Cleaning adapters for beer taps and keg dispense heads: maximum hygiene for perfect beer

Adapter for series connection Tap head cleaning adapter for KEG for series connection, can be combined, made of plastic Cannot be mounted on wall bracket. Köpi KEG Cap must not be pushed down completely. Adapter for series connection Basket/Köpi Flat/combination

AFG pipe with 6 tank valves CC, (Coca Cola) ALTERNATIVE AFG pipe with 6 tank valves NC, (Pepsi Cola and Sinalco Cola) 6 valves

Cleaning adapter for beer tap dispensing system You need this cleaning adapter to clean your dispensing system chemically and mechanically in accordance with the guidelines.

Bevi free set 10 mm adapter (set of 2 pieces)

Tap head cleaning adapter Basket - 5/8" IG made of plastic Flat/combi - 5/8" IG made of plastic Guinnes

Wall bracket for The following tap head cleaning adapter with 5/8" connection (suitable for sponges). Attention! For these wall holders, you must order the cleaning adapters with thread below; the adapters can be combined with and are interchangeable

Bevi wall bracket with 5/8" connection Wall bracket for the following Tap head cleaning adapter with 5/8" connection (suitable for sponges). Attention! For these wall brackets you must use the following Cleaning adapter (image 2 both combined) with thread, the adapters can be combined and are interchangeable

Cellar connector Beer pipe Beer hose connector Double nipple Bar dispensing system You need this to connect two beer lines together when cleaning the beer line. 2x 5/8" external thread Inner diameter 10mm

Cleaning adapter Dispensing tap adapter Beer tap Dispensing system Beer cooler Please select your desired item in the selection window 5/8" Gardena connection 5/8" nut + 10mm spout 28 mm thread with Gardena 28 mm thread with 5/8" AG 28 mm thread with grommet 30 mm thread with 5/8" AG 30 mm thread with grommet 30 mm thread with Gardena 40 mm thread with grommet 34 mm thread with grommet 32 mm thread with grommet 33 mm thread with 5/8" AG 33 mm thread with grommet 33 mm thread with Gardena

Cleaning adapter for flat keg dispensing head MICRO MATIC Cleaning adapter for flat keg dispensing head For flat keg dispensing head for wall mounting made of stainless steel with water connection ALTERNTIV For flat keg dispensing head for wall mounting made of stainless steel, with chain Please specify: with 2 spouts or with 1 spout and 1 blind plug. Cleaning agents containing chlorine must not be used.

Cleaning adapter for tap / beer tap For which beer taps does the cleaning adapter fit? Dispensing tap thread 30 mm: SK 020.054 Piston tap SK 020.055 Compensator tap SK 083.035 (BT50) Compensator tap SK 196.002 Piston/compensator tap (before 1999) SK 240.001 Piston/compensator tap SK 255.001 Compensator stopcock SK 267.005 Piston/compensator stopcock SK 287.001 Piston/compensator stopcock SK 306.001 Piston/compensator stopcock SK 339.001 Piston/compensator tap Tap thread 28 mm: SK 009.023 Ball valve SK 009.024 Piston/compensator tap (after 1995) SK 016.054 Plug valve with toothing SK 016.077 Piston valve (after 1995) SK 016.080 Compensator stopcock (after 1995) SK 020.029 Piston valve SK 020.032 Compensator tap SK 083.035 Piston/compensator tap (BT150/BT200) SK 168.009 Wine dispensing tap X 2 SK 168.012 For Mod V10 SK 168.013 For Mod V20 SK 196.002 Piston/compensator tap (after 1999) SK 168.007 For Mod. Speedy X, Premix SK 265.014 Ball valve SK 196.003 Piston/compensator valve SK 301.001 Ball valve SK 305.001 (after 1997) SK 311.001 Expansion joint tap You can find further articles for beer line cleaning HERE

Cleaning adapter with Gardena connection In conjunction with the Gardena connection with 5/8“ internal thread, you can simply use your water hose with Gardena connection for cleaning

Fitting Assembly screw-in adapter RS-A/M Flat/combination Fitting VA Assembly screw-in adapter Compartment/combination ALTERNATIVE Assembly screw-in adapter Basket fitting RS-SO/RS-SOR Assembly screw-in adapter Basket

Gardena cleaning adapter + 5/8" male thread for tap system Adapter Gardena to 5/8" male thread for connection of beer hose with 5/8" screw connection Use: rinsing the dispensing system with water incl. sponge Emptying the beer dispenser of beer Cleaning the beer dispenser with Gardena water hose connection

MICRO MATIC Cleaning adapter for Basket fitting for Wall mounting made of stainless steel, with Water connection ALTERNTIVE made of stainless steel, with chain Please specify: with 2 spouts or with 1 spout and 1 blind plug No cleaning agents containing chlorine may be used

MICRO MATIC cleaning adapter for Kombi KEG dispensing head Please note that the Kombi keg dispensing head is a stand-alone system and cannot be used for all other keg dispensing heads. Selectable version of the Micro Matic cleaning adapter for KEG dispensing head: for combi fitting for wall mounting made of stainless steel, with water connection ALTERNTIV for stainless steel combination fitting, with chain for 2 x KEG tap head For wall-mounted version, please specify: with 2 spouts or with 1 spout and 1 blind plug No cleaning agents containing chlorine may be used.

Tap cleaning adapter for the following beer tap: SK 030.014 Piston tap SK 030.029 Compensator tap SK 030.036 Guinness tap SK 305.001 Piston/compensator tap (before 1997) SK 009.024 for piston/compensator stopcock (before 1995)