIS standards.

MR series evaporators are designed to equip
cold rooms for refrigeration or freezing.

The 6 models of the MR series cover a power range from 840 to 2,620 W.

High performance heat exchangers 

the fin blocks of the MR series consist of sinusoidally corrugated aluminum fins

with a fin spacing of 4.23 or 6.35 mm and internally finned copper tubes.
On the MR 270/250/ and MRE 135/120 to MRE 270/250 models, refrigerant distribution is via a
venturi distributor.
The MR battery is fully protected with polyester against, among other things, corrosive atmospheres
Fans
TheMR andMRE series is equipped with a fan. It is operated with a motor connected to the terminal box
(except forMR 75/65), 50-60 Hz in closed version, class B, with impedance protection and permanent lubrication.
the protective grids comply with safety standards.
Housing

The housing made of recyclable ABS stands for:
Robust design: high resistance to thermal shocks
(at high and low temperatures) and high mechanical strength,
Aesthetic design: the external shape, the careful finishing
and the white textured surface allow these devices to be harmoniously integrated into
their environment. MR slats with polyester finish.
Hygiene: thanks to the rounded corners, bacteria-promoting
deposits are avoided. Improved hygiene by using
non-oxidizing parts (e.g. stainless steel fixing screws),
Safety: No sharp corners or edges
Defrosting:

The electric heating elements (230 V, single-phase) are mounted in slots
under the battery and connected to a terminal box
(only on theMRE series). This arrangement
makes all maintenance operations much easier
and achieves a homogeneous heat distribution in the battery
. This leads to proper defrosting.
The condensate is collected in an intermediate drip tray
and discharged through a large nozzle (Ø 1“ G).

EASY ACCESS:

The structure of the MR has been designed with a view to facilitating all
assembly operations for commissioning,maintenance and cleaning
. Through the
polyamide hinges attached to the housing, all evaporator parts are completely
accessible (battery, fan motor, heating rods of the defrost heater,
connections ... ). Through these hinges, the housing
can be completely removed.