Filling tap head beer keg itself

Filling keg beer keg filling head itself

KEG dispensing head for filling beer kegs with KEG connection.
First, the keg is pre-charged with carbon dioxide via stopcock . To do this, close the stopcock.
The desired keg pressure, e.g. 1 bar, can be set using the adjustment screw. If this set
pressure is exceeded in the barrel, the valve blows off the excess pressure. When the correct pressure is reached, the tap is closed and then the
CO2 line is unscrewed. The beer line is screwed on.

Open both taps for filling. The keg is filled. If the keg pressure increases, the valve automatically blows off (as described above).
If beer comes out of the tap, the keg is full. Close all 2 taps and remove the tap head from the keg.

Available versions:

• Flat fill nozzle
• Combi filling nozzle
• Basket filling tap head